Control Appliances with your Voice WITHOUT INTERNET | PCBGOGO

[@GOURAB_DAS_12]

Yup! we need that video with the external microcontroller

[@tonymathew5618]

Can we integrate this voice assistant with home assistant?

[@arthus1971]

Yes of course, definitely "yes" Master. Make a video adding a microcontroller please. Greetings from Chile.

[@techiesms]

Ok Your wish is my command But the video will take some time as the modules are currently out of stock

[@gtaplayzz]

@@techiesms how to connect rgb light strips uding this device please make a video , i wanna buy this device from your website

[@NAVEENKUMAR-ji2ug]

yes do a video on external microcontroller

[@techiesms]

Sure Once the module comes in stock I’ll try to make the video

[@abhijithsaichinni]

Waiting for the external microcontroller video!! And also a blog about this project so i can get a list of components and try doing the project !!!

[@sivajireddygamerreddygamer]

You make home automation using esp32 and 4g gsm module in blynk application app

[@techiesms]

I’ll try with 4G

[@vinothn4228]

External mic means it will helps in more ways ... Like we can use this for yelder / patient peoples 👍✅

[@poornimashukla1520]

Hi bhayia Can you make playlist of how to install components like capacitor, inductor , resistor etc with some basic electronics engineering knoweledge It will help me a lot…

[@Saifali-tu1ik]

Hey add esp32 as a external controller to this project, and program it for esp Rainmaker. So that if internet is there then u can control the home from any where, as well as u can have offline voice cmds.

[@akashjadhav566]

I really want this type of video because the internet 🛜 depend or WiFi blutooth depending is time consuming we have to go to that particular app of web then control that application it's very time consuming that's why it's very important I love this ❤

[@shlokrp]

This guy really makes some useful video!!!

[@techiesms]

Glad to hear that! 😀😀

[@JapaHunter]

He is the Boss❤️, Much love from Nigeria 🇳🇬, please the uart video communication is much needed boss ,i.e communication through the rx and tx pins of vc 02 module, through hex

[@techiesms]

Coming up this Sunday…..

[@JapaHunter]

@@techiesms love this thanks so much boss ❤️❤️💥

[@massimomalesci352]

Hi Sachin, nice video as always! I just want to ask you why you put that orange capacitors (if they are capacitors), what's their purpose?

[@sakethpuppala1016]

Please make a video configuring this with external board

[@techiesms]

Suree

[@donniealfonso7100]

Why hard-wire when you can control using a hub and smart plugs, smart outlets and bulbs. For most smart home products Python libraries are provided for use with Arduino and this and other speech recondition modules from various sources.

[@phaquasystems2685]

Is it true that vc02 we can only use UART TX but not Uart Rx, yep make a video with microcontroller communication

[@hk0954]

If you add remote control light on off with the voice then it will be very good project

[@SuperKnightwind]

yo its soo great!! u have the schematic diagram for these?

[@techiesms]

It’s in the video itself

[@basicelectronics6324]

Please make a video on uart communication of vc02

[@NareshKumar-bm4oe]

Please make a video on how to send commands to external micro controller

[@techiesms]

Sure We will make it as we got a lot of demand about it But it will take time as we are currently out of stock with vc02

[@apurbakhanra2464]

Techiesms video came!! First hit the like button then start watching video. Please upload video on external microcontroller using UART with vc-02

[@techiesms]

Thank you so much 😊 And sure, as I got a lot of demand about this I’ll make a video on connecting external microcontroller with vc02

[@amdadulhaque4625]

Obviously try an external microcontroller and also try to interface i2c GPIO Expander module to increase the number of usable GPIO pins.

[@سورپرایز]

THANKS A LOT . MicroControl using ON this Board , PLEASE make video ... PLEASE💝

[@techiesms]

Okkk Will make the video on that once the module comes in stock

[@asrkvlog2579]

Hope You do for us the next vedeo external controler

[@techiesms]

Sure Not the next one but I’ll make the video once the vc02 comes in stock. Currently it’s completely out of stock

[@adamjarwanto]

How tu turn on tv or ac?

[@karandex]

Can you make videos on home assistant and esphome. Haven't seen any Indian making content for it.

[@techiesms]

Already made it sir

[@StuckFree-69]

Please reply 😢Sir i have an issue i was on step to upload the firmware file but by mistake i have uploaded the wrong file and i it is not getting reset and im unable to new firmware because not the rest button is not working

[@sriramansrinivasaraghavan5846]

yes , please do a video n external microcontroller where in we need more IO.

[@alekhoik151]

Good job sir

[@alekhoik151]

Can I add a manual button?

[@anik2645]

It willbe more effective when manual and voice both willbe organised

[@shubhasri25]

Do you have any company where we can build a custom built sbc with specification and is is a company we can build based on requested design and ship to us? If so can you create a one video on it Thanks Sri

[@rtech7193]

please make a video how to connect it to an arduino.

[@boubacardiagne9847]

Hi, think you for your important and helpful videos. Do you ship to US?

[@techiesms]

Yes Just WhatsApp your requirements on [phone]

[@boubacardiagne9847]

@@techiesms Thank you

[@bob_mosavo]

Thanks 👍

[@techiesms]

Welcome 👍

[@jaredsalazarofficial]

Aside from using their website to prepare firmware for these module, is using vscode or similar still an option to prepare firmware locally? Do they offer programming using platforms like arduino or micropython?

[@subropaul950]

yes ,please make a mini table robo which has expression like EMO robo, which can control some of these actions alsoo

[@subropaul950]

using these ai thinker

[@sreekar.2002]

Yes

[@dharmikvankani227]

Please give all components links and discription

[@jajacall4354]

Sir do you have a schematic diagram?

[@Curiouskannadiga]

External microcontroller

[@technovation-qb2dv]

yes

[@fouziya7014]

Can we use this device for controlling ur10 manipulator robot through voice. Plz reply

[@techiesms]

I haven’t used that so can’t anything But this module works with any controller with UART communication

[@arijitghosh8292]

Yes definitely make a video adding a microcontroller with this VC-02. But I think the cheapest solution is that you did in your smallest home automation project.

[@techiesms]

Sure I’ll try to make video on that

[@coolairsolution3552]

Yes I.

[@hemanthgarikina3544]

What is the name of the relay

[@ighost_1337]

R2 and C9 function ?

[@geniusgamer2882]

Yes plzzz

[@rtech7193]

how many times can I burn the firmware to vc-02?

[@iyzer_]

Create ai assistant which use chat gpt and google assistant but talk in hindi

[@wavesofmusic8096]

Sir please provide gerber file 🙏🙏🙏 of the pcb

[@invisiblestudy5161]

I would like to buy it but it is out of stock 😢😅

[@techiesms]

It will be available after 10-12 days

[@invisiblestudy5161]

@@techiesms I want some changes in it would you provide me

[@SibleKhan-hk1vt]

Purchase link please

[@techiesms]

techiesms.com/product/offline-voice-recognition-home-automation/ Currently out of stock but you can WhatsApp us for advance order

[@Developer.abhi07]

Give pcb file

[@absolute4001]

Pcb diagram dalo bhaiya free me pls

[@Kysoon-lx2hx]

PCB Gerber file

[@hasstv9393]

Money money money

[@kavinrajr96]

Yup! we need that video with the external microcontroller