Add Custom Voice Control to any Project using this Module without Internet

Buy this Module from our Store - techiesms.com/product/ai-thin...
This is the VC-02 Kit from Ai-Thinker which supports upto 150 voice commands and we can customise those voice commands to any command we want and can also control the GPIO pins based on the voice commands. And the best part, this doesn't require any wifi, bluetooth or and Internet Connectivity.
This is a perfect board to add voice control to any of your existing or new projects. Enjoy this video and learn something new today..
You can support me🙏🏻 and also get benefitted on Patreon :- / techiesms
__________________________________________________________
👨🏻‍💻 Important Links 👨🏻‍💻
Buy this Module from our Store - techiesms.com/product/ai-thin...
For Building Firmware, visit this site - voice.ai-thinker.com/
Documentation page which contains Firmware Burning Tool - docs.ai-thinker.com/en/voice_m...
__________________________________________________________
Buy the components for your projects and support techiesms💡🔌
ESP32 Dev board - www.techiesms.com/product/esp...
Seeed Studio XIAO ESP32C3 - www.techiesms.com/product/see...
and many more such components are available at www.techiesms.com
__________________________________________________________
⏱ Time Stamps ⏱
00:00 Introduction
00:08 Some Project Demos using VC-02 Kit
01:07 Agenda of the Video
01:32 What Comes in VC-02 Kit?
02:02 Testing BuiltIn factory firmware
02:39 Building Custom Firmware with Custom Voice Commands
05:01 Choosing Custom WakeUp Command
07:01 Choosing Custom Voice Commands & Custom Replies
09:35 Adding GPIO Controls based on Voice Commands
11:03 Showing you the process of Sending Hex Data via UART
12:02 Choosing Voice Commands that works without WakeUP Command
12:58 Choosing Voice and it’s Configurations
13:38 Choosing boot broadcast
14:17 Choosing timeOut period for sleep and it’s reply
15:07 Choosing Voice Command for Quit (Going back to sleep)
15:36 Choosing Reply statement for Quit
16:02 Building SDK
16:30 Downloading Firmware File
16:47 Downloading Firmware Burning/Flashing Tool
16:58 Steps for Flashing Firmware in VC-02 Module
18:14 Testing Our Custom Firmware
19:51 Range Test
22:41 Conclusion
23:13 My Upcoming Project
23:25 Get this VC-02 kit only from techiems.com
__________________________________________________________
🎥 🎙 My Video Gear 🎙🎥
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Tripod - amzn.to/3uNhC4H
Microphone - Zoom H1N(amzn.to/3Osh12A)
Editing - Final Cut Pro X on MacBook Pro ( amzn.to/3vHcSyJ )
__________________________________________________________
Get connected with techiesms everywhere..
Subscribe Main Channel :- bit.ly/techiesms_youtube
Subscribe Shorts Channel :- bit.ly/techiesms_shorts
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
Telegram - @techiesms
__________________________________________________________
techiesms
explore | learn | share

[@techiesms]

So what will you be making with this ?

[@emo666man122]

i need one for my robotics project but cant get one anywhere

[@etmax1]

how many commands can it support?

[@bat869cube672]

I have see the taobao it said english firmware not supports the wake up word

[@vijayraut6547]

Give voice to my HA setup

[@bhanumurugan5932]

Home automation

[@shadwxero]

Dude this is awesome! Thanks!

[@techiesms]

Glad you like it!

[@JapaHunter]

great project , waiting for more

[@DhPrajapati019]

Ye sahi tha abkibar 400 par❤❤

[@dr2man]

Great video, looking forward to seeing you intergrate other devices

[@IoTFrontier]

As always, it was a wonderful tutorial.

[@techiesms]

Glad to hear that you liked it ✌️

[@sterin7279]

Waiting for a crazy project with this

[@CeballosAvigail]

Saludos, excelente tu canal, una pregunta: el módulo puede reconocer diferentes voces a la vez o sólo la que se entrena?

[@bikelover6328]

Best 👌 thanks

[@TechnicalYarana]

one of the best project brother 😍😍

[@techiesms]

Thank you 👍

[@nagesh007]

Awesome 😍

[@imranics1142]

Brother you are awesome 😎😎😎😎👍 , i won't miss your videos ❤️

[@techiesms]

Just Keep Supporting and Keep sharing our videos ✌️

[@ryanwilliams3014]

I definitely will

[@uchitmodi7265]

Amazing project ❤ got a new idea to use it in my robot

[@techiesms]

Nice….

[@vijayraut6547]

Exellent tutorial as usual, Are there any wakewords which sounds lile.english words?, Wanted to try this for my HA setup.

[@radovansemansky4618]

excelent helpfull video

[@arthus1971]

Wonderfull... The first and unique AI Thinker firmware Tutorial. Now Just need an Arduino Uart application, for use more pins. Thanks from Chile

[@techiesms]

Yes you can easily integrate that

[@javiersoto570]

buen video...me ha aclarado un par de detalles...

[@dfordnya]

Loved that Abaki baar 400 par

[@user-dt6zq7oi9z]

thanks . and please make video for to attach micro controller 🙏🙏🙏

[@bob_mosavo]

Thanks 👍

[@techiesms]

Welcome 👍

[@fuzionftw3893]

thank you so much! can you make a video about this how to use a esp32 with this module please..? love your videos

[@amdadulhaque4625]

Can i program the bare VC-02 module without breakout board using FTDI module via RX TX pin?

[@amdadulhaque4625]

Is there any pwm output pin ? I think adding new custom voice command to (DF robot offline voice recognition module ) is easier than the AI thinker VC-02 module.

[@ryanwilliams3014]

This is cool, I had 2 of these at home, but I couldn't figure out how to get it to wake up... How do you know the 3 GPIO pins that have the leds on them? Warm, cool, and light pin??

[@iyoayedavid6725]

Cool. could you help with a schematic diagram and a vid using UART and IIC. IIC more preferrable

[@AdityaChauhan-ys7ek]

Bhota sai bhai

[@alpha_pixel_]

They should add some tones with commands like alexa. Like ding after command execution.

[@murugesh9338]

Excellent video bro. missed to mention in the video that "automatic study commands only support the Chinese version"

[@techiesms]

Yes, true

[@kavansketcher3214]

can i use it for with arduino to give voice command to this board and send that data to arduino

[@Ismail-cq2jc]

sir i have a Ai-thinker vc-2 main chip. is it possible to flsh and proggram this chip with esp32 or 8266? if it is possible please make a video.

[@matejhlaca5171]

How to conect vc-02 to ESP (not via gpio but via some protocol)?

[@user-eh1nd4nw9y]

Create a home automation project with this board using or LEDs, bulbs,etc.

[@drelectronics13]

How many max commands ? Can we add same settings shown in. Video for leftover commands , And secondly does it really detect voice if it's noisy around same as Alexa or Google , range test you did is in silent environment. This has to be best tutorial on vc02 so far m getting one .

[@techiesms]

Max 150 commands including wake up and all other commands Secondly in noisy environments it’s not performing well as it just has 1 microphone so we can expect active noise cancellation and precise listening I’ll test it on noisy environment and put up a video

[@chandrurn]

Just not love , truly madly deeply in love with this beautiful cute thing 💕

[@dr2man]

I have followed your directios to be able to have the AI thinker program create an SDK build although when I click on the link to build the SDK it fails. When I go in to the program again I get this error: GPIO_A28 default is low level It is designed as a PA chip enable control pin on the standard example development board, please confirm that the hardware design has been modified (high level will affect the audio broadcast function) I have attempted to change from high to low and low to high nothing seems to work. Do you have any suggestions?

[@techiesms]

do not use that pin I’ll post the image of the GPIO pins you can used in Vc-02 tomorrow

[@kapilpatel89]

Can i make a simple Live audio transmitter using this VC - 02? like transmit audio in local server in to listen that sound live in any locally connected device like pc tab mobile.

[@techiesms]

No

[@shortsblocker5076]

does the microphone range upto 31 feet? how the speaker sound is so clear from that far so you use two mic to record this thing?

[@techiesms]

Yes You can observe in the video that I have placed another mic near the vc02

[@automising]

Abki baar 400 par that was really appreciated 😂👍

[@mactub6744]

Hello, a question, do you think there is any way to make it recognize words in Spanish? Your videos are great! Saludos desde Cusco, Perú!!!

[@techiesms]

No

[@mr.whitetech3887]

Does The Boards Come With CH304 driver pre-installed? And If Not Then How To Flash It ?

[@techiesms]

Sir driver need to be installed in computer

[@nagarava]

What is the difference Df Robot Gravity Voice Recognition Module and Ai Thinker VC-02?

[@drelectronics13]

Gravity recognise any language but has less commands and can be programmed directly without programming,

[@nagarava]

@@drelectronics13 Thanks 👍🙏

[@sujoydas911]

Sir is it better than the esp ai thinker please reply.

[@sujoydas911]

Sir please repky..

[@agusheripurnomo2881]

Does this module support Indonesian? so we can say commands in Indonesian

[@sreeram9220]

Do you need website to create account and please restock it 😢

[@techiesms]

It will get in stock by end of next month

[@iyzer_]

Bhai esp32 ka use karke payment box banao jispe humare aawaz stored rahe aur payment hone pe humare awaz aye

[@techiesms]

kzbin.info/www/bejne/hqnCaqynlt6rabcsi=rBnoxwY32ktfrqqI Thank me later

[@theochub]

Apki baar 400 paar 🥰🥰💗💗

[@techiesms]

✌️

[@Yampaa]

Sb kuch temporary lekin Akbi bar modi Sarkar with 400 par is permanent.

[@etmax1]

Pity it doesn't do English wakeup and doesn't have more control over what the replies sound like.

[@emo666man122]

awesome but impossible to purchase here

[@techiesms]

Where r you from? As we also ship outside India

[@emo666man122]

​@@techiesms south africa, i'm trying to give my lil robot a low power alternative to running a raspberry pi for this very reason. as it just makes sense that this board is the answer.

[@emo666man122]

@@techiesms i'll level with you i am poor and disabled so import costs are not in my budget.

[@techiesms]

@@emo666man122 you can WhatsApp us on [phone] and we will guide you with international order

[@crooked8168]

An Indian tutorial assisted by an Chinese AI English voice, what could go wrong ?

[@Rp91000]

Abki bar 400 par 😂😂 petrol ka dam 😢

[@techiesms]

lol 😂😂😂

[@ashok_ign5623]

abki bar 400 par 😂😂😂

[@EMG-ELECTRONICS]

Hi sir. I want to talk to you by direct Message 🙏

[@DL-ge7oc]

Andhbhakt..

[@adityasuri999]

​​you lost me at that line "abki baar 400 paar".I have unsuscribed you. I will never subscribe you again and would never recommend your channel to any of my friends. I think a professional person would have kept his political ideologies away from his work. Its not about supporting bjp its about keeping your personal ideologies and opinions away from your work. Earlier you used to promote different companies doing the same thing, I know almost every electronics youtuber does that with pcb manufacturing but it reduces your credibility. Sure it gives fat profits in short term but in long term you start to loose people's trust. Promoting at most 2 companies doing the same thing is somewhat acceptable, you promote almost every major pcb manufacturer from china. I can ignore that. But Promoting a political party in peak of elections, I don't know you got paid for it or its your personal ideology, IT IS WRONG. And please don't take it as a hate comment but rather as a criticism. And again its not about bjp or congress its about ethics and morality of keeping personal and professional life separate. But one thing is for sure, you have lost an true subscriber, viewer and a customer forever.

[@user-local-host]

"Abki baar 400 paar" is amazing and 100% & 101% right.

[@usmanumer9871]

KYa Matlab

[@techiesms]

✌️

[@drelectronics13]

Dekhte hai

[@user-local-host]

@@techiesms absolutely 💯 💯💯💯➕️

[@adityasuri999]

​@@techiesmsyou lost me at that line. I will never subscribe you again and would never recommend your channel to any of my friends. I think a professional person would have kept his political ideologies away from his work.