Connect PLMS Nissan Consult Interface to Android Stereo or Phone using Nissan Data Scan 1 NDS1

Connect PLMS Nissan Consult Interface to Android Stereo or Phone using Nissan Data Scan 1 NDS1
Nissan Data Scan App: play.google.co...
Android Stereo GA2168K: www.amazon.com...
Consult Cable: conceptzperfor...

[@SINANNN47]

This is a big coincidence. For the passed couple of days I've been trying to figure out why this wasn't working. And then I saw this video come up on a 300zx z32 Facebook page. Thanks for the Video, I will try this out tomorrow and see if it works!

[@mazdamitze]

Did it work? OBD1 port with cable that is

[@SINANNN47]

michel gubel yes worked perfectly

[@dannzx]

great video very helpful I hope to do this soon so a good guide to follow and think yours is the first Z I've seen with a full tank of fuel! 😀👍

[@Fergas.]

[RUS] Спасибо, помог настроить подключение "Планшет-Адаптер" (не знал VID & PID). [ENG] Thanks, helped set up the connection "Tablet-Adapter" (did not know VID & PID).

[@Ed.Incierto]

Good day! I was just wondering, what unit of measurement does the injectors, air flow meter and throttle position represent? Are they in voltage? Thank you so much!

[@mcdoinks]

I just did this for my Z and my VID and PID were the same. VID 0403 PID c7d9

[@DG-lf3kw]

Resize gauges using "pinch to zoom" but it's glitchy .. took me ages to line up, and size my gauges.

[@РоманШайкин-л1л]

Спасибо тебе мужик, помог разобраться!

[@Mr.Max79]

На какую машину подключал?

[@steventriplow5378]

Is there a similar option for later models? I have consult v2 with obd2 connector

[@lickatonge1945]

Where did you get the interface?

[@mimo951]

From where did you get it. All what i found in z1 or czp works with windows I couldn’t found same things work with android

[@semilegitmekanics2452]

How do i get the NDSI app to show up in my android auto screen? I installed it on my phone, connected photo to android headunit, bit the app doesnt show up?

[@RoySki007]

I see you got torque app there. Have you figured out how to use it instead of NDS1?

[@f22gtr]

Torque App for OBD2 cars only. It came pre-installed

[@Thrilla_of_Manila]

I can't figure out how to resize the gauges on the "Dash" tab. When I try to 2-finger pinch to resize, the app thinks I'm trying to swipe to the tab left or right of the "Dash" tab. Any help?

[@raymundolugo9279]

So this cable stays connected all the time right? And any Android OBD Supported unit would work? Thanks!!

[@f22gtr]

Correct. I have mine connected all the time so I can monitor sensors while driving

[@genelinder7552]

Hey what are those red speakerss

[@steveriedel6931]

Did you get with or without the datascan?

[@randymack2]

Awesome vid, thanks. Can you tell me how to add a gauge to the dash? I accidentally deleted one and can't add it back. There's only trashcans. No add button

[@f22gtr]

Try press an hold somewhere on the background to see if an option comes up to add gauge.

[@adamsworld6334]

Thanks for this worked perfectly, cheers

[@raymundolugo9279]

Can this cable and app be used with a different head unit stereo? (Android) that unit you used is not for sale anymore.

[@f22gtr]

Yes as long as it is Android and support us input.

[@juliusbrianalmodovar9351]

Why my usb device info app cant read/recognize the consult? Please help

[@lewiswhitfield4362]

do you know what android version this headunit is running? my mates s22 with android 11 would not install the app, my old android 6 phone from 2014 runs it but its laggy as

[@Weenie_Whistle]

Are you still having problems? Had this exact problem when trying to install everything on my radio, found the APK's of both apps (NDSI and USB info app. The only NDSI app i could find that would work is a Lite version though so there are ads and you dont have full access to everything sadly) and now have them on my phone and radio, I can share the files with you just let me know.

[@lewiswhitfield4362]

@@Weenie_Whistle hey mate I got mine running on an android 10 headunit, I installed it via USB and loaded the APK that way

[@Weenie_Whistle]

@Lewis Whitfield nice yeah that's exactly how I had to make it work for me, atleast you got it fixed though 👍

[@Weenie_Whistle]

@@lewiswhitfield4362 actually question what version of NDSI do you have and is it the lite version of full?

[@lewiswhitfield4362]

@@Weenie_Whistle full version

[@briemosborne7017]

Will this work on a Nissan d 21 1991?

[@dherektravelvlog2750]

interesting video thank you so much ill try to my car thanks bro

[@ninjaprime3655]

Noob question but I don’t own Android anything. How did you load the apps to the head unit? Do you have to have an android phone to do it?

[@f22gtr]

@Ninja Prime. This stereo comes preloaded with Android operating system. These are called Android stereos

[@mehmetkara6763]

@@f22gtr How is there a discount link?

[@f22gtr]

@@mehmetkara6763 I don't sell these. I just made video of how to connect.

[@giovannizapata1207]

Would this work on a 7 inch pioneer deck....

[@f22gtr]

@Giovanni Zapata: not unless its Android and supports downloading Google app NDS1.

[@JOSUELOPEZ-bp9mv]

What stereo is that?

[@f22gtr]

Eonon 10.1" available on Amazon

[@Jay.3]

Mines still wont connect says my product number is 0000 tho i think thats it im not sure

[@myloalex]

Great job! Thanks

[@Nojalaese]

Does this work on a JDM ecu?

[@f22gtr]

@Alexis: It should as it plugs right in to the OBD port but I never tested on JDM ecu. It should work on chipped ecu for sure as mine has Nistune on it.

[@DG-lf3kw]

It works fine on my JDM ecu.

[@JoseGomez-uc1tw]

Could you post a link for your head unit or the name of it

[@JoseGomez-uc1tw]

Nvm just noticed the link 😅

[@f22gtr]

They have a new model out. Search for GA2187 eonon. It now comes with free dash cam, rear cam and obd2 sensor. Google offline maps also work. Its great stereo for the money. Maps are slow to load sometime but once loaded work great.

[@Taloj123]

My phone keeps asking me to connect to bluetooth when i try to connect

[@domsta2008]

My Android is asking for a Bluetooth connection. Samsung s20

[@ratgreen]

You need a usb OTG adapter + the consult adapter in this video

[@ExotizzTV]

nice 300zx

[@myloalex]

Great video! Thank you!

[@mike109374]

How the hell did you put the rear panel on before the headunit

[@f22gtr]

@Mike Leyva. This is a double din stereo with removable screen. So install the stereo first then slide the screen on the hinge.

[@MrDoozie21]

This is pretty sweet

[@DavidWHitchenson]

Fake program does nothing just pretty picturs and false data.

[@DavidWHitchenson]

Fake program does nothing just pretty picturs and false data.

[@genelinder7552]

Hey it works if you want to pm me i happly show it working and hive you a live run through my was uf a little diffrent but it works

[@MrSirGiuseppe]

Lmao definitely not a fake program 😂