Converting a DT Swiss rear hub from 142 12mm to 135 9mm QR

[@minkyuyeom9539]

OMG this is what I was looking for !! thank you very much. I only need the end caps. I have 350 hub thru Axle !! Thank you again !!

[@JOutterbridge]

I wonder if these end caps will work on any other manufacturers hub

[@PortugueseEvolution]

You are welcomed. These only work with DT Swiss

[@BA-xu3vk]

Thank you so much for sharing this! Information about this part is basically nonexistent otherwise!

[@GatlingJackDE]

Just found the video! Exactly what I was looking for! Thanks a lot for uploading and sharing that adapter kit from DT Swiss!

[@PortugueseEvolution]

You are welcomed

[@stevemanning4320]

Had the same issue as you couldnt find anything. Thank you for making this.

[@gervaciosantos8331]

YOU ARE A LIFE SAVER OMG THANK YOU, i JUST SWAPPED MINE RIGHT NOW

[@PortugueseEvolution]

You are welcome

[@CaptMorgan24]

Thanks so much. Just bought a set of these for my 2004 Cannondale F600

[@tonyg3091]

Thank you! I need to do the reverse-from QR to thru axle, this was mighty helpful

[@GokkunGuru]

Excellent video. The one and only on the Internet.

[@PortugueseEvolution]

Wow, thanks!

[@easer777]

Thanks, also had a hard time to find info, but here it was, thanks a lot....!!!

[@PortugueseEvolution]

You're welcome!

[@aintnobodygottime4dat]

Thanks for making this video👍🏻

[@przemek4853]

Great job!

[@jamespartington7835]

Very helpful - thanks.

[@kennysandhoj]

You are a hero! I have been trying for days to find out if it's even possible! I want to buy a set of entry level DT Swiss wheels but they're all 12x142mm thru axle and i have quick release. I have found conversion kits from DT Swiss themselves for some of their hubs but the the difference in widths is not explained anywhere. Thank you =)

[@PortugueseEvolution]

You are very welcomed!!!

[@petescott8259]

gold, thanks so much for posting

[@IdontNeedHandles]

Thank you Sir!

[@PortugueseEvolution]

You are welcomed

[@Jacob99174]

Dude thanks tons!!

[@PortugueseEvolution]

Glad to help!

[@schwinnmoabowner]

Wondering which endcap goes which side…that single/double „sealing” ring is best way to differ them

[@JetsetJive7]

THANKS !!!! works for Mavic TOO

[@PortugueseEvolution]

You're welcome!

[@francestyrrell6135]

Thanks. Looking to convert my TA to QR rear so I can use my bike on my trainer without paying $65 to Kickr for their adaptor.

[@PortugueseEvolution]

I am glad to help!!!

[@tehptr]

Thanks, helped me a lot

[@cowrevenge]

I wanted to run a 10-42t on a folding bike but could not find a XD driver anywhere. I did find a hub eventually after weeks of searching. Brand is called Koozer if anyone wants to look. Koozer 450 front 5x100/rear 5x130mm QR/120 HD I was going to build some wheels.. but they also offer sets. If it works out maybe ill post a vid of the build.

[@gervaciosantosiii2552]

THANK YOU !!!!!!!!!!!

[@rkirbylancaster3225]

Legend - thanks mate.

[@PortugueseEvolution]

No problem 👍

[@royah6276]

Hello, nice and usefull video, Can you show us when you install your rear hub in bicycle , thanks again. Rogelio.

[@binarumah]

Thanks for sharing buddy👍

[@PortugueseEvolution]

you are welcomed

[@chrisvanbreugel]

Thank you

[@PortugueseEvolution]

You're welcome

[@HarishChouhan]

My hubs on old bike are towards their death and so hard to find hubs for them since my front wheel has 28 spokes and rear 32. My new bike has Bontrager Affinity Disc wheels with thru axle so was just searching for ways to use that wheel on old bike and then I could spend money on buying good wheels for new bike :)

[@nicholasjacobs3862]

This is a good video. Sucks that these tiny little end caps are $50 for each hub though.

[@TM-uo3fz]

Thanks do fulcrum do anything similar

[@FranckLeliepvre]

It's not so easy with the Magic Allroad SL Road+ MY21 modele. You need to remove the axle to insert the dust cover before. Big Sheet !

[@joec5682]

Did you put a 12 speed cassette on there after? I’m wondering if I can put a sram xd on there and run a 12 speed

[@PortugueseEvolution]

You can, But I stuck with a 11 speed.

[@bsn1n-diezjohnkzee116]

Where did you buy your conversion kit?

[@giovannijabajab2869]

Thank so much! I just bought a dt swiss 350 hubset. Did you order the end cap separately?

[@PortugueseEvolution]

Yes I did. Here is the link for the part. www.chainreactioncycles.com/dt-swiss-conversion-kit-12mm-to-qr-rear/rp-prod23858

[@JeanFrancoisDesrosiers]

Thanks!

[@PortugueseEvolution]

You are welcomed

[@Temporalplace]

Can i also switch from 15mm to 12mm axle with adapter ?

[@HarishChouhan]

Hi, Do you think this can be done on the Bontrager Affinity Disc wheelset which has thru axle?

[@PortugueseEvolution]

You will need to replace your hubs.

[@poloornelas6382]

I have an easton hub 142mm 12mm and have been looking for changing out the end caps to a 135mm QR, any help would be great

[@PortugueseEvolution]

I would have to do some digging.

[@spronkin]

Hello. Can I convert in the same way 142 mm thru axle rear hub to solid axle 135 mm?

[@PortugueseEvolution]

Yes, absolutely

[@alias8125]

Can you convert boost hubs to QR too? Or just 100/142 axles. Thanks in advance

[@PortugueseEvolution]

142mm and 148mm, that I have seen on some bikes.

[@julianju91]

Thank you for this. What was the part you got? And where did you get it?

[@PortugueseEvolution]

Hello Julian, here is the link for the part, keep in mind that the 142 mm hub is the best to convert it to 135 mm. You can also find the hub there too. Hope this helps. www.chainreactioncycles.com/dt-swiss-conversion-kit-12mm-to-qr-rear/rp-prod23858

[@bobe922]

Thanks man. I just bought marlin 5 and i was looking a way to upgrade to 1x12 speed. This is solution.

[@mjrmustard88]

Thanks for this! I almost gave up finding a 135mm microspline hub!

[@PortugueseEvolution]

@@mjrmustard88 you are very welcomed!!!

[@PortugueseEvolution]

@@bobe922 You are welcomed

[@jaimearias7218]

Do you know if it fit with a 180 hub? Thanks!!

[@PortugueseEvolution]

yes it dose

[@_MattyG_]

Some product links would be super helpful.

[@PortugueseEvolution]

I have links for where I got the hub and ends.

[@robertn2951]

Filming horizontally is alway better than vertically.

[@tubeularvids]

Can you do it with boost hubs too?

[@PortugueseEvolution]

You can, but it doesn't go that small.

[@poloornelas6382]

Sorry, its a thru axle XD hub

[@nothingintheremeow5739]

Will it work if it on another 142mm12mm hub?

[@PortugueseEvolution]

That is what my hub was

[@matthewgoulamanian5968]

this hub could be used for mountainbiking, the links you have expired

[@PortugueseEvolution]

Yes, they have been hard to get parts for bikes.

[@nikkiljames]

Ive the QR adaptors but fitting them is nigh on impossible. I watched your video multiple times and despite my effort cannot get them to click in place. 😒

[@PortugueseEvolution]

do you have the same hub and adaptors?

[@nikkiljames]

@@PortugueseEvolution Hi, I have the DT Swiss ARC 1100 Dicut DB wheels. Trying to replace the bolt through with the QR adaptors, as recommended by DT Swiss. You make it look so easy but I’m struggling.

[@PortugueseEvolution]

@@nikkiljames It dose take a little force to take apart.

[@nikkiljames]

@@PortugueseEvolution yeah I managed to do that but putting them back together is the problem. Won’t click into place.

[@StiHouse]

Can DT 350 130mm convert to 135mm?

[@PortugueseEvolution]

No it will not make it bigger.

[@CQ825]

Do you have a link for these

[@PortugueseEvolution]

I did, but supply chain issues

[@lexigone]

If the hub is assembled into a wheel, his method won’t work. What I did was that ,through the hole, knocking one side out with a screw. Hit the shoulder with a screw.

[@PortugueseEvolution]

When it is new this works the best. But when it has been on a bike you might have to use something to knock it out.

[@andi4281]

But you need a real 9mm thru axle, not the shi... quick release?

[@PortugueseEvolution]

I needed this because My frame is a quick release, not a through axle.

[@ЛеонМикер]

тут барабан алюминий.?????

[@Assimilator702]

Are the adapters included with the hub?

[@PortugueseEvolution]

They do not come with the hub, you have to buy the separately.

[@ЛеонМикер]

@@PortugueseEvolution друг это в целом выходит дорого.!!!

[@Sfairat0122]

+

[@redapple73]

Dt swiss 350 148mm ta convert to 141mm qr?

[@sx2000]

Thank you.

[@Kris-ho5hr]

Thank you