Configure WiFi Router as a Repeater! Connect two WiFi Routers Wirelessly!

[@torogipro]

Don't Forget to Subscribe Like and share my videos!

[@CollosalTrollge]

hi , how do i do this if i have a d-link router connecting to pldt router. i do not have my pldt router password but i am assuming this doesnt matter, so long as it gets internet already. i dont see the section that operation mode, maybe its different on d-link. Appreciate if u can come back to me?

[@emmanuellenavales5860]

Hi sir i have Globe Tattoo B315s-938 and i cannot find any firmware for it. Can you help me plss. Do we have any alternative?

[@prashantgautam9234]

It does not work bro

[@michapiechalak1189]

Michał Piechalak 7

[@Anjif]

@@CollosalTrollge ko sa mga gantong r uni ako rt5tttt na lang po ako sa adopt a baby boy friend ko na lang po ako sa adopt a baby boy friend ko na

[@mainormurillo7254]

The funny thing about posting stuff in KZbin is that You never know the impact of someone knowledge to the person in need of it, thanks a bunch!

[@joo7454]

5:02 starts for old routers.

[@hosswindu166]

Thank you.

[@beef0rtress]

Was thinking to sell my old router and get a wireless repeater. Finally found this vid. Thanks so much bro!

[@avadhootishtake6245]

Great video! Very simple and straightforward explanation. Now I can easily extend my wifi signal to the 2nd floor without the hassle of LAN cables.

[@ashishdwivedi4432]

Pls confirm if this video helps you

[@manishpramanik3341]

Thanks a lot. In midst of gibberish finally found something relevant I was looking for. Also demonstration is to the point and not boringly lengthy. Thumbs up.

[@jessarce]

Another great tutorial! This is just what I needed. Now I don't have to waste much money on buying cables to extend my WIFI. Double Thumbs Up! However, ddwrt has a very limited router firmwares. Hope there are other firmwares we can use to make use old router! Thanks!

[@sidharthmail1]

I tried so many videos, this was a perfect one.

[@japanijoota6190]

was stuck because I did not disable DHCP server of non root router. Now things make sense. You saved me from spending some bucks, thanks.

[@funp2154]

Thanks so much for clarifying on how to set up the router as a extender with out running cables 👍

[@itsJeaaan1]

I’m having trouble to update mine. At 7:50 i’d be uploading the software but maybe 1% in it gives me an error. I’m not sure to which wifi I should be connecting. Because my main router is from pldt, and my repeater is linksys. And the firmware page switches to the pldt one (which i dont want), but if i click my linksys router it just doesnt upload because it doesnt have internet.. I’m a little confused there on what to do

[@alingondrozario]

It really helped me to update my W-LAN Router Firmware. Thank you so much.

[@udayparthiv6778]

Ddwrt doesn't have my router. It's TC7200.d1l, how do I find my firmware upgrade?

[@MajidOfficial-uc2yp]

after long time i see one video which is very informatic , thanks

[@GaelyneGasson]

Thanks! Took notes and plan to set this all in motion tomorrow! And I subscribed too!

[@amirtaba8600]

Useful,simple and easy to understand. Great content Sir,Thank you

[@ukirfan]

excellent explanation for old router upgraded as repeater. thanks

[@Nordbiene]

Really GREAT. Thank You so much! Best regards, Kai from Kiel (Germany)

[@AM-dn4lk]

This was awesome. Thank you for a great tutorial. I am doing this!

[@hamzaasar5929]

Hello, i followed all of these rules but i really couldnt understand them well, my router is a Tenda and its been factory reset, i want to use it as a repeater and my main router is a Huawei and it used Vodafone Fibre, i dont have any long Ethernet cables in my house but i have short ones to connect to my laptop and stuff. Is there a chance if i make all of these configurations then remove all the lan cables then put my router somewhere else in my house that it will work?

[@PrashantNagar333]

Dear Like your work. Will check is it working or not on my old Routers.. Your introduction

[@biashacker]

Hey man thanks for this information. I am in Africa and this really helped me out a lot. One of the problems I had with my mofi is that I had to change a numeral in my IP router (repeater) address so it did not match the SSID signal router I was trying to repeat. Great information. Keep up the good work.

[@dariusEMPEROR]

after you finished setting up the repeater, can you disconnect it and have it communicate with the master only trough wifi and still be a repeater? thanks!

[@torogipro]

Yes bro

[@dcv1979]

Sala-salamat padli! Mayat tapnu mausar ko tay daan nga Linksys ko. Keep it up padli! 👌🏽

[@videophile222]

Thank you. Very well explained.

[@MrVipulLal]

Good tutorial, mate. Thanks!

[@ramalakshmi4333]

Ddwrt did not firmware for my model router What are my options now ?

[@temoa81]

I typed in the model # "firmware download" into a browser and found opensource download on another site.

[@soaale4841]

mayat man kabayan ta videom. informative. maaramat ko diay old router mi nga repeater. salamat..

[@torogipro]

Welcome kabayan.

[@jamesharris3192]

Thanks you are really clear and give maximum information to sorting this for me. I could do with you being a little slower but hey I am slow Joe. Brilliant vid keep it up..

[@MajidOfficial-uc2yp]

i have router tp-line model TL-WR886N But i could not found and firmware, can you help me out to get this one

[@micp6029]

where was the other end of the yellow ethernet cable connected to? I am trying to do this on my linksys router

[@RamachandraBK1248]

Hi, I have a delink DSL-224 wireless old router. I cannot see operation mode selection you are talking about. Can you help?

[@CLCinflorida]

Torogi, I love your Awesome Tutotial Videos, I just wish you wouldn't have so many Cups/Pots of Coffee before you record 😉😂 Can you tell us where the other end of the Cables are plugged into... are they plugged into a Modem 🤔 I'm an old lady trying to figure it out... 🤗👍

[@Toyotacall]

Hi. You talked showed us to set the second router up as a REPEATER and then all of a sudden you change to WiFi BRIDGE. I am confused now.

[@PSVPK]

No option of repeater mode in tp link Archer c80 model... Any other way to set it up?

[@johnpatrickrodriguez9619]

May I ask, if I use LAN cable and connect it to the router repeater, can I also get connection?

[@jianxiongRaven]

So the wifi repeater can be used a switch right? Since it has a switch built in

[@terbanz015]

Hi Sir, I've followed the video and configured my old router as shown but I cannot see same SSID broadcasted, it's still showing the main PLDTfbr router. Is it the problem with my main router? I saw some video that WDS bridging should be enabled from the main router which I cannot found on my pldt router.

[@michaelchaves3033]

Oustanding explanation and demo

[@chooch1353]

Hey! Thanks for the video. What about performance ? How much does it impact on bandwidth/speed ?

[@DxV04]

Exactly what I was looking for!

[@mikeallover]

I liked your google home page map!

[@dallaspilotcar9293]

Great video . Thank you for explaining in detail

[@SeanKirstenRealty]

Thank you so much. Your tutorial made my day. Keep sharing

[@LutfurRahman-u6v]

A super like 🎉🎉🎉🎉🎉 Worked like magic

[@mohammedalgomaty2173]

Thank you very much. This was the best tutorial

[@danabarnes4751]

Cool! I'll give this a try. Thank you

[@MrDylanSainsbury]

Awesome video thanks!

[@ramonadolese97]

Please help. My Android phone hotspot only allows 1 device to connect at a time. I thought by getting a router I could connect the hotspot to the router, Belkin N150, then connect other devices to router. Well, I'm chasing my tail it seems. I can't get it to work. I feel I'm missing something in configuring it. Any advice?

[@DKDaniel244]

question: Does all old router like huawei can be a wireless repeater? bcoz I cannot see "GAN4PT and HG6245D" from dd-wrt site and I cannot see another open datebase site to configure my router. I hope you will answer.

[@ryenis]

will I able to access the ip configuration on the repeater if the IP web search is blocked on the main router (context: school dorm wifi) I want to add a wifi extender (tp link) but I think the wps button has been disabled

[@Odinson1604]

I like your shirt. Love the vid too. Mad love from NZ

[@GeorgeAlcantara-vw9kr]

thanks for your help beforehand i want to add linksy velop mesh to repeater router

[@subhashbhojwani8976]

Great video again - thanks for the clear explanation. Unfortunately there is no DDWRT firmware for my old router version.

[@UnWrittenKatsu]

So with all of this am I capable of plugging in this router anywhere in my house that has a wireless connection to my main router/modem?

[@torogipro]

yes amigo

[@hardtokill15]

@@torogipro Without having the second router connected via ethernet cable?

[@torogipro]

@@hardtokill15 yes bro

[@sailebarts5300]

@@torogipro will this wireless repeater have slower connection than the one connected via ethernet cable? Or will it have the same speed? Hoping you would anseeer 🙏

[@africanqueenproject]

Great job of explaining things .. I subscribed .. but could you slow down just a bit in future videos when your going thru the configuration steps on your computer ...

[@beaviver15]

Yes, that would help me as well. I also had trouble hearing this video. It was much more quiet and the sound not nearly as clear as the first one I watched of yours. I appreciate your dedication to helping others by sharing your knowledge. Thank you for being so generous with your time.

[@bommidala]

Hi, Thanks your videos are crisp and very clear. Can you please make a video on how to add a paid vpn service like HMA etc to a router. Many Thanks.

[@rajkumarravindrasawantrk69]

Thanks dude, you just saved some of my money. I was going to purchase a LAN cable to do this thing. 😊❤

[@explorewithping5757]

for some reason, my upgrade failed. i followed the steps downloaded the firmware, and it failed. do i need to do soemthing with the routher before upgrade? like reboot?

[@ethanhunt_za]

On the secondary router that you use as a repeater will you be able to use the ethernet ports and connect it to a pc to use the internet

[@torogipro]

Yes amigo.

[@ethanhunt_za]

@@torogipro great👌

[@gremararida8459]

Question what is the radius of tgis router/ repeater? What is the distance i mean. Ive been needing to set up a repeater outside the house

[@ronan1me]

if your router is not in ddwrt can we still do the wireless repeater? my doesnt have the option for wireless repeater option in its setting

[@uphill248]

What’s the difference between access point and repeater? I’m just trying to get Wi-Fi on my old modem without ethernet cable.

[@torogipro]

Repeater does not need cable to rebroadcast the wifi signal.

[@uphill248]

Thanks for the reply. It seems like all these videos are for routers only? Does this works for Modem the same way? Also using a repeater does that bring down the Signal or the speed of the internet?

[@233178033]

I have the E2000, I downloaded the dd-wrt. When I downloaded the top file like you did & tried to install it at the end it said download failed, so I downloaded Factory flash 7,25MB & installed it. As soon as I save to DHCP Forwarder & put my main IP address in, it says your connection was interrupted. The only way I can get back into my router is to reset the router back to dd-wrt. What is the difference between repeater & repeater/bridge Please help

[@carviryzen288]

My router doesn't appear in ddwrt, any suggestions on what to do?

[@buckseyboy]

I have a burning question can I connect my ps5 to the router that’s in repeater with a Ethernet cable to have wired ps5 connection??

[@Obenfiquista81]

I can't make make old TP-Links routers wortk as repeaters or acess points. I did everything right, but it just won't sent the iternet on the wifi.

[@theseogeek]

hmmm, i don get the repeater bridge option in the drop down menu

[@QTechman]

thank you man i like you video you explain very good😀👍

[@shobanbabu124]

How to revert back to orginal firmware? I want to connect one router and another AP without cable so Is it possible to connect wirelessly(without using lan cable)?

[@dranrebgarcia6471]

Hi Torogi Pro, I upgrade my router. My new router is now working and its better that the old one. But the problem is, my old router has a “phone” port where our landline was connected and the port is the small one, I think its RJ 11 and not an ethernet cable. And I still want to use our landline because we are still paying subscription and my mom and dad are still calling on that landline. My new router does not have that “phone 1”, “phone 2” ports at the back. It only has the 4 ethernet port and the WAN or Internet Port where the modem of internet service provider and that’s is. I want to use the old router as and extender/repeater and also to connect the phone landline. My question is, will the landline still work when I hook up the landline to the “phone” port of the old router after I configure it as an extender/repeater? By the way, our internet was previously a DSL when that router with “phone” port was bought. And the subscription includes phone landline that’s why the router has phone port. And then we upgrade to fibre optic without upgrading the router. The phone line still works. I tried to configure the old router to use as repeater and also hook the landline but no access. It would be very much appreciated if you could please teach me what to do. Thanks.

[@IThinkICare]

Just to be clear, because there are many "terminologies" . Your extender has a "media adapter" feature. The difference between that and the repeater is that the repeater is wifi only. (full discloser, I didn't watch the rest of the video) so with regular routers, can't go line - wifi - wifi - line. Correct?

[@jeffroberts2845]

Worked like a charm. What is the App that you use to test it with?

[@hernandezcarding6]

Hi Torogi! I have a router HG659 which can connect a maximum 15 wifi devices. My question... If I connect a wifi extender or repeater will it increase the number of wifi devices that can connect to my wifi network? Hoping for your advice.

[@youtubebrowser1730]

hi i connected two routers but the repeater is not connecting to internet with another router

[@paulojmgama5477]

HI how would I do this wirelessly using a Huawei B612 as the main and a Huawei B315s as the wireless range extender? Please help

[@chartfix]

i hv upgraded to vdsl fm adsl.. the wifi range on vdsl router in not adequate. Can i use my old adsl router as access point asper abv instructions?

[@endicot1949]

Setup old Linksys wrt54g router w/ddwrt firmware. Can connect via ethernet, but no wireless detected. Status says radio on, no packet loss, and 88% signal strength. Any suggestions on the wireless problem?

[@rafaelruiz8194]

Hi could you possibly make a video on how to set up ddwrt as repeater bridge and all the other functions like client bridge client etc. and show that the internet is actually working? At the end of the video it didn’t show the internet Thank you

[@1miltond]

Sr you are good thank you for you time and video

[@eescalante68]

Can I setup my old Verizon food -G1100 as a repeater? I can’t find a firmware update on SD-wrt. Can you help me please. Thank you

[@IVFRegulation]

Can I link two routers directly to my ADSL line? The two routers' signal can't interfere with each other because of the vast distance between them.

[@ujjawalkumar9819]

Thanks a lot bro..... We need you most....

[@vgopalt4922]

Good Video👋connect another router to main router wirelessly👋 But ISP will provide their own branded routers. In My case: Jio Fiber ISP router and D-Link (DIR-816 Dual Band) as repeater connected wirelessly fine but when power fails (no UPS) @ My Jio Fiber router side, when it's restart, all my configuration gone. Again I need to reconfigure all the time when power fails @ ISP side. Where as power fails at D-Link side nothing will happen and automatically connecting. Any solution for Power failure @ ISP router side (no UPS) Let me know any solution (Please Don't say UPS at main Jio router) if your main router switch OFF/ON, will it reconnect automatically?🤝

[@ilhyanfernando6101]

i did exactly what you did with the e2000 because i have the same one but firmware upgrade failed. did i just brick my router?

[@HowTwo007]

So i have my main wifi router on the main floor which cannot be moved. On my upper floor i have a surveillance system that can only be connected to the internet via ethernet cable. So what i need to know is how do i get my surveilance system connected to the internet. I cannot run an ethernet cable from upstairs to down stairs so i cannot connect the surveilance system directly to the router or connect 2 routers together with ethernet. Is it possible to place another router next to the surveillance system and link the 2 routers wirelessly. And then connect the surveilance system to it. And if so can all routers do this Or will i have to get those wifi booster things with ethernet ports on them. All help is appreciated

[@torogipro]

Yes its possible.

[@ryanprice2930]

watch the vid i linked to you here its the same person explaining exactly what you need

[@cousin974]

Hi mate 👋👋, Thx for the video. Question please pertaining to your first option : do you need to connect permanently the second router via a cable to your main router or is it wireless as well between main router and the repeater bcoz I want to install the repeater in another part of my house... Thx in advance. Cheers

[@gezaerdelyi4476]

do u have experience with TL-WR741ND ? its a very old router i want to make it as a repeater

[@mo_nzo]

Hey bro. I have a Castlenet router & I can't see any link concerning the firmware on its gateway page. Please help.

[@amogh894]

Hey man! I checked for my old router (TPLink WR940N) and it showed various revisions for it, which one should I use? Because the latest revision doesn't support while the one before that does

[@mrsmit216]

My router does not have the option of repeater mode model no is tp link WR850N what should I do please suggest!

[@regiemagallanes4841]

my old router is Globe GAN4PT is there a way that i can also make this one as a wifi repeater without LAN?

[@mohsinrauma]

My netis wf2411 router support repeter function but whenever I used as a repeter the fi network shows no internet pls help me after a reset it's work once but after that sem problem

[@amevangelistapaf27]

Hi can you make a tutorial about making the old pldt fibr router

[@chrisdupuis731]

I have a linksys EA8300 and I want to connect an second router to the network in a different part of my house. Do they need to be connect via ethernet cable or can I connect them wirelessly. I cant run a cable to where I want to put this router. Any help you could give me would be appreciated.

[@train4905]

thankyou so much indeed sir.this has helped me loads,a superb video sir .

[@gerrysotto9688]

im looking for this tutorial, well explained!!! may i ask what is the fast ethernet cable, i need to change my cable.

[@torogipro]

Cat5e or cat6 would be good amigo.

[@Lmaooooo54]

@@torogipro when i enter my ip adress it says admin is the wrong password

[@chengsaeteurn5454]

@@Lmaooooo54 put password for password and admin as username

[@Lmaooooo54]

@@chengsaeteurn5454 thanks

[@jujumagic8]

When I try to find the ip for my secondary router there isn’t one, I did the same thing you did but the default gateway is blank

[@rahuldobhal9152]

Same here

[@dennielyn]

Same here.

[@OnionReels]

Perhaps you should try running ipconfig in a the command prompt. In your search bar, type cmd, click to run it. Then type ipconfig, press the Enter key. Check the Ip displayed

[@thenontekis9302]

There is WDS option in my modem.But no scan or survey button is there....instead there shows MAC ADDRESS colomun

[@padmeshjain1736]

Hey i have DSL 2370U router so how can I make that router as repeater ?