Control all your lights with the STREAMDECK

[@TriHouse]

This is by far the best tutorial I've seen for this, and HOLY that is some high quality D&D

[@Atmoseeker]

Thanks very much!

[@austindale3129]

First off, absolutely fantastic video! Came to watch because I wanted to know about the stream deck and became mesmerized by the D&D setup and I have never played it in my life nor am I gamer or any kind. The lighting and the sets are amazing, whisked me right away!

[@Atmoseeker]

Thanks very much! My favourite way to play D&D!

[@londonchapman3508]

Absolutely stunning work. I do not understand why your channel's not bigger. You absolutely deserve to be mainstream with the amount of creativity and focus you have. Well done. I always learn a lot when I watch your videos.

[@Atmoseeker]

Thanks mate, always appreciate the support! I think I would put it down to being inconsistent with uploads. I have kids and work full time, so it might be a month or more between videos. That said, it is a goal of mine to work out production a bit better so I can get more ideas out there.

[@londonchapman3508]

@@Atmoseeker same boat. Love what you do. It's an inspiration to the rest of us tabletop gamers.

[@ConstructedChaos]

WOW!! What a wealth of information! I feel as if I’ve been taken on an adventure and have been rewarded with the dragon’s horde! I need to start making more use of my stream deck!

[@Atmoseeker]

Haha Thanks buddy! The streamdeck is a fantastic piece of gear!

[@uoraziel]

this video is amazing !!! its all i ever wanted to know about lights and the elgato system... im blown away and im diving into this right now wow !!!! thank you so so so much !!

[@netdawgx]

I see that you're at nearly 11k subscribers but both the quality of content and production level of your video speaks 500k+ if not more. Keep up the great work and best of luck!

[@Atmoseeker]

Thanks very much! Very thankful for all the folks subscribing 🥳 thanks for your support! Love making videos for you guys

[@HappyDoesYoutube]

So years later I'm now trying to do lighting for my game room, I can't find any of the same lights that you use and was wondering if you could maybe renew the links or just make an entirely new video with what you've learned over the last couple years of your lighting set up

[@ssskids123]

Since I’m in the Mack ecosystem, I can get most of this done with an old iPad and HomeKit. But I love how you’ve integrated the non-HomeKit devices into the touch panel and I just looked and oh Lord they have a foot pedal! :-) Thanks for the breakdown and for the steps on how to get these things into AFF. Greatly appreciated.

[@Atmoseeker]

Thanks very much! Yeah the pedal's fun. Recently I've been using it to activate voice modulation.😄

[@Atmoseeker]

If you enjoyed the video and would like to see more exciting content on the channel, consider supporting me on Patreon or become a channel member! www.patreon.com/atmoseeker

[@jakejakejakejakejakejake]

Jesuschrist, what a setup! Incredible work!!! :O X

[@Atmoseeker]

Thanks mate 😄

[@Daemus_TV]

I approve the text and arrow banner strategy!

[@Atmoseeker]

Thanks matey!

[@MrAnthonyrd55]

wasn't even looking up anything related to your gameplay, just wanted to learn how to do a few different stream deck options. Really glad I ran into this, and now want to look into all the other stuff I could do with this stream deck lmaoo.

[@Atmoseeker]

That's awesome to hear! Glad to hear you found it helpful, thanks for watching!

[@batpixi_]

There were a few examples that just blew my mind 😮

[@marcusmosimann]

I’ve been waiting for this one! So excited that it’s finally here!!

[@miniaturewizardry7650]

One of the coolest things I have seen in a while!

[@MrSpookyDave]

Mind blown, per usual. Well done mate!

[@TheBattlinBarrowGaming]

Hey thanks for this video. Most useful. I have taken a step in lighting my gaming room for my next adventure where I need an ocean wave effect. I bought a cheap wave light projector IR controlled. I thought it will do for now see how we get on and in the future replace it with something that can be SteamDeck controlled (when I get one) but thanks to this I can see its not a wasted investment as I can use an IR blaster and control it via SteamDeck. Sounds I wrote my own soundboard application ( I am a software engineer by trade) that I control with a home made "steamdeck" (I have a video about it) but even my home made software from watching this I think I can even use a real steamdeck with that! Really useful video. Thank you.

[@Atmoseeker]

Thanks mate! Glad you found it helpful. Those wave lights go a long way, definitely one of my favourites.

[@kevinlong3356]

I don't know if you've already covered this in a video, but how do you control the projector and where do you get the projector scenes from?

[@Atmoseeker]

Thanks for watching! There is a video on the way that'll look at that setup, but in short I use the streamdeck to open a local video file in full screen (with the projector/tv set as a second monitor). I use VLC player set as the default media player for video files. If a video is playing in full screen, a newly opened video will open in that existing full screen window. I create some video backgrounds for Patreon members, but a large chunk of what I use can be found in this playlist I've been curating kzbin.info/aero/PLn9FTf3gHbvgc_ys3lhZVPlVpqTTTWQCe

[@stardustsupernova]

Damn, this video was wonderfully informative! I came looking around to see if there was a way to control smart lights via DMX, but ended up learning about a way I haven't explored before. Great video!

[@Atmoseeker]

Thanks! Gad you found it helpful 🙌

[@Vision_Backup]

Would love to see how you do music with a streamdeck, considering getting one to use for lights and music for in person rpgs.

[@Atmoseeker]

Yeah it's been great to control everything on a single button press for an encounter/scene. Music/sound is on the list for a future video!

[@fruehtv5509]

Really appreciate this video! I have some IR lights I'm trying to tie into my stream deck for the game room and this should help getting things moving! Looking forward to trying it out!

[@rompo]

thanks for the informative video, learned something new! awesome studio lighting too!

[@Atmoseeker]

Thanks very much!

[@RhysCozens]

This is absolutely phenomenal and exactly what I've been looking for! Just subscribed!

[@Atmoseeker]

Thank you! 😄

[@PuppetArt]

This has been really helpful to me and my company. Thanks!!

[@drtomrountree]

Awesome video, exactly what I was looking for! Thanks!

[@Atmoseeker]

Thanks for watching!

[@mikeg9493]

Thanks Sebastian for this video. I’ve been looking forward to this one on your channel and it’s going to be a huge help. Curious if you will ever be doing a video on how you create your DMX lighting storm effect in qlc+? Thanks friend and keep up the amazing videos!

[@Atmoseeker]

Thanks mate! This is a great idea to break down some of these lighting animations. Definitely taking this on board 👍 Everyone's fixture setup will be unique, but I'm happy to share how I've gone about making mine.

[@mikeg9493]

@@Atmoseeker Thank you sir!!! Excited to see it. I’ll be sure to send a message as I’m in the process of joining your Patreon.

[@Graemebles]

Dying to know what kind of projector you use for your backgrounds and how you do that setup

[@Atmoseeker]

Thanks, yeah it's on the cards for a future video. That background is with a 36 inch old tv I found in the trash. I use it as a second monitor to open video files with the streamdeck when I change scenes.

[@maury9527]

Such an amazing Video! Thank you for all your hard work ❤️

[@bradleygilmore]

I enjoy your videos so much! Thank you!

[@Atmoseeker]

Thanks mate 😄

[@DiceDragondnd]

did you make that dedicated video on how to setup sound on stream deck you mentioned in this video?

[@malla3330]

Love the video man, it’s exactly what I needed

[@Hub2Connect]

Thats awesome, however I would love to see a video or instruction to control the Godox ES45 with the stream deck. I was doing a search and got your video recommended.

[@Atmoseeker]

Thanks for watching! My first thought was if Godox was a service on IFTTT, then that could be triggered on the streamdeck, but unfortunately it's not there. Next I had a quick test with my godox SL-60w remote trying to get one of the RF blasters to work with it, but I think the ones I have can't do the right frequency. So my last thought is using a smart plug and triggering that off/on which seems to work well, but you don't get to control some of the settings on the light

[@Hub2Connect]

@@Atmoseeker Thanks a lot for taking the time to re-search and reply. I will try with smart plug and let's see.

[@johnvdl]

Thank you!❤ Very helpfull video😉👍

[@iMike2K]

Great video dude! I found it very informative and entertaining keep up the great work. 👍

[@Atmoseeker]

Thanks mate! 😄

[@ginesalmagro9233]

The information and way of explaining is perfect! congratulations! I'm trying to connect some DMX lights to my streamDeck, but I can't install the Focus Windows PLUGIN on my Stream Deck. When I hit the install button, nothing just happens. Do you know why this can happen? Thank you!

[@Atmoseeker]

Thanks for watching! Yeah I think that plugin's out of date. But I do have an update on how to get the streamdeck talking to QLC here kzbin.info/www/bejne/jai9aIiDpN6onZI

[@ChimeraWargaming]

I really appreciate your video. 💯💯💯💯

[@Atmoseeker]

Cheers mate!

[@Thornspyre81]

Oh crap.... This is amazing! I have a million DForge LED pieces and remotes so I'll see if this can help

[@Atmoseeker]

Thanks mate! Good luck! Happy to help as much as i can, so feel free to reach out if you get stuck 👍

[@alsitte]

another good video mate

[@Atmoseeker]

Cheers mate!

[@Flapinski]

The Focus Window plugin seems to be extinct. Any alternative?

[@Atmoseeker]

Yep put together an alternative here! kzbin.info/www/bejne/jai9aIiDpN6onZIsi=HClRH2nEc7CB0r-G

[@SimonEdge-d7p]

Awesome!! You had some Neewer lights in a previous video which I purchased. Have you managed to get them working with the stream deck?

[@Atmoseeker]

Thanks! Yeah this is one nut I'm still trying to crack. It's a bit trickier because it uses a dedicated app over Bluetooth, but I'd love to have it on the streamdeck too

[@SimonEdge-d7p]

@@Atmoseeker Yeah. There is a WiFi option when connecting device. But not sure if that works for the RGB176 or whether that enables it to be controlled over WiFi outside of the app

[@SimonEdge-d7p]

@@Atmoseeker kzbin.info/www/bejne/ppOxmml-j7l3e8U found this

[@Birfhum]

Very interesting! I've done something similar, but rather than using focus and hotkeys, I used a MIDI controller. My Elgato will send MIDI commands and it will be fed in QLC+ to change the scene, no need to focus on the app!

[@Atmoseeker]

That's a great idea! Will have to try that

[@Birfhum]

@@Atmoseeker I'll gladly provide more detailed instructions if it can help?

[@Atmoseeker]

@@Birfhum that would be amazing 😄

[@Birfhum]

​@@Atmoseeker 1- You will need an app that will allow midi to be sent through your computer. Think of it like a port, for midi controllers. I used "loopMIDI" and created a port named "streamdeck" 2- Within the streamdeck plugins, install Music - Midi by Trevliga Spel. 3- In Streamdeck, you can use the same calls you did before but, insteal of focus and keypress, use the midi controll. Choose Channel 1, then just select any key. I used 60+. On the midi out port, select the loopMIDI port you created previously. 4- In QLC+ under inputs/outputs, you should see the port you created previously. Make sure it is checked as an input 5- Have your scenes set up with functions and a virtual console, just like in your video. The only thing we will change will be, rather than having a key combination, we use an external input. You can use autodetect and press your key on your streamdeck to have it loaded up by QLC+ Hopefully this was clear and helpful!

[@Atmoseeker]

@@Birfhum thanks so much for listing this out! Looking forward to giving it a shot.

[@AlecMHansen]

Very cool. Do you do lighting work professionally? Or just as a hobby? Either way I love it!

[@Atmoseeker]

Thanks mate! Very much just a hobby. these videos usually come from a lot of trial and error 😅

[@mrteausaable]

I am not able to find the Focus Window plug-in. Please help.

[@Atmoseeker]

Hey mate, yeah it looks absent from the plugin store. I'll have to look into a work around. These days however, I've been using midi to control DMX lighting, which has been a lot better. Been meaning to make a quick tutorial

[@Atmoseeker]

Hey hey, i've got a new method of controlling QLC without the focus window plugin kzbin.info/www/bejne/jai9aIiDpN6onZI

[@WarRoomPL]

Hi there, great Vid! Do you need a bridge for Hue Lights to be controlled via Stream Deck? Or can you connect directly with the bluetooth like with the app?

[@Atmoseeker]

Thanks very much! Yeah a bridge is needed. The streamdeck controls the hue lights by connecting to the hue bridge.

[@tiffaleyshon1126]

Dude, I'm about to be starting a D&D show in studio space and this video is absolute gold. Thank you.

[@pierrebessette2018]

hello. thanks a lot . no way to use companion bitfocus to do something similar ? thanks.

[@Atmoseeker]

Hey thanks for watching! Yeah I've heard other folks run into this issue to. I've got a solution in the works, but long story short it uses midi to switch dmx scenes.

[@Atmoseeker]

This new video shows an alternative solution kzbin.info/www/bejne/jai9aIiDpN6onZI

[@dorkyorc4441]

New to the channel, do you have a video where you discuss your projector or screen beside the table?

[@Atmoseeker]

Welcome! No not yet, but it's been heavily requested so will have to make one 😅

[@Rig_JW]

Do you recommend Philips Hue Play? They are quite small and expensive. I would use them as a ambient light as I don't want to fill my room with any big stands (living room, not a dedicated space).

[@Atmoseeker]

Yeah they're quite pricey, but easy to set up. If you're in a living space I would more recommend some smart bulbs than hue plays. That way you can pop them in existing sockets or lamps. I use a couple of yeelight brand bulbs that are a bit more affordable, although they'll need IFTTT to change lighting scenes. I'm mostly using the hue plays here because they're more directional

[@Rig_JW]

@@Atmoseeker Thanks a lot. I'll probably do some mix of bulbs and 2 Play lamps to, as you said, add some more direct light.

[@iEdwinT]

What are you using to control the video feed on the screen?

[@Atmoseeker]

There is a video on the way that'll look at that setup, but in short I use the streamdeck to open a local video file in full screen (with the tv set as a second monitor). I use VLC player set as the default media player for video files. If a video is playing in full screen, a newly opened video will open in that existing full screen window.

[@iEdwinT]

Have you run into the problem of losing your mouse cursor on the display screen? I'm trying to find a simple VJ app to output to a tv or projector, but not have my OS see that screen as real estate my mouse can wander into.

[@Atmoseeker]

From time to time, but not enough to be bothered by it really. The simplest fix I've seen is in the multiple monitors settings, move the second screen from side by side to sit diagonally with the first monitor

[@FlutesLoot]

Masterful

[@EnriqueplayzYT]

Wowowowowowowwow Tysm I was wondering how to do that

[@SpookSterTTV]

You now need IFTTT PRO to use a webhook

[@Atmoseeker]

Ah shoot. Thanks for letting us know 👍

[@powerfriend]

Hey. Thanks for the VIdeo. Could you point me in the direction of using Soundswitch with the StreamDeck + ? They removed the MIDI app that used to speak with Sounsdwitch. Trying to figure out the new method for midi mapping Soundswitch to the stream deck Rather than Keyboard shortcuts, it will accept midi communication

[@Atmoseeker]

Thanks for watching! I've been primarily using QLC+ and haven't heard about the Soundswitch, looks pretty cool though! Been meaning to make the change to using midi for DMX with the streamdeck so will have to investigate it more. I thought there were still midi plugins on the streamdeck store.

[@DextersPBLab]

damn thats tidy mate

[@Zycorge]

The focus window plugin doesn't display any processes or a dropdown menu for me. Any idea what causes this or how to fix?

[@Atmoseeker]

Hey sorry to hear that. Yeah that plugin seems to be bugged for me too. I'm guessing because of some streamdeck updates. You can try an alternative plugin like the "Windows Mover & Resizer" by BarRaider to get the window to focus.

[@Zycorge]

@@Atmoseeker Thanks for the suggestion! :)

[@Z_3D]

I regret getting the govee lights and not Phillips!

[@Atmoseeker]

Yeah I hear ya. I tried to save cash in some Govee led strips. Phillips is definitely pricier, but has a pretty nice ecosystem

[@ltoz]

where do you get your backdrops like the campsite?

[@Atmoseeker]

I've been slowly collecting a bunch of backgrounds in this playlist kzbin.info/aero/PLn9FTf3gHbvgc_ys3lhZVPlVpqTTTWQCe

[@ltoz]

@@Atmoseeker this is awesome. Thanks!

[@uoraziel]

Is it best to but premiem with youtube not to catch an add duran runing backround on the projector

[@Atmoseeker]

I often make video background files for my Patrons, but if I use any from that playlist I'll download some 5 min loops and keep them locally. I just can't share those files publicly without permission from the creators.

[@uoraziel]

I have a little question. How do you get the image too pop up on the projector. I have my labtop a monitor now the projector. But my streamdeck 1 does not open full screen... and only opens on my main screen i have to drag it too projector. Helps

[@Atmoseeker]

For video backgrounds I use VLC player for my default program for opening videos. I'll then already have a video playing in VLC in full screen so when a new video file is opened by the streamdeck it'll open that in the already maximised window. If VLC tries to open a new window, there are settings in VLC to make sure it only has one instance of VLC playing.

[@uoraziel]

@@Atmoseeker amazing mate! Big thanks!

[@FANTHEORYTV]

What do you use to mount your HUE Play Lights?

[@Atmoseeker]

I use a pair of super clamp mounts and a 11" adjustable arm per light so I can clamp it to things. Affiliate links here: geni.us/qhs7VT geni.us/zVOacR2

[@FANTHEORYTV]

@@Atmoseeker You're awesome! Thank you so very much!

[@Atmoseeker]

My pleasure! Thanks for watching!

[@FANTHEORYTV]

@@Atmoseeker Thanks again! You and your channel are incredible! And thank you so much for the rapid response!

[@jacerlab]

can you do this without a webhook? they are removing it for free accounts

[@Atmoseeker]

Oh jeez that's disappointing to hear. Yeah I'd have to look into alternatives. No idea at the top of my head

[@thatguyyy6924]

If i use ifttt can i also chance the color of my leds and not just turn them off and on? I have a wird brand thats calld magic home smart home

[@Atmoseeker]

Hey thanks for watching! If you wanna control more functions it has to be one of the brands/services that IFTTT supports. You can search the services to see if it's supported.

[@shtil.spokoyno]

Is the Focus Window not working for you too ? don't the process or window selection arrows appear? has someone solved this problem?

[@Atmoseeker]

Sorry to hear it's not working for you, I'll have to give it a good test to check for myself. I have been working on an alternative to the focus window approach which uses midi signals instead which is proving to be a better approach

[@shtil.spokoyno]

@@Atmoseeker Thank you very much! I'm trying to deal with Midi. it works faster. good luck with your business

[@Atmoseeker]

Hey i've got a new connection method with midi walkthrough here kzbin.info/www/bejne/jai9aIiDpN6onZI

[@takamikakusha]

All of your vids are super inspirational, makes me look forward to having a dedicated room so I can try all these out. On another note, where are those giant trees from? They look amazing, definitely gives more of a giant redwood/lothlorien feel.

[@Atmoseeker]

Thanks so much! Those trees are an old terrain project you can find on the channel here! kzbin.info/www/bejne/Y2G5o4FrZ86Wq5osi=VaitE3MZH2lhi0x-

[@Match0Man]

ifttt is payed app so if you dont subscribe you cannot use it

[@RobertGossCreator]

You are very limited with the free ifttt account