Converting BCS Two-Wheel Tractor to a New Style Clutch

This video explains the process for swapping out a old-style BCS Two-Wheel Tractor clutch with a set screw to the current style. To reach the BCS America Tech Service department, call 1-855-832-4505.
Service Bulletin 2-5 that is referenced in this video can be found here:
www.bcsamerica...
Find your nearest BCS servicing dealer here:
bcsamerica.com...
Follow BCS America on Instagram:
/ bcs_america
And Facebook:
/ bcsamericallc

[@rbbiefah]

can you immobilize the engine shaft by stuffing a starter rope in the spark plug hole ?

[@BCSAmerica]

Yes, that should work fine.

[@s1914]

Great vid 👍

[@oscarpascual6491]

Hola, como saber cuando el clutch esta fallando y Cúando se debe cambiar?

[@rolandjackson9771]

Thanks please what is the parts number?

[@killytoo]

It seems the criterial point is 4:1/2” Is there a leeway of 1/4” ether side of this

[@BCSAmerica]

Sorry, can you be more specific with your question?

[@trencherguytronco3784]

I have a 722 bcs rototiller i take off the engine to put a new piston rings and i put it back on to the machine but not i can't get the clutch to engage with the pto any help? Plz

[@BCSAmerica]

We'd recommend a local engine shop. There are a lot of things going on here.

[@trencherguytronco3784]

@@BCSAmerica ok thank you

[@trencherguytronco3784]

@@BCSAmerica i got thank you was the fork was pushing the clutch out

[@omcdude64]

I have the 725 model and it's not even listed.

[@BCSAmerica]

The linked Service Bulletin is for tractors built after 1995. Model 725 hasn't been in production since 1994. For tractors built before 1995, you need Service Bulletin 2-4, here: s3.amazonaws.com/bcs-america/manuals/Service_Info_2-4.pdf All of our Service Bulletins can be found on our website: bcsamerica.com/service-information Hope this helps!

[@omcdude64]

@@BCSAmerica, thank you for replying. If I have the new Kohler 9.5 on my 725 does the Service Bulletin 2-4 still apply to me?

[@BCSAmerica]

@@omcdude64 This service bulletin only lists tractors and the engines with which they were originally sold. We did a little research to figure out what you'd need with your tractor: The original clutch on model 725 was rated for up to 9hp. If you're 725 still has the original clutch and you've converted to a 9.5hp Kohler engine, the HD clutch you need is part number 59247573. These are readily available. Give us a call and ask for the service department if you have further questions: 1-800-543-1040. Thanks!

[@omcdude64]

@@BCSAmerica thank you again.

[@klemenbobnic1996]

And why is this cone shi* better than pinion key? We have a lot on problems since new.

[@BCSAmerica]

The taper lock provides a much more secure connection, rather than a single set screw. Set screws can be a real pain to remove and can break.

[@klemenbobnic1996]

And why is there a groove on shaft?

[@tashiangchok3086]

Language hindi.