Controlling your CNC Machine through WiFi!

[@giova2927]

Hi, but using fluidNC I can monitoring the cnc for example when start, stop, wait, allarm, type allarm, ecc? And I can also send the gcode? Please help me

[@sendboxsac9480]

great, and if you want to scan again, and conect to another wifi, how can you do? thank you

[@ZepLabs]

As usual! If I am getting the question right!

[@aqib2000]

Sorry but this is WRONG. ESP8266 is a 3.3V microcontroller therefore you MUST use a voltage divider when connecting to the MEGA2560

[@songlessbird1]

Ερωτηση για την εφαρμογη σου. Χρησιμοποιω το πιο απλο esp8266 σε συνδεση πανω στο arduino cnc shield. Το εχω προγραμματισει ως access point. Το θεμα μου ειναι οτι με την εφαρμογη σου μπορω να στειλω gcode και τα μοτερ να κινηθουν, αλλα οταν παω να πατησω στα κουμπια για jog , μου επιστρεφει καποια error οπως error 2 και error 22 και φυσικα το μοτερ δεν κινούνται. Τι φταιει;

[@arminemmert8250]

Esp is 3.3V, Arduino is 5V, so I would have thought you would need a level converter on the RxTx lanes (?)

[@juangomez-ze6km]

esa placa wifi ya viene con un convertidor creo

[@mustafaonurucak614]

Hi.İs it possible to do this via bluetooth?

[@yuvarajvisvanathan3757]

Can use ESP32 for Wireless CNC machine?

[@ZepLabs]

Sure! If you mean to use the esp to buffer the commands to your controller, like here! I am sure you could use the esp32 as a controller, to start with, but I ve never tried that yet!

[@leonardoalterisio6514]

i dont find a wifi controller for android

[@Levisgil47]

Hello, Can you send gcode from stl file via wifi with your device? Thanks

[@ZepLabs]

Hey levis! And sorry for the late reply There is not an option to buffer a series of gcode commands in the app I made, but you could easily modify it to do so! Cheers

[@mustafaonurucak614]

Perfect works man

[@ZepLabs]

Thanks brother!

[@ahmetucak9351]

@@ZepLabs Hi.İs it possible to do this via bluetooth?

[@PiefacePete46]

That's slick Zep! :o)

[@ZepLabs]

Thanks sir! Cheers

[@LogicMathh]

thnx

[@ailtonsilveirarosa23]

Доброе утро, в Бразилии, @ минут, меня зовут Айлтон, то есть я много смотрю ваши видео и мне понравилось работать с Marlim в качестве ЧПУ, я такой же энтузиаст работы, как и вы, спасибо за все, что вы делаете Вообразите и, наконец, научите нас, но я не программист, но я хотел бы знать следующее: могу ли я использовать серводвигатель 9G, чтобы марлин работал как плоттер, используя ручки, если это возможно, у вас есть какие-нибудь идеи? как это сделать, выложите видео, большое спасибо, простите мой русский.

[@xecarfa9755]

U R *AWESOME*

[@ZepLabs]

Thanks bud! But the code-sharing community did the biggest part here 😁

[@sakisdiyprojects1911]

@@ZepLabs i agree with Mr. Tech !!!

[@xecarfa9755]

Hey share the stl file of your 3d printer design

[@hojo7258]

Why not use Octoprint on a Raspberry pi. I do and its is wireless has a camera and I can move,send G code as well.

[@ZepLabs]

Never thought that far! Will check it out though, thanks bud! A raspberry for a simple uart bridge sounds a bit like an overkill to me to be honest! Even with the ESP i do have some remorses... It is something like getting a four-cylinder/150 hp bike to deliver pizza arround the block I guess..makes your soul ache for that machine😁 Cheers bud!

[@hojo7258]

@@ZepLabs Its more than a uart bridge. It like hosts all your controls online as well as a storage and management of your G-code.