Convert to Natural Gas for HONDA EU3000is / EU30i Generator and Propane Extended Run Fuel Tank

[@fmlavios]

This video was really helpful. I can see that you've thought of just about everything. I feel much more confident in putting my extended tri-fuel system together. I appreciate your attention to detail and thoroughness in responding to frequently asked questions in your video.

[@GrenergyTriFuel]

Glad it was helpful, thanks for watching!

[@cheaptick]

For those using gasious fuel not vapor fuel like gasoline reduce your plug gap (.018 worked) and consider a hotter heat range. This was important to my getting an eu3000 to run well on LP... I have yet to fully test Nat Gas.

[@GrenergyTriFuel]

Thanks for your feedback

[@privateer4203]

Nicely done.

[@GrenergyTriFuel]

Thanks for checking out our other videos!

[@zbfire1389]

Where did you get the bracket to hang the regulator?

[@GrenergyTriFuel]

Hi, it is our own bracket we custom made. If you need this just shoot us an email at [e-mail]

[@zbfire1389]

fount it and order it, thanks @@GrenergyTriFuel

[@GrenergyTriFuel]

Thanks for your order!

[@James-ib2kp]

Three questions. A) On the Honda EU3000is are there carburetor bolt extensions needed to install your Tri fuel adapter ? B) Do you make a conversion kit for a Honda Gx340 ? C) what would be the cost for a 15’ hose for the EU3000is ?

[@GrenergyTriFuel]

A.) Yes and no, the older EU3000is doesn't need it but the newer version does. I include the extension anyways if you need it. B.) We're still working on it, the shop has been super busy lately. C.) For hoses longer than 10ft you'll need to up the size to 1/2" which would almost double the cost. This bigger size is non standard size and even I can't get hoses cheaper.

[@josephferradino3098]

Why does the demand regulator sit upright on the standard length 3' kit, mounted directly to the 30lb tank, and then the demand regulator is hanging upside down on the generator handle using the 10' kit??

[@GrenergyTriFuel]

Hi Joseph, It doesn’t matter if it’s upside down or right side up. The demand regulator just has to be in any vertical position, not horizontal.

[@MrPatdeeee]

May I buy the silver adapter; that is between the carburetor and the air box, as one thing? And what about buying a small kit.? That needs NO hoses or pipes; or anything else. Just the big round "Century" regulator; and the silver adapter? Because, I have all the rest, because I bought them from Amazon; and the things I want from you, I don't like in my kit. Please say yes! If so: What is the cost, tax + shipping to 30096. Thanks you kind Sir.

[@GrenergyTriFuel]

Yes, we can sell you this adapter. Please shoot us an email at [e-mail]

[@Al-bd8hm]

I purchase the tri-fuel kit from you and the allen key was not included. Please tell me what is the size of allen key? Excellent video.

[@GrenergyTriFuel]

Hi Al, sorry for the confusion. The Allen key is available when the extended hose kit is purchased. The size is 5/32".

[@Al-bd8hm]

@@GrenergyTriFuel Ok. Thanks.

[@GrenergyTriFuel]

@@Al-bd8hm Your very welcome

[@cheaptick]

Can you run this kit in the Eco mode and still have quick load response? I see you have alot of questions to get the fuel flow right... but what of the engines spark capability or other engine related potential issues that can be encoutered. Does your kit perform as if on gasoline in every way?

[@GrenergyTriFuel]

I would only use ECO mode for loads no larger than 1000watts. Or else you’ll over work the inverter unit and have it overheat. The kit works as it should and if you watch other videos on my channel you can read the feedback we get from our customers.

[@Like0Butter]

I’ve been following you for a couple months. This video is getting close to answering my question. I have 2 eu2200i’s. All I have access to are bbq tanks but I’d like the ability to either run one or both 2200is from 1 or multiple tanks daisy chained together. Is that possible? Say 3 or 4 bbq tanks feeding 1 or 2 2200’s in parallel?

[@GrenergyTriFuel]

Yes this is very possible. If you would like for me to custom a kit for this please shoot me a email [e-mail]

[@poolbump1234]

just converted an old eu2000i using your kit it works great with propane and gasoline. The next step would be to have natural gas line ready. Would you have a video with more details on this? I read the instruction but I am still not clear on what is needed, but video is worth a thousand words :-).

[@GrenergyTriFuel]

Hi, when I have some time maybe I’ll do a brief video of the natural gas hookup and the parts involved. Usually any modifications needs to be done by your local contractor with a permit from your county clerk. Enjoy your kit!

[@tanhvan1]

Look upside down to me.... The high idle is on the bottom

[@GrenergyTriFuel]

Hi, as long as the demand regulator is sitting in a vertical position this should be fine.

[@triphan7643]

You talking too much

[@GrenergyTriFuel]

And some people say I don’t make it clear enough or talk enough about their specific NG connection. Can’t make everyone happy.