Connect 2 Router without Cable (TP-LINK TL-WR841ND) | NETVN

[@BTH82]

Show ALL Wi-Fi password with only 1 CMD kzbin.info/www/bejne/iHSUeIGFqsRnj7c

[@JamilKhan-tc9ff]

How we connect with wire tl 841n tp link this router ... i have connected with wire but sometime it doesn't work .. when i restart than again working .. work somtime for 1 hour than automatically stop work and do not access the ip admin page .. plz guide me and give me solid solution plz

[@keshavdwivedy5720]

This is the only video that worked for me! He has simplified everything perfectly and I really could understand him! Great job @Net VN!

[@pierrevalentine2430]

at first it didnt work for me because i've change the channel same in your tutorial, after many tries the wds worked... I didnt change the channel configuration.. thank you for this tutorial Sir kudos!

[@magma80]

Channel is shown when you scan.

[@k-popaddict2666]

Confirm: It works! Wishing your channel all the best! Thank you.

[@azharsobuj]

আপনাকে অনেক ধন্যবাদ, আমি অনেক ভিডিও দেখেছি কিন্তু, কোনভাবে আমার সেকেন্ড রাউটার কানেক্ট করতে পারছিলাম না। আপনার ভিডিওটা দেখে অবশেষে কানেক্ট করতে পারলাম,, অনেক সুন্দর একটা ভিডিও অনেক সুন্দর ভাবে বুঝাতে পেরেছেন। আশা করি আপনি ভবিষ্যতে আরো সুন্দর সুন্দর ভিডিও দিবেন আমাদেরকে। আবার আপনাদেরকে থ্যাংকস।।

[@edwincyy]

Thank you very much! I extend my wireless from Airport Express(Main router) to TP-Link(extender) successfully. If your main router is Apple Airport Express/ Extreme/ Time Capsule, just set your extender router LAN IP address as 10.0.1.xxx :)

[@wh2681]

Does your internetspeed decrease?

[@udayry]

Thank you for the video. I understand the time and efforts required to make such a video tutorial but then again, one should exercise utmost caution as many novices might follow the steps mentioned to the letter and would not be knowing anything else about private IP addresses, how to set IP addresses of their LAN/Wifi adapters etc. making them struck. The most important steps are left out such as how to connect to the range extender after changing its IP address and also disabling DHCP. I found the music to be quite distracting, but might be suitable for others.

[@ramkrishnas]

Thanks for sharing Video with simple steps. With the help of your video i managed to user my old router as Range extender.

[@yna6353]

Yey, finally our old router has a purpose now!🤩 No more dead spot at home.😊 Thank you so much for the easy tutorial! 🤗❤👏

[@TechRoady]

your number 1 bro try for this very long time finally i got your video and now its successful. thanks your greate

[@iannalemme]

Thank you, all went perfect but only after initially resetting the repeater router and the following all steps. My main router has the ip 192.168.100.1 and i set-up the tp link repeater as 192.168.100.156 and it works wonders.

[@tirthankarbachhar]

Same i did, and worked. But i cant login to the repeater config anymore. Help me.

[@madan6466]

@@tirthankarbachhar Same issue, any update bro

[@BigMackWitSauce]

@@tirthankarbachhar Did you ever figure out what the problem was?

[@okosember]

same question here... @@BigMackWitSauce

[@thehellsangel1]

Very nicely explained steps. The video would be more clear if it also explained that the step 3 of changing IP is to bring the devices into same network. And in step 4, the default gateway should be the IP of the primary router. But, never mind, its a Great video..and thanks a lot for the effort NET VN.

[@NETVN82]

Thanks

[@added021502]

@@NETVN82 , can you add this very important info in your description? I think a lot of your viewers got lost in step 3 and step 4. Sad thing is if you didn't get step 4, you cannot access the Web Interface.

[@noobdzgamer1397]

​@@added021502i can't open the page again after disabling DHCP

[@saneline8304]

Thank you.. I did it.. 😊 Hahaha Actually I have plan to buy a wifi extender, I am just browsing how to install it when I get into your video, I looked for my old tp link router and try to do following your video step by step but I failed. 😊 I don't give up. LOL. 😊 And to my surprise.. I did it..yehey! Imagine. I save money for watching your video.. Thank you Stya safe and Godbless. 😊

[@Rudresh_1812]

Thanks bro, i saw many tutorials but this was the one for me

[@marisa2364]

Wonderful video! Short, ad-free video. I didn't understand much but I did all the instructions and everything works perfectly!

[@lucassouto5786]

Man, you’re the best Greetings from Brazil

[@lucassouto5786]

@Arturo Wayne I don’t have a girlfriend and even if I had one I wouldn’t hack her account, that’s stupid

[@FitBeastMr]

Thanks very much .. problem solved Tried many times .. seeing many videos .... final with ur video problem solved ......DWS we should give main router pws ...i got it now

[@blessingoflife3814]

what a complete and perfect video u have made. i salute as i seen many video but they cant tell each and every thing but u did. Thanks.

[@dkinsight27]

Thanks alot because of ur tutorial i set up again my router

[@wongndesochannel2710]

Tq gan akhirnya berhasil juga,setelah di ulang² vidionya😂🤣 good job gan🙏😅👍👍👍

[@ngikngokgaming5780]

thank for your tutorial in this video, my Tplink work using this tutorial brow

[@magma80]

TP-Link should hire you.

[@gameratortylerstein5636]

I’m just gonna buy 50 of these and bridge them over and over from Walmart to my house. And I’ll power them off solar panels.

[@mohsin9233]

Lol

[@starboy001]

Holy awesome!!!!! 😂😂😁

[@mineblox3671]

🤣🤣🤣🤣🤣🤣🤣

[@smhontor]

Thank you very much brother! I am trying this since couple of year's, and finally the day cones to me alhamdulillah ❤️ finally i am able to connect my 2 wifi router together without any ware. Thanks for your valuable tuitorial. Hope it will work for all 🎉

[@pbassant]

Le seul tuto qui fonctionne réellement 🎉

[@munylou7654]

that music is sooo dope

[@ВладимирБон-й5я]

Спасибо, очень подробно, ничего лишнего. Добавил второй роутер за 15 минут, инструкция работает!

[@EuniceMarieAmor-cs9hr]

I dont have internet connection but i completed this video tutorial

[@tonirco]

Bravissimo ho seguito passo passo e sono riuscito.... Un mio amico tecnico informatico mi ha detto che era difficile, con i tuoi consigli tutto semplice 👍👍🤣🤣🤣

[@matteobrugnotto1408]

Ma dopo aver fatto tutto... il secondo modem...posso attaccarlo con solo l'alimentazione in qualsiasi zona o deve esser attaccato un Ethernet al modem primario

[@comedykatta3760]

Its really working... Thanks broo...

[@sujoychowdhury9689]

This video has been very helpful to me. I have benefited a lot. Thank you very much. Good luck with my ♥♥♥♥

[@NETVN82]

Glad it helped!

[@sheikhnazmul3008]

Thank you bro Love from Bangladesh

[@enricocragnolini717]

Works for me. Thanks for video. Just a question.. I can't acces to the roter interface any more. I repeat 2 times, second time after resetting roter. Could you help?

[@kayanmody3873]

same for me... got a fix?

[@delight8262]

The same here

[@MarcoStettlerCH]

@@delight8262 same problem

[@yassinehani]

you didnt change the lan ip

[@joejosh1662]

same..

[@ishaanangal3281]

Heartly Thanks ....it worked..👍💯💯

[@rocketracoon2337]

2020 nyoba masih work, thanks

[@udarasamanpriya]

It worked.. Thank you very much ...🎉❤🎉

[@adrianm.stoica1440]

Working!Thank you!

[@NETVN82]

You're welcome!

[@funongoogle]

In the video the DHCP is off, so we need to manually configure the IP in each of the devices. I am able to connect to the Wifi of the new device using this, but unable to connect to the internet. Can you let me know what I may be missing ?

[@ganiul9629]

The ip address is not in same subnet with lan ip addrs . Error mssg

[@danskills9]

I'm having similar results too.

[@salvatore3018]

Grazie...Funzionale e connesso...Grazie.

[@ImtiazAhmed-qo4kd]

Worked perfectly 😊

[@NETVN82]

Great!

[@shawaizakhter9939]

Thanx. It works👍

[@RiviAlbani]

Video yg bagus dan bermanfaat👍👍👍👍

[@primozkumar3909]

must be very close to the main router when i setup or it doesn t matter? tnx for help😉

[@barickfoster]

You are the best , i have been watching bullshit until i found this , thanks

[@TheBluesAlfa]

This video is useful.Thank you very much.

[@sandeepvalapi3731]

Worked well. Thanks so much

[@aco1612]

Thanks brother,you help me!

[@zax3726]

Thank you for helping me :D

[@NETVN82]

Thanks

[@prasadkatle9284]

Thanks Brother Loved It ♥️

[@lovewithcalligraphy7291]

Thanks Bro. Its working

[@munifzaman136]

It worked. Thank you so much.

[@technologyaddicter3407]

Thank you so much... 😊😊😊

[@abhishekgubhaju8604]

Thank you for your precious video

[@Cristian89Adrian]

So I did all the steps correctly, did same thing over and over 3 times, after i reset and start from the beginning, No internet, same router same process, what could it be ??? ( I configured the router via ethernet cable, once i setup everything and its RUN i disconnected the cable and connected to the router WiFi and still no internet .. )

[@zhamarabautisa6893]

u must disable the dhcp server

[@Cristian89Adrian]

@@zhamarabautisa6893 i gave up actually, but thanks, might try again, but did disable dhcp server....

[@racherlasanthosh6518]

@@Cristian89Adrian connect one cable from your main router to secondary router say port 2 ( Lan Port ) and connect another cable from port 3 of secondary router to PC and try setting the same.

[@Cristian89Adrian]

@@racherlasanthosh6518 thanks will try and let u know..

[@kwasong567]

Thank you so much mate

[@stylishqurban5388]

thanks bro very useful video

[@ikramikram4567]

So thanx brother My router is being wifi i without any wire, such a way handle it like so brother

[@arestate2023]

Can we use this setting to connect our router to mobile hotspot to extend wifi range

[@manikchandro9850]

Love you brother❤😘Thank you so much....very helpfull video....thank you

[@NETVN82]

So nice of you

[@gideonmwangi148]

very useful!!! thanks.

[@nicuvaduva8777]

work ,nice joob thanks

[@sheikhnazmul3008]

100% working

[@pareshkhismatrao5591]

Thank you so kuch for the tutorial

[@zawadchowdhury]

hey brother, hope you are safe and healthly. i wanted to extend the wifi range of home,bascialy to blanket everycorner of my place. i have 2 tplink routers: the main router (WR841HP) and the old router (WR740N),i tried to bridge the routers wirelessly but i failed let me knw if there is any way to do it. Thanks in advance.

[@dabu173]

Brother, But one query i faced that is ... when my primary router restart or after switched off when swtiched on then my Extender Router wont get connects automatically ..i need to reconfigured it every time. Soo any solution for that.. awaiting for your Quick Response.

[@MGK93]

Same problem here, it stuck on obtaining ip adress! Did you find any solution for this?

[@nishmithrai7640]

Set wifi channel from your parent router to 11 from auto

[@vullnetduraku8040]

Thank you very much

[@danskills9]

I tried all these but I don't seem to understand why my own case is different. Once I disable the DHCP server in the secondary router I just can't log in to the assigned IP address and neither will it have an internet connection from the primary router! I'm using two Huawei routers (B535-956 as primary while B315-608 as secondary).

[@JeffreySoltan]

Brother I'm using huawei router too. Did u find something to solve?

[@KumagaiVideojuegos]

Gracias, me sirvió

[@Cristian89Adrian]

Hi, i did all those steps, it shows WDS Status: Run, DHCP Disabled... and still no freaking internet !? pls help.. i got the TP Link TL-wr841N, it should work !

[@plecostamus1919]

Even I’m facing the same problem....after turning dhcp off when router restarts im unable to connect 192.168.1.254

[@paolo0425]

Try changing the WDS type from Auto to WDS1 or WDS 2.

[@claudiovip98v50]

Thank you very much worked

[@LoweHenry]

thanks a lot, successful installation. with the subtitles, it was very easy to understand.

[@azharfabric5181]

Thanks

[@NETVN82]

Welcome

[@shawnahmed8946]

Thank you very much

[@octagon2760]

Is it necessary that both router should be of tenda ??? Plz reply

[@cnx_1441]

love u i did it :) ur the best

[@akshaydesai6805]

Watch the video at 2x. Thank me later

[@chrissdevano]

Akshay Dessai i’ll just thank you right now if you don’t mind

[@easywebsolution7044]

it works, Thanks

[@vivekreddy9650]

My router shows WDS status as "init.." . Help pls

[@bosstronix4970]

disable 5.8g

[@sualehakausar8454]

@@bosstronix4970 how to do that?

[@danielc9916]

For me it worked by leaving DHCP enabeld

[@DesignReady.]

Keep channel on auto it worked for me by that

[@t.adityapatra8597]

It's not working...any suggestion plz

[@JhonatanJaramilloOrtiz]

Update: check WDS type.

[@aghalitoghrul3568]

Good bless u man Thanks

[@BrianBurgos92]

So if i understand will have to wifi connections? One with the name of the main router and the other with the name of the second, right? It is possible just have one wifi in 2 different routers? Cuze everytime someone came home i have to give 2 wifis and 2 pass Or am i doing bad?

[@NETVN82]

yes , 2 wifis and 2 pass

[@NETVN82]

If you don't want to do so, set the same wifi network name and the same wifi password

[@BrianBurgos92]

@@NETVN82 thanks man!

[@NETVN82]

Yes

[@nattaponpanurak3978]

ขอบคุณมากๆครับ

[@maoanz]

Thanks a lot.

[@11.59edits__]

I saw your video connecting 2 routers wirelessly and we only connected, now I have to reset the second router but the question is that the WAN which is the first router will not be reset, please reply.

[@cuanok3254]

Thx Bro , worth iT .... thx so much

[@JamilKhan-tc9ff]

when u disable DHCP option if main modem off than router doesn't connect to mobile ... wht will be the solution sir ???

[@MRizwan-wy4nr]

grt , THank u so much solved my problem

[@anderyuk5339]

Thank you for straight. Can attach a third router to the second, the same way?

[@NETVN82]

Yes, but the speed will be slow

[@anderyuk5339]

@@NETVN82 I found another solution. Anyway, good video. Thanks Net VN 😉

[@duminicad]

Ander Yuk what’s the solution you found?

[@ShankhoChakrabortyy1]

Thanks a lot buddy, thanks a lot...👍👍👍✌️

[@rashelaj7607]

You have to fix a channel numer like 1 to 10 . Any number both of your router. Example : 1. Change your main router channel from auto to 1. 2. Change the channel of 2nd router also 1. *please change the main router cannel from auto. Because in auto mode it frequently changes its channel when it lost power. For this reason the secondary router can not connot connect to the main router because of different channel number. Thank you.

[@mhasan9831]

Thanks and Great.

[@TeamJemo]

thank you i got it right

[@maftuhshoim9235]

If it's already named with one SSID, and already linked with main router, can we renamed same with the main router? Thanks

[@BoLLoo18]

THX BRO

[@bedrudinshekur]

Wonderful!

[@maftuhshoim9235]

Thank you for the tutorial, it's help me to setup my used router.

[@saeeduchiha5537]

I do this approach for a while now with one issue : I have to turn off the repeater router every few hours to regain internet access again!

[@leeanneleimatira9793]

is this work if my main router is converge and my 2nd router is tp link t-lwr840n? thank u

[@marisa2364]

Just a question: Is it possible to see devices connected to a local network without connecting to the network (= remotely)?

[@jihannareed5337]

i dont have computer or laptop.is it ok to use mobile phone to configure this?