Connects2: Guide to the CTMULTILEAD.2

[@mrcross5716]

Do you know how long it’s taken to find a video that explains this? Connects, you really need a better instruction “manual”

[@Connects2Uk]

Hi, Hopfully you have all the info you need now. If you need any further help or support then please contact our technical team. Thanks C2 connects2.com/Home/Contact

[@JohnPreston888]

"Instruction manual". Not really. "sheet", yes, but a manual is a book. That said, this video was extremely useful. Had it not shown the Kenwood example, I would not have had the confidence to cut the unneeded wires so that it was configured for my JVC head unit. Many thanks for posting this. I have now taken my X-Type from the dark ages (cassette deck) to a DAB/Bluetooth/CD with steering wheel controls for all functions except making calls. Yay!

[@Connects2Uk]

Hey John, We try to keep things simple but yes there is a slight misunderstanding about the "manual", but we have to persevere with industry norms aha Glad everything worked out for you however, we would love to see a picture if you could share it on our facebook/instagram @Connects2 :) C2

[@yokomodrifter]

If it wasnt for this video I would of never figured it out.Thanks connects2

[@e575fho]

Just fitted mine to my Passat. Thankyou to Connects2 all steering wheel functions work etc and you do not need a pro to fit it, just do your homework beforehand ie: vids like this :)) Awesome bit of kit....

[@dheyzhenntolentino2328]

Hello sir! I would like to ask how the three wires connected for chinese headunit?

[@energylevels1]

as someone who hasn't got a clue I don;t really understand the KEY, KEY 2 and GND and what I'm supposed to do with them, if anything on a Sony head unit?

[@Hysteria135]

Thank you for the video. Can you please confirm, i am installing a Nakamichi headunit, the instructions say to use Key 1 Bullet connection, do i also need to connect the ground wire or Key 1 only? Thanks

[@Connects2Uk]

You will only need to connect the key 1 bullet connector

[@seanbirch3641]

Hi iv got a Ford Fiesta mk7 with your double dim kit. Iv plug it in the street wheel in the wired remote input on my pioneer Stereo but can’t seem to get the buttons working? Iv followed all the instructions for a pioneer set up HELP ME FIX THIS ASPA PLEASE

[@koizumigarage]

I want to connect to Panasonic's navigation, but should I connect only KEY1? "Do I have to connect GND?"

[@Connects2Uk]

Hi, You would be required to connect Key 1 from the patch lead to the corresponding SWC Key 1 connection on your radio. You would also be required to cut the orange (J1) loop. For any further technical assistance you can submit a ticket tech team via support.connects2.com/tickets/technical. Kind regards, C2.

[@kevinrussen8180]

Hi Am having trouble understanding the diagram have a sonyXAV‑AX8050D have plugged the jack plug in remote port but no steering controls help needed

[@Connects2Uk]

Hi, I would suggest that you speak to our support team they will be able to give you advice. support.connects2.com/tickets/technical/ Thank you C2

[@LUCYDIAMONDBOXER1]

I have a Kenwood DAB 8020 with a connect2 canbus but the parking sensor car icon doesn't display anymore?

[@Connects2Uk]

Hi, I would suggest that you speak to our support team they will be able to give you advice. support.connects2.com/tickets/technical/ Thank you C2

[@manoloman563]

Tkanks to this video i managed to install the controls at the wheel with sucess. Thank you very much. ;-D

[@MatthewNash92]

what happens with the other leads with red connectors (gnd ,key 1 , key 2) if I only need the 3.5mm jack (sony stereo) ??? cheers.

[@Connects2Uk]

Nothing, they're isolated enough to just sit there, C2

[@fredheimer]

Hi. I don't want to cut the cables but pull the small pins of J2 and J3 completely out of the connector. How do you get them out?

[@Connects2Uk]

Hi, Please speak to our technical support team and they will be able to help. connects2.com/Home/Contact Thanks C2

[@aanichin]

I have Pioneer AVH-2330NEX. Where do I connect KEY1, KEY2, GND?

[@vdorin7958]

For Pioneer, no cuts needed.

[@Mutyi07]

Hi! I have a Subaru Forester Sg 2007. I have a jvc main unit but i dont know were i connect the key 1 cable on the car. Sorry my terrible english 😁

[@Connects2Uk]

Hi, Could you please submit a support ticket at support.connects2.com/tickets/technical/ to get a qualified help from our UK technical support team. Thank you C2

[@ematpconser]

Hi! I need to connect a Voolt mp10.1 in a Nissan xtrail. What colors I need to cut? I connected the plug to the header, but wheel control do nothing.

[@Connects2Uk]

Hey Axel, Contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2

[@andyseasman5814]

What configuration is needed for a Grundig GX-32AB with just a purple and ground wire please?

[@Connects2Uk]

Hi Andy, you will only need the green wire, as mentioned in the instructions viewable here. www.connects2downloads.co.uk/C2/files/InstallationGuides/CTMULTILEAD.2_v2.pdf

[@andyseasman5814]

@@Connects2Uk Cheers works a treat! Thanks

[@DS55HAW]

Hey I have the chinese learning system where do the key 1 2 and ground wire go please I have a mk2 megane

[@NicholasNRB.Barnett]

My Chinese head unit does not have extra key 1 & key 2 wires, they are part of the main plug, can I tap into those for this purpose?

[@alfonzoroman1899]

hi i drive a ford ranger 2018 t7 i bought the ctmutilead.2 and ctsmartlead , ctsfo018.2 and cam-fd1-rt the aftermarket radio is a black spider bsdd-2620dvd the reverse camera dont work aswell as the steering please help

[@Connects2Uk]

Hi, I would suggest that you speak to our support team they will be able to give you advice. support.connects2.com/tickets/technical/ Thank you C2

[@vikkidyer]

Trying to set this up on my Kenwood stereo and I've been told I've got to connect key 1 to the blue and yellow stripe wire but I don't have a blue and yellow stripe wire to attach it to. My car is a Vauxhall zafira 03 and it did have a car300 cassette player installed. Really hope someone can help. Thanks

[@Connects2Uk]

Hey Vikki, To sort out any wiring complications, contact our tech department through support.connects2.com/tickets/technical and one of our technicians will get in contact with you, C2

[@9freelandk]

The blue and yellow wire is within the genuine 16pin Kenwood ISO harness connector adaptor. It's a terminated wire that will not be connected to anything on one end and usually covered with a sticky label telling you its the remote control input wire.

[@lshigham18]

I have a Xtrons head unit and have crimped all 3 wires (Key 1, Key 2 and GND) to the relevant wires on the head unit... is that correct?? Only asking because the guy here said he is only connecting Key 1 because his is a Kenwood head unit and I just assumed you always connected them all?

[@Connects2Uk]

Hey, This is all correct, for the 'Chinese Learning Headunits' you will need to connect all the wiring and then go through the learning mode of the unit (most commonly) but for unit such as Kenwood and Panasonic, you would only need to connect Key 1 C2

[@stretchie]

Hi there, I just got a used car that had a Kenwood and have replaced it with Xtrons also. So which wires on this connector did you connect the Key1, Key1, and gnd to that come out of the back of the Xtrons please?

[@jamesmoore3246]

Hi I am trying to conect up a gx-3800 do you know what leads I need to cut and conect up thanks

[@Connects2Uk]

Hi James, I would suggest that you speak to our support team as it depends on what vehicle you are installing into, they will be able to give you advice. support.connects2.com/tickets/technical/

[@jamesmoore3246]

@@Connects2Uk I have done had an email back now and Al sorted

[@bahweepgrah-nahweepninibong]

@@jamesmoore3246 what solution was it

[@williampatterson5178]

HI their a tryed that pluged in the yellow plug and the jack lead and nothing controls on steering wheel are not working thanks william

[@Connects2Uk]

Hey +William Patterson, What i suggest is that you send a query over to support.connects2.com/tickets/technical/, tell them all of the parts used and some pictures of your setup too and our team of technical advisors will be able to sort out what has gone wrong, C2

[@balubalu82]

Hi! Opel Corsa 2015 Kenwood dmx7017 which level to cut

[@Connects2Uk]

Hi Balazs, for a Kenwood head unit you will need to cut both the Orange and the Green wires, an example of this should be available in your instruction manual

[@LordWamphyri]

Hello! I have a UK Vauxhall Meriva A (2008) and the Connects2 kit I bought came with this patch lead. I'm attempting to fit a new Pumpkin HU, I've connected the Key 1,2 and GND wires as per the manual, however when I try to get the HU to learn the steering wheel keypresses it is only detecting one out of the 6 buttons. Is this the right lead or do I need something like the CTSMARTLEAD? Thanks!

[@Connects2Uk]

Hi Chris, Could you please submit a support ticket at support.connects2.com/tickets/technical/ to get qualified help from our UK technical support team. Thank you C2

[@simoneplaci3896]

Hi, i have a kenwood radio and i have understood that i have to connect the key1 to the remote control cable. But where I have to connect the gnd cable? Or it have to remain disconnected?

[@Connects2Uk]

The Ground will have to be connected to a similar ground wire in the cars original harness or somewhere similar C2

[@0vesen]

Hi, I just got this in the mail and are about to install it. Stupid question but do I connect the GND from the patch lead back to the GND on the male ISO-plug? (The plug that connects to the headunit)

[@Connects2Uk]

Hey, sorry for the late reply, the ground coming from the CTMULTILEAD.2 can be attached via bullet to a similar ground from the vehicle, you can splice this into the ground of the other plug if preferred, as long as its grounded to a sufficient grounding source, you're good to go C2

[@mikenefkens6626]

I’ve used this in its default config for a 2016 t6, but the Sony 3250 will not work at all with the wheel :/

[@Connects2Uk]

Hi, For technical assistance regarding patch lead configuration you can submit a ticket tech team via support.connects2.com/tickets/technical. Kind regards, C2.

[@alees491]

Do u need to alter any of the wires for a pioneer head unit?

[@Connects2Uk]

Hi, I would suggest that you speak to our support team they will be able to give you advice. support.connects2.com/tickets/technical/ Thank you C2

[@stevedavis9792]

hi, need help please, have connected as shown in video, do i connect the 3.5mm plug? and where does it go? the clock menu keeps coming up? i still cant control via steering wheel. have kenwood DDX5015DAB stereo. Thanks

[@Connects2Uk]

Hey +Steve Davis, For Kenwood radio's you want to connect 'Key 1' to the steering wheel remote, this will enable the steering wheel controls C2

[@grously]

Many people have problem with not working volume. So do I. I have 2 connects module STK452 10R-055745 for my berlingo Xtr 1.6HDI 2009. I connected everything as manual said step by step. But the volume buttons are not working as suposed. I cannot raise or down volume. When I press and hold them togheter for 2 sec I can open main menu. I can do the same with search buttons. It seems that radio and module have no connection at all. My radio is PIONEER DMH-A340DAB and there is SWC output. I connected jack plug from module to the SWC output of radio. But volume buttons are not working. A lot of people have the same issue.

[@Connects2Uk]

Hi, Our tech team will be able to provide you with further assistance. You can submit a ticket tech team via support.connects2.com/tickets/technical. Kind regards, C2.

[@blake10001]

hey im just a little confused on what wires to connect key 1 and 2 to is it a ignition barel position or something. i haven't bought my headunit yet but its going to be an android Chinese brand. are key 1 and 2 on that sorry if this is dumb because i havent got the unit yet

[@Connects2Uk]

Hey, On the Chinese head unit there will be two fly wires that will be labelled Key 1 and Key 2, the Chinese make things really simple, the only wire that might need to be spliced onto will be the Ground wire, unless it comes with a ground fly wire C2

[@blake10001]

Connects2 thank you so much :)

[@alainblaiserukundo7248]

Hi guys can someone tell me whats the next step after cutting the wires for JVC brand. I'm kinda lost. I don't see which wire goes where after cutting the green and purple. Thanks for your help

[@Connects2Uk]

For tech support please contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2

[@williampatterson5178]

hi their i have a renault scenic with a sony head unit a got the steering wheel adapter ctsrn005 patch lead do i have to chop in to the radio harness to wire this up i have key 1 key 2 and ground on it thanks billy

[@Connects2Uk]

Hi +William Patterson, Is the patch lead our CTMULTILEAD.2, if so, then all you would have to do is retain all of the J-loops and use the jack for the Sony to work with your vehicle. In future, you wouldn't have to hack any of the wires, essentially attach a female grip to the corresponding wires C2

[@williampatterson5178]

+Connects2 cheers bro

[@Christian-nd8yt]

Will this work with a Power Acoustik CPAA-70D radio?

[@Connects2Uk]

Hi Christian, Please send a message to our tech team and they will advise. support.connects2.com/tickets/technical/ Thank you C2

[@BrunoGomes-fg5cy]

Hello I have a Kenwood ddx-9717bts model, and my dealer gave me the single lead wire wich is the apropriate for this stereo, at least it`s what i think because it doesn`thave the one wire connection, but instead a 3.5mm jack. So my question is, is the connection for the canbus and to the stereo this lead patch ctmultilead.2 the correct one? Could you help? Best regards

[@Connects2Uk]

Hey Bruno, If you message our technical team through our ticket system they will be able to give you all of your answers support.connects2.com/tickets/technical C2

[@janscrayen9306]

Hi, I've got this for my 2016 Renault Trafic. But my Kenwood aftermarket radio has a jack and a wire connector. How should I connect this?

[@Connects2Uk]

Hey Jan, To get the CTMULTILEAD.2 to work with a Kenwood radio, you would need to cut both the 1st and 2nd J link (insulating to prevent any shortages from the exposed wire) and then connect the Key 1 to the wire connector, this will then transcode the correct binary language from the head unit to the interface C2

[@blake10001]

hey guys asked questions before everythings awesome and working just wondering if the 3.5mm jack is necessary for the controlls. if so all good i just want to plug in an external mic if possible

[@Connects2Uk]

Hey blake, The 3.5mm is viable dependent on the head unit, see the instruction manual for whether it is needed, C2

[@michapeterek3545]

Witam. Posiadam moduł ctstyoo1.2 mam toyota corolla verso i radio pioneer avh-z5200dab. Po podłączeniu do radia wtyczka jack do w/r radio cały czas wyszukuje stacje FM. Dlaczego tak się dzieje?

[@Connects2Uk]

Hi Michal, Contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm Best, team social @C2

[@pmgf24]

Hi ! I have Renault Megane 2004, and my new radio is Sony Dsx-A400BT. I bought this cable CTSRN004.2, and CTMultilead2, but i don't know where i connect Key 1 or 2 and the another cable. Can you help me?

[@Connects2Uk]

Hey, Looking at the CTMULTILEAD.2 instructions you will need to retain all of the links and only use the 3.5mm jack input for your Sony head unit, any more problems don't hesitate to contact our tech team at support.connects2.com/tickets/technical C2

[@pmgf24]

Hello, I tried to connect only with the jack but the steering wheel controls still do not work. I've also seen the video of how to mount the cable. But I'll try again. Thanks for the answer!

[@davecypher]

hiya, my Alpine HU has no mention of where key1 or 2 goes, nor does anywhere on Internet that I can find, can you please help? renault scenic mk1

[@Connects2Uk]

Hey, The Alpine will not work with the bullet connectors, it needs to have the 3.5mm jack connected to work, for further information, please see the installation manual: www.connects2downloads.co.uk/c2/files/InstallationGuides/CTMULTILEAD.2.pdf

[@jamieskoipond]

I have a 1.5dci Renault megane cc on a 07 plate want to connect my steering controls what lead do I need to buy. Thanks.

[@markbro4427]

Jamie Groom if you're in the UK contact Dynamic Sounds on eBay or their website ...if you're fitting a new head unit Sony and Pioneer are the easiest with just a jack plug connection,Kenwood, Jvc have a one wire connection...the adapter and patch lead (free with the adapter at Dynamic Sounds) cost me £23 for a Suzuki Grand Vitara.... works well,easy to fit.

[@rebelzorro4419]

Hi great video can you please tell me the difference between the ctmultilead & ctmultilead.2 thanks

[@Connects2Uk]

The CTMULTILEAD.2 is developed to retain more brands of head unit as well as chinese learning head units, head to our website at www.connects2.com to see what head units are associated with each part C2

[@MsiVip]

I want to fit the SWC to my "Eclipse cd 5030" Is it possible ? i have a brown and brown black wires called steering1 and steering 2 is it mean i can connect the radio to the steering control ?? because i can't see this brand on the list. Thank-you

[@Connects2Uk]

Hey, With the Multilead.2 it will have 3 flying wires that need to be connected instead of the 3.5mm jack for Chinese Learning Head Unit's, these being the Key 1, Key 2 and Ground, in this case I would take into account that the Steering 1 is meant as Key 1, the orange, green and purple J loops all need to remain in tact also C2

[@Connects2Uk]

www.connects2downloads.co.uk/c2/files/InstallationGuides/CTMULTILEAD.2.pdf

[@MsiVip]

Perfect !!! Thank-you very much !

[@MsiVip]

Hi !!! I followed your instructions and connected the steering 1 to key 1/ steering 2 to key 2 and the ground. but only one button on the stalk responding ( the "mode" function on the stalk raises the radio's volume) ... is there any way to teach my radio to do the stalk's commands ?? or maybe my radio can't work with CTMULTILEAD.2 at all ??

[@Connects2Uk]

Hey, With the Chinese Learning Head Unit you do normally have to go through a process to determine and set what buttons do which functions, this should be found within the manual, but no doubt you can find it online by searching for the head unit. C2

[@martinscivier8981]

Need help please. Wired a Connects2 CTMultilead to my Pioneer DEH-X7800DAB Used all 3 links without cutting & 3.5 plug into socket on radio. Steering remote works but Volume only turns up whatever volume button I press!

[@Connects2Uk]

Hey Martin, If you message our technical team through our ticket system they will be able to give you all of your answers support.connects2.com/tickets/technical C2

[@daveyh444]

how about showing us how to set this up with a JVC head unit which doesn't have a jack plug as the manual doesn't cover this

[@Connects2Uk]

Hey +David Hall, The video sets out to explain the general fitting of the CTMULTILEAD.2. In the manual, it states for the JVC that you would have to maintain the orange J link only, severing the connection of the Green and Purple. In regards to the jack plug, the manual states that you either use the Jack/Key 1, so if a jack connection isn't present, then Key 1 will have to be connected to the 'Steering Wheel Remote' wire, C2

[@daveyh444]

I have done everything you have mentioned with no luck

[@Connects2Uk]

Hey +David Hall, That is quite peculiar, i'd suggest send off a quick enquiry to our tech team here: support.connects2.com/tickets/technical/ and include a couple of pictures of your current set up within, our tech team will help whittle down what the problem is, C2

[@daveyh444]

+Connects2 OK, I'll do that when I finish at work

[@daveyh444]

+connects2 there was no need for me to make an enquiry as I had visited where I bought the adaptor from (Halfords) and it turned out I needed a bullet connector for my stereo remote wire to attatch to the Key1 connector. by sheer dumb luck I found out I had to hold the source select button on my steering wheel for the adaptor to learn my car (03 Plate Vauxhall Vectra)

[@saeed1akuk1]

Hi sir I have bought Chinese aftermarket head unit and please help me to install it as I have also bought connect2 accessories thank you

[@Connects2Uk]

Hi, Apologies for the late reply, but please use our tech team portal: support.connects2.com/tickets/technical/ C2

[@skootyboy123]

hey,so i have a sony radio now and i dont need to cut any wires,just plug it in.is this correct?

[@Connects2Uk]

Yes, the sony doesnt require you to cut any of the J Loops C2

[@skootyboy123]

many thanks for your reply.

[@ThePoseidon300]

Hello, my car is Suzuki Grand Vitara 1.9 DDiS '07 and my chinese car stereo is Xtrons TB706PL. I bought Connects2 CTSSZ001.2 with CTMULTILEAD.2 patch lead and the connection has been made by an electronic specialist. Unfortunately, after the completion of buttons pairing procedure, the steering wheel buttons are being confused. For example, when you press (vol +) steering wheel button, the radio channels are changed etc. How can I solve this problem?

[@Connects2Uk]

Hi Nikos, If you message our technical department via support.connects2.com they will be able to identify the problem C2

[@liviu9181]

I bought a JVC KW-R520 and i don't know how to install the wires... I don't have a Jack on the player

[@liviu9181]

I saw a comment of yours below and i tried that (keeping the orange wire connected and connecting the key 1 to the Steering Remote) and IT WORKS.

[@Connects2Uk]

Hey, glad to see you sorted the problem, but if you do run into any problems in the future, be sure to contact our technical team at support.connects2.com/tickets/technical/ and they will be able to contact you back with a solution within 24-48 hours C2

[@alainblaiserukundo7248]

@@liviu9181 hi i also have a JVC and i think i'm facing the same issue. So basically i just need to cut the green and purple and leave the orange. After that step i'm stuck. Which wire do i connect in key1. Wht about key2 and GND?

[@chejobity]

hi there I want to buy your product for my range rover sport l320 2009 to work with this stereo Android Car Radio GPS 2 DIN Podofo 2G+16G 10.1 Inch Touch Screen Stereo Bluetooth WiFi FM Mirror Link for Android/IOS will it work ?

[@Connects2Uk]

Hi, I would suggest that you speak to our support team they will be able to give you advice on what what is needed. support.connects2.com/tickets/technical/ Thank you C2

[@CamaGoesGym]

So for a pioneer radio i dont cut anything and just use the 3.5 mm??

[@Connects2Uk]

Yes that is correct C2

[@Funnyvideos11132]

Hi, get it with your pioneer ? I have put it in befor 5 days It have works well , but today morning , my car didnt start , so i Charge my car , and also they didnt start , i have a lot of Problems in car , they Show me anything . So i put the cable out , and wait a While, then my car works again. So what can i Do, i have a fiat 500 cabrio 2015

[@Funnyvideos11132]

I have only plug and play, also , i didnt connect the 3 gnd key1 key2

[@rocstar1618]

What wire does key 1 connects to?

[@Connects2Uk]

Hi, thanks for messaging us for technical queries please contact our technical department via support.connects2.com/tickets/technical/ Thank you C2

[@superbobbytaylor9]

Where do I connect key 1 to for jvc stereo ?

[@Connects2Uk]

Contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2

[@Madogen]

Hi. I've just bought a 2006 Focus with an aftermarket JVC head unit. It has your looms etc, but the steering patch lead looks like it has been mauled by a rabid animal. I have replaced some of the wiring, but did the key1 wire used to have a resistor or diode in heat shrink? Doesn't look like it was just a wire, unless something had been spliced into it by a previous owner. Thank you.

[@paul1desm]

I need help to connect to an atoto s8 ultra and the car îs audi a4 b7

[@Connects2Uk]

Hey, Contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm Best, team social @C2

[@tranceman22]

If I understand it correctly then to fit to my JVC kd-r794bt I cut the Green and Purple wires... leave the Orange. Connect the steering wheel controls (blue/yellow) wire to key 1 and attach the ground to the metal of the car body.

[@Connects2Uk]

Yes this is correct :)

[@M1lh0u53ISGaming]

Very helpful, perfect.

[@dannajuarez4904]

disculpen no lo podrían hacer en español para sus clientes en latinoamericano por favor

[@Connects2Uk]

Hey Danna, Keep your eyes peeled and I will see what we can do ;) C2

[@harryali5573]

Hi, I have a road angel RA-X721DAB head unit. What would I have to do to make it work with my steering controls

[@mathewfoley1531]

Hi I got a Alpine ilx_w650 installed it using acouple of patch leads one with the steering wheel remote cost like $100 extra for the leads plugged it all in everything worked but the steering wheel controls the vehicle is a 2008 Toyota corolla ,been on line trying to find a solution ,I haven't cut any of the J wires yet have you got any advice ,thanks

[@Connects2Uk]

Contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2