Convert your SCX10-II to Vanquish VS4-10 Chassis

Step by Step instructions showing how to take a stock SCX10-II and swap to the Vanquish Products VS4-10 chassis. This will give you improved suspension travel, aluminum panhard mount, better center of gravity, more chassis rigidity, scale fuel cell and the ability to use many other accessories already available!
Vanquish VS4-10 Chassis: bit.ly/2EdOGeN
Vanquish Hurtz Dig: bit.ly/2JztGDy
Using a Dig will also require using the VS4-10 Angle Servo Bracket

[@JusRc]

@Harley Designs I know this old video but could you do a updated one, scx10iii to VS4-10 conversion

[@kablahj]

Just ordered mine from RRP!!! Cant wait to have it!

[@nicholasbarber4193]

Beautiful work on this kit, and even better work on the price point!!

[@dirtberger4533]

I have a Axial raw builder's kit and a bunch of vanquish and incision part to build my chassis when it shows up I can't wait!!!! Thanks for the info 🏁👍👍👻

[@bigchungus-oj8zz]

Groovy, I'm wondering if comparisons have been done? Cimb angles, sidehill angles, and such... At $110, it's an inexpensive conversion, if the payoff is there. Thank you bro! Super Sick!

[@Cobbaru2008]

Looks awesome I pre-ordered can't wait to get mine in the mail 😊

[@HarleyDesignsInc]

Shipping today or tomorrow from VP.

[@CarminesRCTipsandTricks]

The extra front travel just sold it!! Like your body idea too Josh. Carmine 🚂🚙 (The most hated person on RC social media 😲)

[@RCPropaganda]

Love the whole idea of this kit. It would be sweet for my Blazer. My wallet will be hurting this summer for sure.

[@00godlovesus]

I got some inspiring ideas out of it thanks for your time:)

[@petestaroska869]

I have been building a custom SCX10 On this VS410 chassis. There are some nice features with this kit, however if I was to do it all over again, unless I was planning on using all vanquish components I would just choose to wait for an updated version or just stick with an SCX10 platform due to the many headaches I have experienced with this build. 1). The sliders are narrow and can’t be adjusted wider to fit a slightly wider body causing the body to catch on rocks. 2). The massive crossmembers at both the front and rear are one large piece for rigidity, but eliminate many bumpers unless they are the post style or the flat style that mounts to the outer portion of the frame rails as you cannot eliminate the main brace as it is part of the servo bracket or fuel cell. 3). The shock mounts are not comparable with any shocks that have the one sided knuckle on the top of the shock(ex.: Proline or SSD shocks)

[@dirtberger4533]

That looks so good, Dang 👍👍🏁🏁 Great build!!

[@scalefreakgaming]

Already have my rig pulled apart waiting for my conversion chassis to come in.

[@rccraft5900]

I just bought 2 of these kits,nice chassis but i am having a hell of a time trying to get a scx10 2 deadbolt body on it.

[@arthurjohnson4456]

That's definitely a conversion that I would consider. While you're updating your rig go check out Excalibur Customs. They make a nice dual servo mount. Similar to the one that blue monkey rc used to make for the 10.1.

[@HarleyDesignsInc]

This already comes with a dual servo mount that incorporates a lot more. It wouldn’t be a good idea to use that in place of this.

[@jasonroberts828]

The Ripper front bumper would look great with that Bronco.

[@MotoErgoSum]

That's what I have on my stock SCX10ii chassis. I'm hoping they make one that fits this new chassis. Going to buy another Bronco body since the new post holes don't line up nicely.

[@traxrc]

since the transmission is flipped from the stock chasis, will you have to flip the driveshafts as well so the longer shaft is in the rear.

[@MotoErgoSum]

Any chance you'll make a Ripper bumper that slides into this chassis? I was really hoping I could use mine because it looks great with the Bronco body and gives great clearance compared to the massive plastic bumpers that came with my Jeep Cherokee. If Vanquish makes a bumper set that'll fit the VS4-10 I'll buy.

[@TangoOne]

I will absolutely be converting my SCX10.2 to this chassis! What receiver boxes can be used with this kit? is there a particular one you recommend?

[@jonwarren231]

Great video. Interested in upgrading a lightly used SCX10ii with this chassis kit. Can the VFD transmission kit also be added to this set up..?

[@bobdegood71]

I have watched this video several times and it has inspired me. I have ordered the SCX10 2 build kit and the Vanquish chassis kit. What shocks could you recommend for this build?

[@kts8806]

Cool to take something old and make it new again!!

[@hostinggeek]

Thinking of moving my GCM Cross Canyon build into one of these. Wondering if my Hot Racing transmission, and GCM transfer case would fit. If not, what would I need to swap them out to?

[@cameronjr2427]

Aye man I did this exact thing but I had sum problem with the rear stock 10 2 shocks binding with the shock hoops

[@brianmills3793]

Great video Josh!! Is there going to be a problem with that body and wheel base? Being the shorter 11.8 wheel base body or are you going to shorten the links? Or just not worry about it?

[@teh-floater8839]

I hope they get more stock soon haha 👍

[@emersonlopezg100]

What will be the best rear upper link position for a comp rig

[@josephlameris7097]

Yo, can you do a spec for spec, side by side comparison

[@areadierc2803]

Does the axial body posts fit into the chassis kit shock hoops?

[@noelramos8196]

Can you put the new designed transmission of VS4-10 PRO on this se up?

[@Sully.Sawinski]

What are the tallest tires your can run without running into clearance issues with the sliders?

[@rccraft5900]

I wonder if my jeep jk hardbody will fit this chassis.

[@sumo_shaneomac]

Can that battery tray itself fit into a rtr vs410 chassis?

[@MotoErgoSum]

I have the kit version of the SCX10ii and discovered there’s no pretty way to use the stock skid and mount the transmission so it clears everything. Is there something I’m missing or do I need to buy the RTR transmission kit from Vanquish? No big deal if that’s the case because I’m planning to build up the old chassis for my son to upgrade him from his SCX10 Deadbolt. A parts list would be much appreciated. I run in filthy muddy conditions sometimes so I’d like to protect the spur if possible.

[@MotoErgoSum]

Ended up buying a cheap helical trans on amazon until I have the time and money to throw at building up a complete Vanquish trans. I really wish Axial had used the same bolt pattern for both the kit and RTR.

[@billderas3420]

Great informative video. Makes me wonder if it is better to use the VS4-10 chassis and build up from scratch...As opposed to taking parts from an SCX10-II chassis. Hmmmmmm...

[@HarleyDesignsInc]

Always an option as well, but if you have a car that’s just not as used any longer, sometimes it’s nice to breathe new life into it.

[@billderas3420]

@@HarleyDesignsInc Guess that I need to increase my stable of crawlers...LOL

[@BGnation573]

Also can u use the origin axles on a 10 2

[@benwoodley8158]

Yess, i love your vids :)

[@HarleyDesignsInc]

Thank Ben.

[@RcHobbySteve]

Totally awesome! Will there be a skid available in the future for those of us who prefer the lcg transmission from the kit version 10.2

[@HarleyDesignsInc]

I’ll look into the kit trans, the stock SCX kit skid will bolt in, but the other mounts will be needed.

[@Firewlkre]

what other mounts?

[@bonedigggss]

Call it Gold Member!!!

[@tomandrews5392]

That chassis will make a great scale crawler…..

[@paulmello5115]

Could I use this kit on a vaterra ascender

[@nedithejedi]

What gives it so much more travel? The "wheel well" depth on the frame rails?

[@HarleyDesignsInc]

Yes the clearance of the frame rails and location of the panhard and servo mount.

[@Numb360]

What transmission setup are you using?

[@hanau73]

Will this conversion work with a 1.9 Wraith?

[@strangways56]

Will this chassis work with the umg10?

[@Firewlkre]

Mines already shipped and i have a new unbuilt scx10ii cherokee kit waiting.Thx for getting this info video out like u said u would! Will my trans bolt in and i couldn't tell where u put the reciever?

[@ravensdalerc]

Good question. Trying to convert my 10.2 kit to the chassis kit and unless I’m vastly overlooking something I don’t see how the transmission will mount at all. What did you find out?

[@ravensdalerc]

jo jo Good question. Trying to convert my 10.2 kit to the chassis kit and unless I’m vastly overlooking something I don’t see how the transmission will mount at all. What did you find out?

[@renobob7781]

When will the kit be available? Looks like a good conversion project. 🤠🇺🇸☝️

[@Cooncified]

Its available now!

[@stpbasss3773]

I want to do this to my scx10ii. I have incision links with vanquish brass pivot balls can I swap those directly over?

[@HarleyDesignsInc]

Yes that will swap over. You’ll need to use standard width balls in the skid plate is all.

[@evoone3039]

I just got the chassis kit. I was wondering what is the last bracket? It doesn’t show in the instruction packet.

[@HarleyDesignsInc]

It goes with the parts for the new VFD transmission. Hold onto it for the future.

[@304renegade]

As always, love the video. The chassis upgrade looks nice, and the lower COG would be much appreciated, along with vanquish quality, I am intrigued. The lower COG would certainly help offset some of the issues with portal axles, as you mentioned. If a viewer had an scx10ii they they have spent some time and money on getting set up to their liking (so they don't necessarily want to just sell it and start all over with a trx4) and they wanted portals other than the super nice and high quality, yet cost prohibitive, f9 portals. Would you have any recommendations?

[@HarleyDesignsInc]

I plan to put TRX4 portals under this chassis soon also. You can find take off axles for a pretty decent price.

[@304renegade]

@@HarleyDesignsIncis the offset pumpkin a big hurdle, or will the shafts just play nice? I am kind of astounded that there are no youtube vids covering the swap, or even Gen 8 axles for that matter. (Hopefully the strong hint to make a video about the swap wasn't lost on you...ha!)

[@HarleyDesignsInc]

There will be a little custom work but not much. I hope to have the video up next week.

[@tarui]

what's the name of the transmission?

[@rccvs4355]

Hi Harley, quick question, my SCX10 II raw kit is setup on 12.3" or 313mm, can it be transfer same setup on the VS4-10? Will the body post will be the same position as the original, or I would have to drill out new holes into the body? Thank you great video !!!

[@HarleyDesignsInc]

Most of the body post locations are the same, however Axial also uses several different post style which can vary. If you’re using standard straight posts though, you should be good.

[@rccvs4355]

@@HarleyDesignsInc Oh perfect thank you so much that was my main concern and yes all my post are straight not angle, so I'll be good to go !!!

[@BDcumminsdiesel]

Hey josh I got a question what if you have the scx10ii kit with the kit transmission fit in the vs4-10 chassis

[@BDcumminsdiesel]

Nevermind I just read on amain that it isn’t

[@traxrc]

Does this conversion go the same if you have an SCX10 II Deadbolt with upgraded Incision links?

[@HarleyDesignsInc]

Yup, super simple conversion.

[@traxrc]

@@HarleyDesignsInc Thanks, Awesome Tutorial, definitely getting one myself!

[@greywolfe6805]

Does ucfab sell that cage?

[@billderas3420]

And would the Vanquish chassis converted car still qualify for Axialfest 2019?

[@HarleyDesignsInc]

Yes it will

[@loganoyler9749]

I am looking at buying a crawler. I have never owned one before and looking to get into it but i dont know what kind of crawler to get. Any suggestions?

[@HarleyDesignsInc]

I have videos on all kinds of crawlers on my channel. Check it out and you’ll see my feelings on many of them.

[@adrianvaleanu6405]

Hy, a configuration with curie F9 axles and servo on axle it will be nice.

[@HarleyDesignsInc]

This was made for a chassis mounted servo, so I would stay with that.

[@adrianvaleanu6405]

@@HarleyDesignsInc Thanks. I was worry wih clearance betwen the servo mount on the axle and front brace.

[@ToXvap]

@@adrianvaleanu6405 Hy Josh, it works very well with servo on axle. Dremell always work. :)

[@slzbuildz]

If you want to swap over to wraith axles will the wraith skid plate fit and if so what is the best rock sliders to go with?

[@HarleyDesignsInc]

No, Wraith axles are not an easy fit and will require extensive mods.

[@slzbuildz]

@@HarleyDesignsInc I did watch your vid on wroncho.... will the same mods have to be done on the VS4-10 chassis?

[@NikkiNexo777]

Could you throw wraith axles on this chassis to make a wroncho?

[@HarleyDesignsInc]

Probably could but I have not tried. That’s not as popular as it used to be so I haven’t even thought about it.

[@RcHobbySteve]

Can the enduro parts be swapped over as well?

[@HarleyDesignsInc]

Yes, I did one of those as well

[@israelcardona5170]

So my main concern is is if I buy this chassis will I still be able to put my scale GCM transmission on this chassis? On the axial you had to have a skit skit plate and obviously the mounts were made to fit inside a SCX10 frame rail. But will it work with this vanquish chassis

[@HarleyDesignsInc]

Something like that may not drop in, or would require custom mounts at least.

[@israelcardona5170]

@@HarleyDesignsInc be awesome if you could make a "how to.." on how to put one in. Probably can 3D print a skid and mounts and all them on shapeways. Idk just a thought

[@bluemotion71]

Hey Josh, does the bomber transmission fit on that skidplate ? 🤔

[@HarleyDesignsInc]

No, completely different.

[@souledoutrc8174]

Would the Vanquish shock towers fit on this kit or would we have to use the ones provided from this kit? Also would the transmission housing from the CRC 2017 Jeep fit on this kit?

[@HarleyDesignsInc]

The shock towers in this kit are different. Aluminum shock towers for this will also be available if desired. But the panhard Mount is already aluminum on this so the strength is already very high.

[@HarleyDesignsInc]

Also, yes the 2017 trans will fit

[@souledoutrc8174]

Harley Designs thanks bro really appreciate your feedback and I look forward to putting this kit together and run it on the trails

[@ravensdalerc]

Bummed to find the VP 10.2 front shock towers don’t seem to work with the chassis kit. Am I missing something, or have any suggestions?

[@HarleyDesignsInc]

This chassis is a totally different design so the towers will not work.

[@ravensdalerc]

Harley Designs hey thanks for taking the time to reply. Yep, I am seeing that, and unfortunately the shock towers are the least of my concerns now. I have the 10.2 kit version, so of course my transmission won’t mount/fit on the skid plate.

[@davidhazelden2054]

Hi could u put a pair off motor on axle axles on that chassie or only normall axles ???👍👍🤟🤟

[@HarleyDesignsInc]

Thats a request I've never heard. I'd say it's probably possible depending on the positioning of the servo and motors for clearance. I bet it would be an interesting build.

[@davidhazelden2054]

Harley Designs is it some thing u think ur have a go to c if it’s possible m8 👍👍👍🤟🤟🤟

[@brettskinner5824]

How do you have more travel than that of a scx10ii??

[@HarleyDesignsInc]

Much higher chassis arcs, allowing the axle to travel further upwards where an SCX10 chassis has significant interference issues, especially on the passenger side.

[@camkels6396]

Will this work for the original scx10? Seems to look like it does.

[@HarleyDesignsInc]

This is made for chassis mounted servo so you would have to come up with a panhard Mount for the SCX10-1.

[@lanemullins1915]

How does the chassis allow for more travel with stock shocks?

[@HarleyDesignsInc]

A stock chassis doesn’t allow for full travel specifically on the drag link side. The high clearance design allows for more travel.

[@RedSoxboston]

Hey Josh, I got the Toyota SR5 cab body for my VS4-10 just wondering if the RR10, Yeti interior will work for it ?

[@HarleyDesignsInc]

Absolutely, the RR10 will fit just like the Honcho cab 👍🏻

[@RedSoxboston]

@@HarleyDesignsInc sweet thanks Josh!

[@AngryDavesADULTRC]

Nice looking chassis, but I'm not sure I get the point. Is the SCX10-2 chassis that bad that it needs complete replacement? Can't some small mods stiffen it up if you want? I haven't really heard any complaints about it so I'm confused as to why this exists. Please, enlighten me. -"Angry" Dave

[@HarleyDesignsInc]

Chassis replacement is very common on the SCX line, there are hundreds of options. The SCX chassis is restrictive on performance especially on the front. This is specifically noticeable when trying to get a lower ride height than the very tall stock setting.

[@AngryDavesADULTRC]

Good to know. Always nice to get a logical reply. Just got my first scx, a 10-2 raw builders kit. I look forward to evaluating the performance. Thanks -"Angry" Dave

[@HarleyDesignsInc]

Yeah, I've probably had 100+ SCX10's and the shortcomings of the chassis are apparent after trying to build so many custom trucks.

[@AngryDavesADULTRC]

Good to know. Pity they didn't correct the issues when they cam out with the 2. I guess that's what the aftermarket's for. Thanks -"Angry" Dave

[@donaldellis8116]

Will the TRX 4 lift kit convert to this chassis, and will I run into an issue with the drag link?

[@HarleyDesignsInc]

I'll be building a version with TRX4 axles soon.

[@HarleyDesignsInc]

I would NOT suggest using the lift kit on anything but a mud truck. It’s best to only use it on a TRX4.

[@bradlycruse73]

I’m thinking of doing this conversion, was it worth it after all was swapped out? Or would I be better off just gettin an Element? I’ve got the blazer you have and was wondering if it helped yours out? Thanks any info will be appreciated

[@bradlycruse73]

What I meant was just not building the vs410 and just buying an Element kit instead

[@bradlycruse73]

Are you talking about the hard plastics? I’m going to go look at a Element today and I believe it has the hard plastics installed already. Aren’t they grey instead of black?

[@bradlycruse73]

I get that, what I was trying to get was his opinion if it’s worth getting the vs410 chassis and converting my Scx10.2 or just go ahead and buy the Element. I actually bought the vs410 chassis and I’m buying an Element as well.

[@William-McCueRC]

why did you only hook up 3 links in the front?

[@HarleyDesignsInc]

Because the front suspension is a 3-link with panhard. With a chassis mounted servo you don't want to run a 4-link suspension.

[@diffman75]

I dont sizes of pivot balls. So I'm going to ask will the revo rod ends work with this?

[@HarleyDesignsInc]

Yes these are the same size as Revo rod ends, Axial rod ends are slightly larger which is why we include the proper size balls.

[@diffman75]

Sign me up. Lol can't wait to get one

[@diffman75]

Also did you have to remove the gear guard to put that body on?

[@braddahdussifyoumuss596]

Can all axial scx10 iis do this swap (trail honcho) lol

[@HarleyDesignsInc]

Rear cage can always be the clearance issues, but it’s just minor custom trimming you may have to do.

[@braddahdussifyoumuss596]

Thanks josh🤙🏽🤙🏽

[@OhioGuy82]

Can I use this chassis on my OG SCX10?

[@HarleyDesignsInc]

This is setup for a chassis mounted servo and panhard, so you would need to get a panhard mount for the axle.

[@squeezablemayonnaise8904]

Brother I'll take that body off you if you want! 😂 I want that body so bad but those damn scx10ii are so expensive for what you get. I decided to get a gen 8 and I wonder if it would fit! 🤔

[@HarleyDesignsInc]

I already gave the body to a friend.

[@squeezablemayonnaise8904]

@@HarleyDesignsInc awww man!

[@robhall845]

Hope you bought a case of axle stubs to go with your gen8, you're going to need it

[@ConditionZero76]

@@robhall845 for what? I've owned a gen 8 for 1.5 yrs haven't changed them once?

[@kinslersrccustoms6945]

I liked this video and I am thinking of getting it. Can you do a video of this setup with a Toyota Hilux hard body ? That is what I am running and what I will use the VS4 -10 kit for. I know that you are not a hard body user but this is somthing that alot of us do run. Thank you.

[@HarleyDesignsInc]

Body options are very wide, but most bodies should bolt up without issue.

[@racefreak11]

Can the stock transmission be used?

[@HarleyDesignsInc]

A stock 3-gear can be used.

[@BrokenSpokes_fixed]

Will it work with wraith axles

[@HarleyDesignsInc]

Wraith axles will require custom links just like an SCX10 chassis would. It would also require a panhard.

[@jacobzirkle9153]

Would this chassis be a good swap with an element enduro

[@HarleyDesignsInc]

I have done it to my Enduro and need to finish the install video. It was fairly easy to do.

[@jacobzirkle9153]

Harley Designs do you get the same benefits with travel as you do with the SCX2

[@HarleyDesignsInc]

Yeah, not much different but had to mount the panhard a little different because of their truss design.

[@bonedigggss]

Will vs4-10 axles fit?

[@HarleyDesignsInc]

Haha... yes it was quite literally made for them.

[@Realmrclv]

What will be the benefit of do this?

[@HarleyDesignsInc]

There is a full list on the site but increased suspension travel, aluminum panhard, dual servo mounts, scale fuel cell, double shear shock mounts, more rigid chassis, low COG battery position, etc. Lots of design differences 👍🏻

[@Realmrclv]

Got mine yesterday!

[@JIKGE2]

possible to use it with the honcho?

[@stpbasss3773]

It's a scx10ii so why not

[@JIKGE2]

@@stpbasss3773 because of thé rear cage that sit low betwen thé frame

[@kevinrichisneat]

It doesn’t work. Rear cage hits fuel cell.

[@dirtberger4533]

How long before drive shafts are in stock again?? Thanks oh man that looks great. Dang you keep making me spent money.lol

[@HarleyDesignsInc]

Driveshafts will be up today.

[@BTandKM111]

What shocks will you use for your custom rig?

[@HarleyDesignsInc]

On my recent custom truck on this chassis I used stock front. The rear was all tubing so I welded some on. However otherwise I would have just used the stock ones again.

[@HarleyDesignsInc]

Whoops, I misread. I am still using the Incision 90mm shocks.

[@jacklaferriere6121]

Redcat gen 8 axles