Connecting a 2.2kW AC Motor with VFD Sako SKI780

[@pacosanchez7454]

Great video man. I highly appreciate it since I was looking for the programming setup for my new Chinese VFD!

[@GBWM_CNC]

Im glad it helped

[@yak-machining]

Hallo, ich habe meinen auch angeschlossen und einen externen Potentiometer installiert, nur ist es normal das die Frequenz andauernd hoch und runter springt und keine konstante Frequenz anzeigt

[@GBWM_CNC]

Wie groß sind die Schwankungen?

[@yak-machining]

@@GBWM_CNC meistens um +- 0,5 hertz

[@GBWM_CNC]

@@yak-machining Ich werde sehen, welcher Fehler bei mir ist und dich wissen lassen

[@yak-machining]

@@GBWM_CNC jo danke dir 👍🏼

[@GBWM_CNC]

@@yak-machining Ich habe gestern nachgeschaut und habe das gleiche. Schwankungen +/- 0,5Hz

[@BMCChileSpA]

Muchas gracias por tu video muy instructivo, a modo de consulta el manual sabes donde encontrarlo, ya que me conseguí el vdf pero sin manual, desde ya agradezco tu ayuda.

[@GBWM_CNC]

sakoinverter.com/wp-content/uploads/2024/05/SKI780-user-manual.pdf

[@BMCChileSpA]

Excelente amigo, bendiciones

[@nm33x]

can we control this motor with tb6560 ?

[@GBWM_CNC]

No. This is a ac motor. You need a vfd for it. Tb6560 is a stepper motor driver

[@eliminatorBN125]

Hello. How to change the settings and start it remotely, not from the desktop?

[@GBWM_CNC]

Hello. Check out my video where I show how to setup this VFD for mach3. Mach3 is using a relay output which starts the vfd remotely. P0-02=1 is the parameter which allows you to control it by a terminal input.

[@eliminatorBN125]

@@GBWM_CNC Thank you.🙂

[@GBemblaze95]

@@eliminatorBN125 you're welcome 😁

[@iacovacheiuliangheorghe64]

Hello, I have a lathe with a 3kw / 380v motor, I can put a 4kw Toshiba converter on it. I mention that at home I have 220v and I connect it to a converter with 220 input and 3 phase output

[@GBWM_CNC]

I don't know your converter but probably there won't be 380V on the vfd output. A 4kw vfd can be used on a 3kw motor though but the max output current / power has to be set properly

[@iacovacheiuliangheorghe64]

@@GBWM_CNC It seems that the person I'm buying it from has installed 20-30 for large companies and individuals, so he knows what he's doing, he's a professional, so to speak, he assured me that it works without problems. Now I'm waiting too. He installed another converter for me on another bench lathe that works ok

[@GBWM_CNC]

@@iacovacheiuliangheorghe64 so no worries! :)

[@markred4112]

Need to stop immediatelly, how to do? Is it capable to work for emergency stop? Maybe need a separate circuit for this function? Thanks :)

[@GBWM_CNC]

If I remember correctly it is possible to connect a e-stop to the vfd. But stopping immediatelly depends on the inertia you have to decelerate.

[@escapedillinger]

Hello, thanks for this video ! Any idea why my vfd frequency doesn't go upper than 320hz, while it's supposed to go up to 500hz..?

[@GBWM_CNC]

Maybe there is a upper limit parameter set to that value? Or you're using an analog voltage input less than max?

[@escapedillinger]

@@GBWM_CNC thanks for your fast answer ! The upper limit is that actual value that doesn't go upper than 320hz. Maybe a voltage problem... But what parameter to change then..?

[@GBWM_CNC]

@@escapedillinger hard to tell tak be honest. Best way would be checking the manual - there are usually tables with parameters described

[@escapedillinger]

@@GBWM_CNC after some researches, it appears that this AE VFD is sold for 500Hz max frequency but only support 320. So back to seller and I've order another one on Vevor. Thanks again !!

[@GBWM_CNC]

@@escapedillinger oh snap

[@melizalubrico2245]

Hi where to connect sensor for waterpump switch?

[@GBWM_CNC]

Hi. I'm not quite sure what do you mean

[@MrCharlie108]

Hello , Excellent work . Can we use this ac-drive control motor by torque control ?

[@GBWM_CNC]

Hello! I don't a standard VFD can control motor by torque. You'd have to buy an servo drive I think

[@Ferdsf100]

Please, help me, I need to set similar driver with nvcmv2.1 6 Axis to change Speed in mach3

[@GBWM_CNC]

I've got no experience with nvcm sadly

[@davidwhite9676]

Just purchased this mini vfd to use with my 2.2kw cnc spindle . Been making notes from your video (which is great by the way ) regards to parameter settings but would I be correct in saying that if I want to control it via my cnc motion controller, P0-02 should be set to 1 ?? I want to use 0 - 10v for speed ref ????

[@GBWM_CNC]

I'm glad my video helped! Exactly, you should use p0-02 = 1. I've got on my channel a video about setting up this VFD with MACH3 where I show the parameters I use for 0-10V control on this VFD

[@davidwhite9676]

@@GBWM_CNC Hi there , thanks for your quick reply , unfortunately I’m using the smc5-5 offline controller but I think it’s similar to Mach 3 , Not entirely sure though !!! Thanks again for your help and info !!

[@GBWM_CNC]

@@davidwhite9676 I don't know that controller, but MACH3 uses 0-10V output too so the parameters on the VFD should be the same I guess. Good luck!

[@ocho7011]

Cześć, wiesz może jak wystartować silnik za pomocą przycisku chwilowego? Na razie musze ciągle wciskać przycisk by motor się obracał ;/

[@GBWM_CNC]

Najlepiej przycisk bistabilny

[@ocho7011]

@@GBWM_CNC czyli za pomocą zwykłego przycisku nie ma szans?

[@freddiepasitengpawi1792]

are stiil need a capacitor or not?

[@GBWM_CNC]

3 phase AC Motor don't require a start-up capacitor. 1 phase ac motors usually require them.

[@freddiepasitengpawi1792]

@@GBWM_CNC i have a motor here 2hp 3phase can can i buy that vfd ill put here to my motor

[@GBWM_CNC]

@@freddiepasitengpawi1792 Mine is a 3HP 3 phase and works fine with this VFD :) You just have to configure it right to your motor and you should be fine.

[@freddiepasitengpawi1792]

@@GBWM_CNC thank you my friend for that info ill look a vfd like that ill put to my motor

[@GBWM_CNC]

@@freddiepasitengpawi1792 great!

[@istotazycia6710]

hey! Swietny filmik instruktazowy :D mam kilka pytan do ciebie co do tego falownika: 1 - czy uzywasz go i czy sie nadal sprawdza? 2 - czy rozwazales dolozenia brake resistor? 3 - przejrzalem pobierznie dokumentacje i nie widzialem wyjsc na dodatkowy moduł dla przycisku "emergency stop". Czy w urzadzeniu sa dodatkowe wyjscia na podlaczenie takiego przycisku? Dzieki za info!

[@GBWM_CNC]

Dziekuję! odpowiadając: 1 - używam w tokarce w moim warsztacie domowym i działa cały czas jak należy; 2 - nie rozważałem bo w moim przypadku akurat nie ma potrzeby; 3 - W mojej instrukcji, którą kiedyś gdzieś znalazłem widzę zapis, że do wejść DI1-5 można przypisać e-stop, który według instrukcji jest funkcją nr 47 czyli np. podłączając zgodnie z schematem sygnał z grzybka pod np. DI4 to trzeba by ustawić parametr p4-03 jako 47 i powinno działać pod wejściem DI4.

[@istotazycia6710]

@@GBWM_CNC Dzięki wielkie za odpowiedź!!!

[@piotrmatak3578]

Cześć mam pytanie , jak zmienić kierunek obrotów silnika za pomocą panela ? Dostałem instrukcje ale niestety w języku Chińskim .

[@GBWM_CNC]

Cześć! Tutaj jest instrukcja po angielsku: cnccat.com/cnccat_photos/files/ski780-1d5g-1_manual.pdf Nie zmieniałem obrotów z panelu - warto zobaczyć w instrukcji. Jeżeli nie w taki sposób to na pewno będzie się dało wejściami cyfrowymi.

[@piotrmatak3578]

@@GBWM_CNC dzięki !

[@ichkannsnet]

Hallo ich finde den Parameter nicht um den Motor über die am Sako eingebauten Start Stop Taste zu aktivieren.

[@GBWM_CNC]

P0-02 = 0 (Parameter, mit dem Sie den Motor über das Bedienfeld steuern können)

[@ichkannsnet]

super vielen dank !!

[@ichkannsnet]

bei mir geht run nicht.Stop geht.

[@GBWM_CNC]

@@ichkannsnet P0-03 = 3 Hast du das auch eingestellt? Es ist für die Potentiometer-Frequenzquelle verantwortlich.

[@ichkannsnet]

@@GBWM_CNC ja ist eingestellt.Poti geht ja auch.Starten kann ich nur über D1 und GND.Da ist mein Schalter dran.Vielleicht liegt da der Fehler.

[@deepnitrox]

I love your work. where are you from?

[@GBWM_CNC]

Poland here ☺️☺️

[@deepnitrox]

@@GBWM_CNC what is that drink 🍹 in the intro?

[@GBWM_CNC]

@@deepnitrox it's yerba mate 😁

[@เลอศักดิ์ลือนาม]

พอร์ต RJ45 ทำยังไงครับ

[@GBWM_CNC]

มันเกี่ยวกับอะไร?

[@เลอศักดิ์ลือนาม]

@@GBWM_CNC I what connect for port RJ45 to ext. But! I don’t settings

[@GBWM_CNC]

@@เลอศักดิ์ลือนาม This VFD don't have a RJ45 from what I know

[@เลอศักดิ์ลือนาม]

@@GBWM_CNC thanks

[@lucashusdal1852]

why 400V and not 230?

[@Playd0w]

230V volt is the voltage between ground and one phase. And between two phases you have 400v here in germany

[@domenicofarina7125]

at low rpm the torque is low...I can increase the torque delivered by the electric motor...thanks

[@GBWM_CNC]

This is physics. Sadly it's hard to obtain high torque on low RPM. If you want low RPM and high torque then you need a pulley

[@domenicofarina7125]

@@GBWM_CNC Power= momentum×angular speed ... but I thought a minimum of adjustment was possible ... I will change the transmission ratio ... thanks

[@GBWM_CNC]

@@domenicofarina7125 You can try to read about vector and scalar control method in VFDs. I didn't try but there is a setting in this vfd to change the method. Vector control should provide more torque. But that's some theory I know from classes - got no experience. You can try to make some research - maybe changing the method might provide the little extra torque you need.

[@domenicofarina7125]

@@GBWM_CNC sai dove posso trovare il manuale completo dell' inverter?

[@GBWM_CNC]

@@domenicofarina7125 www.sakohz.com/download/20190124124714147.pdf

[@AndreasVolke]

Du solltest dir vorher mal einen überblick über die farben verschaffen. Der blaue ist und bleibt der nullleiter und wird nicht als phase verwendet

[@GBWM_CNC]

You're right. I was using just the wires I had lying around

[@imregyongyosi7971]

Hungary beállítást el tudnád e küldeni

[@GBWM_CNC]

hogy érted?

[@thorsten_w]

Oh man, is this a video of what you could do wrong when doing electrical installation ??? 1. NEVER drill the cables when crimping !!! 2. NEVER EVER use earth line (green/yellow) for anything other than earth potential !!!!! 3. Ground the motor properly !!! 4. Connect the calble at the motor connaction panel BELOW the U-brakets. Always use the left side of the screw, because then the rotation will pull the cable in, not out.

[@GBWM_CNC]

1. Why? 2. This was just a fast test setup, wouldn't use that wire for a real wiring in a cabinet 3. OK! 4. Good hint, won't forget :)

[@corlangerak4310]

@@GBWM_CNC But how can you ground the motor on this VFD? just add the groundwire to the ground of the input power?