remove speakers and door panel toyota camry 2018 and up

plastic panel removal tool amzn.to/32K8XF9
door speaker adapters and wiring harness tacotunes.com/...
removal of pressure fitted clips amzn.to/2RKvLOO
PAC speaker popper amzn.to/3hQaOwu
acoustic speaker checker amzn.to/2El14gc

[@ogxsnoopi3156]

You should add this to the Toyota playlist 👍

[@scottnunya2441]

The speaker adapter in the link 82-8146 for the fronts doesn't seem to fit a 2019 Camry Hybrid LE. Some research shows it is good for Camry's 2002-2011 front only. The only adapter I could find are for the backs and it is 82-8148. For that front adapter, no matter how I configured it, the holes would not line up to the door holes. Some further research shows I'll likely have to modify the linked adapter for the fronts to make it fit.

[@AlejandroSanchez-hs3fu]

Camry speakers are not so bad I think they do a great job. But good video for replacement

[@darrylpolite8722]

This video is super helpful. How do you remove the fixed backseat on a TRD to add a sub in the rear panel?

[@optimalorlando]

Excellent how to

[@sindelm7437]

The harness for the front doors from Crutchfield has my positive from the after market speaker connecting to the negative (pink). What do I do?

[@CesarO746]

Great video men, question any idea for the 2024 Camry XSE, i've been looking and seems to be very hard to find the adapters for the speakers and tweeters, and mine its a JBL system.👍

[@connectedcaraudio]

Did you already try Metra electronics ?

[@connectedcaraudio]

I loooked at Metra, dosenet look like they have anything yet Although many times the old adapter in the same generation may work for the 2024 but it won’t show in the website because they haven’t verified it yet

[@turner9015]

Is there colors for the rear deck speakers?

[@flexglue3136]

hello, found your video very helpful, thank you for making this. im still confused though, in the video you stated the front door speaker size was 6.5 but nothing on the rear size. i have a 2021 camry se and your help would be great, thank you

[@andrzejbudzynski9237]

Did u figure out about rear speakers?

[@flexglue3136]

@@andrzejbudzynski9237 nope

[@alexmoon7049]

They’re 6x9 I believe. I went on Crutchfield and bought the harness for the speakers it suggests for you. Keep in mind the rear speakers are shallow mounts since it has less space. I just did mine with JBL Club 620F. Fit nicely and easily, just need to splice the wires to the speaker.

[@andrzejbudzynski9237]

@@alexmoon7049 no. Rear are 6.5.

[@alexmoon7049]

@@andrzejbudzynski9237 thanks for the correction

[@GlaciusDreams]

I just got a 2022 camry SE hybrid. It has some sort of upgrade to the infotainment screen and it seems to be capable of getting quite loud. The stock speakers aren’t cutting it I don’t think. Any suggestions on what to replace the speakers with? Im incredibly ignorant with car audio but I can def swap these puppies out pretty easy it seems.

[@syltonn]

im am currently buying a skar audio for my 2022 trd which is basically an SE, I will let you knowif theyre good or not

[@K1LoFoX]

@@syltonn how were those skar speakers?

[@raulcuriel1173]

Can you use a wire harness adapter on the back door speakers on the 2018 Camry SE or just splice only that’s what crutchfield told me I had to splice not use a harness please help thank you

[@alexmoon7049]

No wire harness adapter for the rear doors. At least not for the XSE model. Had to splice some wires, it’s easy as hell with Crutchfield’s instructions

[@ShoXruxTJ]

Are you installing / making youtube video watching a youtube video? 👀 jist curious

[@TJsVette]

I think when i am ready i am going to upgrade the entire system. Going to run new wiring and new speakers to a new head unit. I added subs to my stock setup but the subs dont hit hard at all. If i run new wiring i can add a extra amp for the speakers.

[@Wavefront101]

Make sure you use a line out converter with the stock head unit, which can offset the toyota filtering for the sub. Also you want to tap the front speakers for a full signal.

[@TJsVette]

I went ahead and installed a brand new head unit, 6x9 speakers in the front doors and 6.5 speakers in the rear doors and the 3 1/2s in the dash. Ran it all to a kicker 4 channel amp. Sounds amazing with the 12s in the rear. I had a lc2i hooked up before to the old factory head unit.

[@Wavefront101]

@@TJsVette Sound like a nice system. I installed a nice fitted sub, but am hesitating to replace the headunit, I need to find a interface that can retain the birds eye view, along with steering wheel control, I have seen 1, but it doesn't show any real world images of it installed, so I am skeptical that it will work, and can be calibrated.

[@TJsVette]

If you want I'll make a video on my setup for the Head unit. It has the steering wheel controls and backup camera. I got everything off amazon.

[@samguerrero1972]

This might be a silly question but what's the white plastic piece?

[@s1ncere16]

Bass blocker so the tweeter doesn’t blow.

[@yucaipawarrior]

They put a resistor in the line that reduces the energy of the more powerful bass/mid frequencies that will damage the speaker. In the camry, they also use the tweeter adapter as the summing point for the tweeter and door signals.

[@OfficialCPProduction]

Where are the speaker adapters? Also, have you done a Camry with the JBL upgrade?

[@Aliszmas]

So both doors have same size front and rear ? Can you please add link of speakers and the adapters I’m willing to upgrade my speakers too

[@urielhernandez3286]

The front is a 6x9 and the rear are 6.5 but Toyota used a 6 3/4 inch speaker for the front

[@OfficialCPProduction]

Keeps saying, " I will leave link in description below." Looks down on description, realizes he never shared any links. hahaha

[@connectedcaraudio]

Finally got the links. Having kids during corona virus will keep you busy

[@RelentlessLegacy2020]

do your a speaker wiring diagram for 2020 toyota Corolla se. I'm trying to install loc and remote turn on

[@TruongNguyen-hq6ed]

Thank you!

[@connectedcaraudio]

back speakers are also 6 1/2

[@yoannavrillier2826]

Hi Great vidéo, also if you would have an explanation somewhere to remove the (JBL) subwoofer on a back that would be nice. Thank you very much

[@connectedcaraudio]

Sorry I couldn’t get that video the system I had was non jbl it was the base model. If you can leave a message on how to do it for the other viewers or leave a link to a video on where you found it that would be helpful also

[@yoannavrillier2826]

@@connectedcaraudio Ok great thank you very much for replying

[@andradeuclides]

Hey @@yoannavrillier2826, did you ever find how to remove the grill of the JBL subwoofer? I can’t find the info anywhere, and I really don’t want to break it trying haha. I would appreciate it a lot man, thanks.

[@123alex456moon]

@@andradeuclides it is a part of the rear deck. I don’t think you can remove just the grill by itself

[@andradeuclides]

@@123alex456moon thanks, I took the car to the dealer, and they did the work in the end.

[@samarjitsingh4430]

How about Polk audio db691 6x9 in the fronts?

[@boodah808]

Can you drop the sizes of all the speakers front and back

[@garickmapson6203]

Do you need speaker mounting bracket for front door speakers?

[@yucaipawarrior]

You should always have a mounting adapter for mids to decouple the speaker from the door. Otherwise the acoustic energy of the speaker is stolen by the vibrating of the door and decreases your volume.

[@renat021]

İ need learn 2018 camry subwoofer inch?

[@blaketwin1977]

that's the wrong harness for the doors on my 2018 camry xse.

[@200103511]

Please fix your audio. It’s so quiet but ads are so loud. Why not have the guy doing the work narrating, it would be far more natural and pleasant to watch

[@fordwindsor351]

If you buy the actual speakers for your car you don't need to buy any adapters!

[@wolffredd2664]

People aren’t doing this to replace they’re doing it to upgrade.

[@fordwindsor351]

@@wolffredd2664 Even upgrading, buying the proper speakers you don't need adapters!