that sunday keys template is BEAUTIFUL! definitely gives me Coldplay's X&Y era vibes lol
@6831473 ай бұрын
Very helpful to be able to control every little detail and customize this. I think it might be helpful to know (on the front end of this) that it is already mapped in Sunday Keys Concert. lol. I love the cloning of the patches to have the small vs bigger sound patches. Very cool.
@timclore73122 жыл бұрын
I really like being able to save separate patches for different parts of a song making those transitions very easy for the keyboard player. Thanks for sharing that.
@xFlapJack2 жыл бұрын
This is absolutely amazing, I’m not even the keys player at my church 😂
@pianodecrabdriver79772 жыл бұрын
I'm auxiliary role player in Sunday service in Goa India your videos are very helpful to me really appreciated for your videos thank you.
@antroxity2 жыл бұрын
Exactly the video I need! I was arranging my TouchOSC layout. Thank you again for these tuts and very cool patch of the week! Much love from the Philippines!
@ewheel16292 жыл бұрын
Great video lesson ….I’m new to MainStage and I was becoming a lil frustrated trying to figure out for live church service at times….thanks
@Bkamba3602 жыл бұрын
the korg nanokontrol 2 these days are 80+ I recently had to buy couple and those where the prices I found
@braxtonjackson_2 жыл бұрын
Thanks so much bro I'm new to the midi field so this video really helped me.
@nahumpena11522 жыл бұрын
Excellent, Thanks
@BrianEdennis10 ай бұрын
Thank you David, very helpfull.
@javaughnwilson728910 ай бұрын
This was so much help
@perryrossi8070 Жыл бұрын
Really liking your video tutorials. I am using nanoKontrol 2 with MainStage on a mac, mostly for faders for live use. Would you know how (or IF it's possible) to bump the nano from MainStage channels 1-8, then bump to 9-16? Many thanks!
@pianodecrabdriver79772 жыл бұрын
I love your videos superb ❤️🔥🔥🔥
@musicfortommyz81062 жыл бұрын
I followed exactly up to 9 min. untl it was time to do the mapping. Entering the Edit mode I could not get the same screen had to quit after that. Also, my NanoKontrol did not respond as easily as it did for you setting it up. Very frustrating for me to get this working the way I hoped it would. That being said, I do appreciate your help setting this up and I'll try again tomorrow. Thank you!
@SundaySounds2 жыл бұрын
Hi, you might try a different cable and doing a factory reset of the nanokontrol 2. Also, if you have installed the Korg driver before but are on Catalina or newer, Korg recommends uninstalling that driver as it can cause some issues: www.korg.com/us/news/2019/112902/
@satisfiedsiemens23432 жыл бұрын
then how do you control the 5th section and tonic
@4cooldog992 жыл бұрын
Following that has always been my question
@imandan1966 Жыл бұрын
Good instructional video. MainStage works great outside of churches also. Just sayin
@perryrossi8070 Жыл бұрын
Hi, Loved your nanoKontrol vid. Would you know how to now "shift bank" so i can switch from channels 1-8, to then 9-16? Thanks. Perry
@DanielMcGraw-i1uАй бұрын
Great Video but my nanokontrole is not responding to the buttons when I try to assign them. What should I do? Thanks!
@TemporalLobeMusic Жыл бұрын
I’m midway through, David… Another VERY helpful tutorial!! Is it normal for it to take a looonnnnggggg time to assign knobs/buttons/sliders? I’m going to wear the buttons out just trying to assign h to assign them. Thanks!
@aquavelvetman7 ай бұрын
I had the same thing happen. Had to twist the knobs 20+ times and same with sliders up and down and buttons. But eventually it worked.
@paulstewartkim4 ай бұрын
Same here, but I got the knobs and faders to work. I cant get the buttons to assign. Do you just have to keep pressing & just wait?
@Worship4LifeGuitar7 ай бұрын
What controller do you suggest to use to activate the keys on the Tonic section of Sunday Keys? I tried using M-Audio Oxygen Pro 25 and it doesn't recognize the pads to assigned the keys when in midi learn mode in SK. Help please 🙏
@Holmbendtsen2 жыл бұрын
This is great. Very informative. I have one question. Say i have 5 different songs with a Hammond plugin. Does mainstage load 5 instances of the Hammond plugin? Is there a way to make Mainstage songs share one instance of the Hammond plugin?
@itsSuppatime2 жыл бұрын
can you do a video like this but for ableton?
@davidcho63592 жыл бұрын
I have a general question. How do you get the sound from your MacBook pro to your Scarlett Audio Interface and then to your sound board? Do you need a passive Direct Box from the Scarlett Audio to the Sound Board?
@SundaySounds2 жыл бұрын
The Interface connects to the Mac via Usb, then you just set the audio output in MainStage to the interface. Focusrite interfaces do have balanced 1/4" outputs but if you need to make a long run to the board/snake you probably will need a di box - passive will work just fine.
@mark_slobodyanik Жыл бұрын
Korg NanoKontrol 2 is not available in my country. What other controller like this is suitable for controlling MainStage, Ableton or Sunday Keys App?
@KalvinistasX2 жыл бұрын
I would like to know how to control Ableton live with korg nanokontrol 2, because i still have a problem what knobs to use to control piano sounds easier
@yamansitar6153 Жыл бұрын
Hi , can you assign , play and stop ,record ,iv been trying to find how. And I like my perform screen for play back and words of the song Is there away to do this without all the faders and buttons Thanks
@paulstewartkim4 ай бұрын
I can't get the buttons to be assigned. Do you think macos sonoma is the problem? No matter what I do, I can't assign the buttons. Please help!
@ChaseMusic8710 ай бұрын
Hello im having issues mapping my nanokontrol to the sunday keys app.
@Fjaelyep4 ай бұрын
How do you set it up in the Sunday keys app on Mac?
@onzkicg2 жыл бұрын
For patch selection - Can I use foot switch, that same 2 footswitch used for page/sheet turner?
@markofjay2727 Жыл бұрын
When I try to assign my nano, it’s not giving a signal but the nano is plugged in and on. Just not getting signal
@tanelusin3430 Жыл бұрын
Hi! Thank You! My mainstage and nanokontrol, there is a issue. If I press drone button for example. It only lights up when I hold it down, but when I release, it also shuts off. How to change it, that it acts so that first press is ON and second press is OFF?
@SundaySounds Жыл бұрын
Hi! You need to set the button type in MainStage to "Absolute." This is covered about halfway though this video: kzbin.info/www/bejne/jmnOlKmajrKnmrs
@kzmpianist Жыл бұрын
Is there way to send back signal from Mainstage to nanokontrol 2 to highlight active button persistently, and not just when you push it ?
@SundaySounds Жыл бұрын
We have a tutorial here: kzbin.info/www/bejne/jmnOlKmajrKnmrs
@mygoogle1525 Жыл бұрын
Hi Is it possible to asign cc to a specigic knobs within 3rd party plugins?
@tomwehrle2 жыл бұрын
I’ve never used MainStage, but for 30 bucks, what a deal…curious, are you able to use multiple controllers to have even more sliders/knobs/buttons? And is it possible to group things? In this demo you’re trying to change 4 faders at the same time it looked like (maybe it 7), but it seems if you could group them onto one fader, then you could easily do those moves, and still get the mix you wanted with individual faders
@SundaySounds2 жыл бұрын
MainStage is an incredible value! You can use multiple controllers and keyboards - and yes its possible to group/map several parameters to a single on screen knob or fader.
@kyledeloach2 жыл бұрын
Why have the Korg Nano control if your midi keyboard can do the same thing?
@danieldevera91352 жыл бұрын
Can i use this nanokontrol2 to control the volume of each patches in the combi mode on korg krome? And how? Coz im having a hard time using the touch screen to control the volume of each patch during live performance. Tia
@francofernz93812 жыл бұрын
my church has a mixer and from the mixer we transfer the audio to the laptop and from there we do it from facebook. my question is, if i get a nanokontrol, do i need to plug my keyboard into my laptop too? and is that going to affect the audio that goes into facebook?
@SundaySounds2 жыл бұрын
You will probably want to use a dedicated computer for your keys rig, and one for your livestream if possible. We use the nanoKontrol2 to interact with the on screen modifiers in real time for your keys sounds.
@xcjfn Жыл бұрын
Hey! Great video, just a question - so my midi keyboard doesn't have a mod wheel, and I'm thinking of getting the nano Kontrol, would it be possible to map the mod wheel to one of the faders on the controller? Thanks :))
@SundaySounds Жыл бұрын
Yes, we also have a tutorial for that here: kzbin.info/www/bejne/q3nTdmeGZsSdrrs
@xcjfn Жыл бұрын
@@SundaySounds thanks so much!!! Legend 🙌🏻
@kneeyang89257 ай бұрын
I don’t use MainStage or ableton. Could I connect it JUST TO ONLY SUNDAYS KEYS??!! Pls help!
@SundaySounds7 ай бұрын
You'll want to use MIDI Learn. support.sundaysounds.com/hc/en-us/articles/5876663147287-MIDI-Learn
@karinaulmer9362 жыл бұрын
When I push the buttons, it does not keep that effect on. It turns right back off as soon as the button is let go. How do I make it so pushing the button keeps it on?
@SundaySounds2 жыл бұрын
Set the button type to Press/Release in Layout mode, then save.
@zendy4558 Жыл бұрын
Hi David, is korg nanokontrol2 compatible with mac os monterey? Does korg already have a driver for it?
@SundaySounds Жыл бұрын
Hi, it will work without a driver, if you already have the Korg USB driver installed, you can uninstall it to get things working again, Korg has an article on that here: www.korg.com/us/news/2019/112902/
@zendy4558 Жыл бұрын
@@SundaySounds thanks David for the reply and the link, I really appreciate it. God bless.