🛠 Connecting Your Dash in NSP | TECHNICALLY SPEAKING

[@mbminitrucks1]

Currently installing elite 750, IC-7 & wide band O2 in my project. I was having an issue getting it to turn on... after a quick phone call to the awesome tec support and the problem in my wiring was located. So happy I choose haltech, fingers crossed it starts tomorrow.

[@peopleschampgarage7869]

After experiencing AEM CD5 dash and now Haltech, this is a million times easier and better ❤🎉❤🎉. The only cool thing about AEM is the track mapping. If Haltech ever incorporates this into ic7, 😮😮😮😮😮😮😮😮😮😮

[@VeteranTuner]

use AiM Sportsline, that can read HaltechCAN too.

[@jesus_built_my_hotrod]

I miss OGSIXE 😢 Cool video, still deciding to go the 7 or the 10

[@canoPR]

Tell us about the logging via dash, TIA

[@MicrowaveNut]

Any plans to have more custom looking dash gauges? I just purchase this for my Supra build and wouldnt mind being able to go for a more retro gauge look ❤

[@maximumarrigato9736]

there is already a pretty retro 90's looking dash screen in the options

[@AshLongie]

100% I would like to do this also be able to move stuff around and change gauges etc seems like an easy software update from there side

[@paulmcdermott6123]

Great video Scotty. I’m super interested in data log in standalone. Also allocation of Christmas tree light to a Avi in stand alone. (to use to show transbrake is on )

[@kadebugler9]

Should do a video on setting up buttons and controlling out puts though dash

[@slatery1]

I'd love to see how to pass data from the vehicle can network, through a Haltech ECU and into the dash

[@jackmcdonald6226]

Wiring in a boost solinoid would be great to see

[@michaelleonard4020]

Thanks for that info it was a question i sent a few days ago about the Tacho I am just about to set up the elite 2500 on my turbo territory with a ic7 dash I did have 1 question about the alternator pwm unit can it be switched off as i will be using a normal 2 pin alternator Great products thanks

[@denisbassom172]

Good tutorial but still awaiting confirmation on WHICH channels you receive from Motec...it doesn't seem obvious from NSP, or I am being thick.

[@Kpastrsn]

For platinum ecu would that be haltech v1 for the can setting?

[@nomansland92]

Are you able to stream generic sensors configured in the ecu and see them on the dash? This was previously possible but doesn’t seam to be anymore?

[@bullstarz]

What data will the dash send over CAN and whats the CAN ID. Is there an update so the dash CAN speed be changed to 500mb/s as it could be in the ICC software

[@Quattro80v6]

Will Emtron be added anytime soon?

[@CJ5EVOLUTION]

Dumb question, if I have a Elite 1500 and I will use both the Dash IC-7 and the Haltech O2 module where both need to be connected thru a 4 CAN port extension, both the IC-7 and the O2 module have to communicate to the ECU CAN 1 port, will this cause some conflict of communication with two modules ( IC-7 and O2) sending data thru that port? do one need to make an special communication configuration on the NSP software for this situation?

[@charliedunleavy7566]

How do we select different ohm styles for fuel level sensor

[@haltech]

We cant just yet, but we are working on this for the next Dash update - you will be able to enter the fuel level calibration in resistance vs fuel level!

[@importtunerknowitall]

@@haltechI haven’t updated yet but once I do would I be able to simply calibrate fuel level as voltage and then convert it to percentage based off of min/full voltage readings like the previous ICC software?

[@nodekapunk]

@@importtunerknowitallyes

[@AshLongie]

Oooo this will be a massive help I've manually put resisters in lol 😂😂😂

[@MikeJones-bj1cn]

Will the haltech dash work with the Holley Sniper? Thanks.

[@stephenb5114]

Can you add PD 16 output data display on nsp ic7 like you had on icc software.

[@v8tergt653]

How responsive is the speed using the gps if connected directly to the dash ?

[@enriquecisneros22]

Can it be used on a link ecu?

[@thezer2]

what about the outer way around, from a ecu to the dash, like headlights, i wanna wier them to the ecu, but the ecu REQUAER a Output? and just wanna show it on the dash.

[@Rchingy]

When can we expect to be able to change our logos again? :)

[@andrew_fc]

When are we going to have lap timing and track data available?

[@haltech]

Sorry, we don't have any information on that

[@MrQuartermilerun]

Is there anyway to daisy chain a third party ecu through a wb1 and have them both work?

[@haltech]

Unfortunately not. The WB1 may be broadcasting on IDs that the 3rd Party ECU is using. Unless its a Link ECU, in which case the WB1 can be setup with the Link ECU and all will be right with the world.

[@AdinSLaboy]

Witch Hondata u said ihave a s300 v3 but this its obd1 i relly want this on my Da integra that will be 🔥

[@obriansmith2141]

Emtron support please

[@Eswenson89]

Watched this video multiple times. Still cant get the dash and ecu to talk to each other

[@haltech]

Please contact our technical support team via www.haltech.com/contact-us They'll be happy to help you out :)

[@aussiebloke609]

I don't really know why I watch this. I find it fascinating, but my vehicles have a cable for the speedo...and another cable for the tacho. And a cable for the clutch. And two cables for the throttle. The only input sockets are where the cables attach. 😁 Old motorcycles are awesome - and simple. 👍