containerterminal 1/87 deel 2

[@alankjkj1]

I have looked at many container cranes but this is the best by far. The spreader is absolutely incredible. I wish this could be bought in a kit. I would like to think that if one of the many companies that produce models made this into a kit they would sell out fast.

[@cledersontp]

Thank you! I buid a crane with 3D printing. I used your solutions for spreader opening and stabilization!

[@jhonny1392]

Thank you so much for sharing. This new Spreader is simple FANTASTIC ! ! !. Your project is a great inspiration for me. I hope in the near future can do something similar; the only problem for me is mine has to be in N scale ! and this is gonna be a HUGE CHALLENGE !, but I'll do my best or at least, I´ll try . . . Congrats, and cheers from Chile, South America, John.

[@munsterrail]

incredible work - very well done!

[@pascualcontiniello2881]

My buen video . Saludos.

[@randysrockandrollrailroad8207]

Cool

[@TRAIN_MAN23]

Wow how You made it move, would you like to do the same and where did you get such a crane or did it yourself

[@ingokonen5755]

I Love this crane ... I whis ibhave this one ... Is it possible to get a construction Instruction ?!?

[@lboekhoven2613]

Hello. After many years of trying is this the result. now I am busy with other things. (see "de kraan op de oude haven") don't give up trying.

[@pascualcontiniello2881]

Very Good

[@Vinserietje1988]

Wat een prachtige containerterminal. Is dit zelfbouw of zo gekocht?

[@lboekhoven2613]

Vincent S In deel 1 heb ik een reactie geschreven. het origineel is een bouwpakket van Roco, nr 1805. dit is nog maar zelden te koop op beurzen. ik heb het bouwpakket flink verandert. de spreader, de grijper voor containers is 100% eigenbouw, mbv 3d printer. De originele kraan kan je zien in de filmpjes van andolik op KZbin.

[@JamesBondsSkyline]

I am motorising a Kibri container crane at the moment, I'm currently designing a new spreader for it, what would be best for the motor to grab the container? I'm not sure what would be best? Congratulations on your design of spreader, it has given me confidence on a future design

[@lboekhoven2613]

I used a micromotor with planetaire gear for adjusting the spreader, and grabbing the container. One motor for two functions makes it easyer to build.

[@JamesBondsSkyline]

Thank you for your reply. I was not sure about using a micro motor as I did not think it would hold the container. I will have a go at my design and see how it goes. I will certainly plan to produce and build a spreader like yours, once I have learnt 3D design

[@karmashift248]

👍👍👍👍👍👍👍👍👍👍👍👍

[@jeromedonofrio8434]

hello, what the brand of your container crane ? it's very interesting. i like it.

[@lboekhoven2613]

jerome D'ONOFRIO the original model was Roco 1805. I Think it is not on the market anymore. I changed it in a ship to shore.

[@osmanpasha96]

Incredible! Can you make a video about how it works? How does the whole crane move, is the motor inside the crane or under the table? How big are the motors, did you gear them down? What model of the motor is this?

[@lboekhoven2613]

Hi! Only the motor for moving the Crane is under table. It is a motor from an old VHS recorder. The others are: moving, lifting grabbing, and lifting the beam. These are micro DC motors with gear. From China.

[@osmanpasha96]

@@lboekhoven2613 thank you for the response! And did you gear the motors down? How did you make such tiny gears?

[@lboekhoven2613]

@@osmanpasha96 Find the N10 motors with planetair gearbox. There are lot of choises.

[@osmanpasha96]

@@lboekhoven2613 thank you! I'll definitely try something like this in future

[@JamesBondsSkyline]

Where would a good source be to find out size and dimension of the spreader? I have made a first draft of a spreader on the 3D printer but I’m not sure it is correct size. I have googled for images and I think I found dimensions in metres? Kind regards Iain

[@lboekhoven2613]

Start with the dimensions of the containers: If you want to pick up 20ft containers, and 40 ft containers, the spreader "lenght"should be about 6 cm, the telescope length is about 3 cm on each side.

[@lboekhoven2613]

In scale HO of course!

[@JamesBondsSkyline]

Excellent, thank you for your help.👍🏻

[@Night-zn4ew]

How is this motorised, does it use PCBs and if so where can I get them? How much did this cost in total

[@lboekhoven2613]

Hi Jammy, just small micromotors, no PCBs. The ROCO1805 is not on the market anymore. But my next model will be 3d printed and mayby designed for production.

[@Night-zn4ew]

@@lboekhoven2613 How is it controlled without a circuit board? Also, you can get them on eBay.

[@simon_xf4803]

Hallo Ik ben zeer onder de indruk van de werking van de spreader ben al langere tijd op zoek naar een werkende H0 spreader . Zijn er mogelijkheden om er 1 bij u te kopen ? groeten Arjan

[@lboekhoven2613]

Nee, het spijt me, maar ik kan geen productie opzetten, en kwaliteit, en garantie leveren zoals dat zou moeten.

[@JamesBondsSkyline]

Out of curiosity, where did you buy the gears from?

[@lboekhoven2613]

Find them on this chinese website. look for geared micromotor, or planetair gear micromotor

[@Night-zn4ew]

How did you make it move without PCBs, surely you need them to control the micromotors.

[@lboekhoven2613]

What do you mean PCBs? I use 3 speedcontroles, that is all!

[@Night-zn4ew]

@@lboekhoven2613 PCB Printed Circuit Board. Basically a computer. But I understand, it all links back to that tangle of cables in the crane jib.

[@lboekhoven2613]

@@Night-zn4ew Yep!

[@Night-zn4ew]

@@lboekhoven2613 I will be using DCC to make mine move as that allows for accessories like lights and most importantly, the electromagnet to grab the containers.

[@lboekhoven2613]

@@Night-zn4ew Grabbing containers with elektromagnets is not easy. I grab the container with a force on the front and rear side of the container. I like the idea that the grabber is telescopic and it is as long as the container you will grab.

[@eisenschweinchen5354]

Great! Selfmade?

[@lboekhoven2613]

scratch building from ROCO 1805. Motorised with micromotors. Spreader designed, engineered, and 3d printed by myself.

[@eisenschweinchen5354]

Congratulations!

[@peterrobson1481]

Aode eu compro um produto dese equanto custa

[@lboekhoven2613]

Sorry, I don't understand!

[@johanvandenbrom3390]

Prachtig dit, leuk om te zien

[@JAALMARZA]

Nice job!👍👍👍

[@darrinto]

I love the way you have made this and I would like your input on how one can be made for O Scale containers .

[@lboekhoven2613]

Hi, I 'm not used to this scale, but I think the system will work, also in this scale, if the containers are not to heavy.

[@darrinto]

Thank you for your reply where can I find the same set up at my email is [e-mail]

[@captainugros]

what brand is the crane?

[@lboekhoven2613]

Roco 1805. But it is not on the market anymore. I changed this crane to a ship to shore.

[@christtking894]

Nice! Who is the manufacturer?

[@lboekhoven2613]

Roco 1805 is the original Crane. But I rebuild, and motorized it.

[@teadyconnolly9590]

Hi I Boekhoven I am trying to get HO Container Gantry Crane Fully Functional for over 4 years I want to know would you be interested in selling this model or would you be able to make the same crane for me please i am very impressed with this project beautifully designed I am praying hard that you will please contact me with good news I am living in Ireland I have 4 static HO Cranes and 1 Fully Functional 0 scale Lionel MI-Jack which is Fully Functional but there is no Jib / Grab and I can send this model to you have another project to get going I will be able to show you the Container Terminal I have only 125 well cars all going coming and going from the switching and the rest you can see very soon hopefully thanks again for excellent videos on your Container Gantry Crane I have to very well done on this model I am just hoping you get this Gmail

[@teadyconnolly9590]

Hi I Boekhoven I am just after getting my Skype going just wondering would you be able to get in contact with me please about this Container Gantry Crane please just to have a good chat and see how soon you can build HO Fully Functional Container Gantry Crane with all the specials Teady Freight Yard

[@lboekhoven2613]

I am sorry, this is not working. You need to search for the settings, and change the drawings to make it slide perfectly. The geared motor is not powerfull. So please try to draw it yourself.

[@renekromhout9153]

Zin

[@renekromhout9153]

Maak jij deze spreaders ook voor anderen ik ben zeer geintreseerd om er 2 te kopen bij je groetjes r kromhout

[@lboekhoven2613]

@@renekromhout9153 Hallo, René Kan ik contact met je opnemen?

[@renekromhout9153]

@@lboekhoven2613 ja hoor 0620121521 groet rene