Internals: RapidStrike

[@ContainmentCrew]

They are inductors, that is my mistake. I haven't had the blaster back open in a few days as we are waiting on replacement motors and I looking back at it now I did miss the markings on the PCBs. Thank you for pointing this out.

[@Waludalf]

This is very helpful since mines also broken and with this vid i can open it up without having to struggle trying to find out how to put it back together

[@AJsWorld]

This video helped me fix a broken n-strike, thanks!

[@watertakken]

I bought a Rapidstrike from Goodwill. I thought it broke. Because I kept pressing the trigger and it didn't rev. I was about to throw it out. Until I saw your video. When I got to the Jam door part, I was like wait something isn't right so I loaded darts in the mag. Inserted the mag and closed the jam door. I pressed the switch and it started to rev. I was like wow it works. I came so close to throwing out a perfectly functioning blaster. Very thankful I saw the video describing the parts.

[@BushcraftFeeling]

Thanks for showing all the tiny details :D

[@charlie156]

The pusher mech isn't "weird" it just uses a sun and earth gear system ( the same system used for old fashion steam train wheels)

[@visionboxed]

5:29 EMC shield

[@sambeecher6311]

On the top part of the battery chamber you actually can get it apart without cutting if you look from the inside and unbuckle the blue pieces that come through the orange

[@jjc5475]

7:14 pusher system. pusher isn't working on a nerf i bought from a little kid. on closer inspection it seems to be covered in a sticky liquid. i assume cola lmao.

[@jjc5475]

i think it's ice cream. i hope the pusher motor ain't burned...

[@devlintaylor9520]

does anyone know why my rapidstrike keeps firing even when i let go of both triggers?

[@harrsh7116]

No. Is it just a normal rapid strike, not modded? Make sure your batteries are placed in the right way, and inspect the trigger and fly wheel switches to see if they got jammed and got stuck.

[@ScaryGaryEarly]

Looking forward to this blaster for awhile now.

[@SouthernBrisbaneNerf]

what's the deal with the rubber grommet in front of the flywheels? I've noticed that on Rayvens too..

[@awesomo3606]

Southern Brisbane Nerf Club they basically make the blaster shoot slower I think I’ve removed mines

[@harrsh7116]

@@awesomo3606 he quit KZbin, so he won’t be replying to you, ya should have told him like 5 years ago before he quit

[@harrsh7116]

😢

[@bonemaster6928]

This is a life saver

[@ScaryGaryEarly]

Really appears that Nerf is taking great steps to make their newer blasters a huge pain to mod.

[@TACCOFSX]

the SMD parts at around 8:10 were capacitors, not resistors

[@ShibsCoffee]

take it all apart, the wiring will be the same as the modified nitron. But please note that after you change the motors to RM2's the barrel width would be too narrow for the darts to go through. That is why in my modded Rapidstike, i completely sawed off my barrel

[@aributler5460]

The top switch on the trigger mech senses it the pusher is out, after you release the trigger and the pusher is still out that switch stays depressed sending power to the pusher motor until it returns back and the switch is no longer depressed, it does not sense if a mag is in the gun

[@nejihinata1595]

hello, i have a rapidstrike but the dart gets stuck all the time, any idea?

[@SonamSharma-hb1bp]

You you can show you can show the nerve 1 of 1 of 01841 how to open it because my Ganesh not operating

[@andrewburrows7711]

u can pull the battery thing out

[@AwkwardHypernerd413]

My rapidstrike's pusher doesn't work, I cracked it open and managed to take apart the mechanism the pusher was in, and put it back to get there with the pusher back in, but when I put the whole thing back together, the pusher still won't work, the blaster revs up but the pusher still won't budge, anyone know how to fix this?

[@schlongdas7250]

Take it out, and try to run the motor. Obviously if it will run without the gearbox then it’s a mechanical issue

[@gamerguy425]

I am having an issue with mine where the trigger gets stuck in the depressed position when firing, I hope I can do anything about it because I've never modded anything.

[@harrsh7116]

Open it up, maybe it got caught somewhere on something as the trigger gets pulled.

[@gamerguy425]

@@harrsh7116 I don't repair nerf stuff but my best guess is probably some spring on the trigger is worn out. If I opened it it would likely never come back together so best to just leave slightly broken alone.

[@chillyourbeanst7861]

Hey, does anyone know where the metal shaft/ pin goes? I'm trying to put mine back together and it's driving me mad!!

[@danielauen7790]

How much did you disassemble your rapidstrike?

[@chillyourbeanst7861]

@@danielauen7790 all sorted now thanks anyway, it was just the pin for the stock.

[@Dan-fn1uw]

hey guys is that white rubber piece behind the flywheels necessary?

[@1mrracer]

Actually it is the complete opposite, the rubber causes it to jam. The dart will load just fine without it.

[@gavinfuzzy]

I highly doubt there needs to be so many wires in that thing... It could probably be rewired in a much simpler fashion.

[@nerfdefender314]

Sorry for incoirect spelling, im tired and my eyes are droopy

[@dd3times995]

Does this nerf gun work with different mags?

[@hunters.s1856]

Yes

[@naazrael]

thank you for some one realizing they are not additional thermistors. it always irks me to see that hahah.

[@Oniwah]

I wish my Lansing area target would carry all these new Nerf stuff! checked in for a week and on release date for zombie strike they tell me they are unable to put on shelves until wed. afternoon because of all the back log of boxes they haven't been able to stock.....grrrrrr.....and im gonna say this on every new nerf video i watch because I want to play with children's toys!

[@jaylengraves1903]

I subscribe

[@nerfdefender314]

I was te furst person to sub, and the rapidstrike would be awesome in my arsenal

[@JonMaroca]

Us can remove all parts

[@chickenman759]

Hi

[@banana_in_a_tuxedo]

none of the FUCKING screws will move, theyre all stripped, and i cant find any screwdrivers other than those big-ass flat tipped ones! the peg that pushes the darts into the flywheels got stuck for the second fucking time, and it wasn't anywhere near any sand, unlike the first time. I am soooooooooooooooooooooooooooooooooooooooooooooooo fucking mad. I dont know why mine is so unreliable, but it keeps breaking and i have no fuckin idea why

[@KennyCutout]

Lol you weren't even first. You were beaten by a video relevant comment.

[@chickenman759]

Nice try everyone on being first....

[@kaizaraa9928]

8th