Learn how to convert simple images to svg in inkscape.
Пікірлер: 94
@robinfowler39436 жыл бұрын
Thank you thank you! I have spent wasted hours doing the exact thing you mentioned by doing them individually!!! If I could I would give you a big hug!! After countless research or videos something to help me I finally found it in your video. Doing exactly what I was looking for and explaining it perfectly how a “normal” person can understand! Thank you again!!!
@cricutmom29786 жыл бұрын
Awww thank you so much! I am so glad I could help You! I too, spent countless hours trying to research, but most videos I watched were wasted minutes of unneeded explaining to where I couldn't grasp what I needed.. so when I learned some thing, I wanted to share in a fast, but paced learning video! I really appreciate the feedback! You don't know how much it means!
@LorraineCastellon-Rowe3 жыл бұрын
OMG! That was way easier than what I do!! I love this tutorial!!! Thank you so very much for all the clear instructions!! 💖🌺🌸🏵🌼💐💖
@nicoletrammell95755 жыл бұрын
Thank you so much. I was thinking it was going to be 10x harder than it actually was. I just started using inkscape to make SVGs, PNGs, PDFs, etc. and I absolutely love the program. You just made my life a lot easier. Thank you!
@lisawhelpley7 жыл бұрын
Thank you so much. Every time I have to change png to svg, I come back and re-learn from your VERY helpful and concise tutorial. Thanks for posting it!
@cricutmom29787 жыл бұрын
As I said, i didn't know alot about inkscape, so I do these videos as i learn about it myself, I have learned you don't have to work within that square! You can actually remove it if it is annoying to you! You can go to ▪file ▪document properties And uncheck the display box towards the bottom of the pop up!
@yvonnedubois71785 жыл бұрын
Cricut maker will not allow my SVG from inkscape into design space although I do same thing as you do ...
@entropysarts58566 жыл бұрын
Great Tutorial! I’ve been dying to do this, I wish I had known how to do this before, the whole process took 10 minutes from downloading Inkscape to uploading in DS. Thank you!!!
@thepreecher87555 жыл бұрын
impressive tut exactly what I wanted to know...to the point and very understandable...THANK YOU!!!
@WEmralddiva4 жыл бұрын
Thank you soooo much for this tutorial. I have such a hard time working this program and you have simplified it for me. You Rock!!!
@cricutmom29784 жыл бұрын
That's awesome to hear! Thank you for the feedback!!!
@jennaog97546 жыл бұрын
oh my gosh the time this saves THANK YOU THANK YOU i had no idea what inkspace even was !!!
@cricutmom29786 жыл бұрын
Jenna Love thank you for watching!
@tamarat.36404 жыл бұрын
This is the BEST tutorial! Thank you!!
@Monkeyz605934 жыл бұрын
Very helpful. Is SVG the only format I can save the image as? Or can I save it as DXF or NCP as well? Thank you 😁
@misseyschnake54385 жыл бұрын
Thank you for adding this!! I'm trying to learn inkscape, super confusing but this video helps alot!!!
@kalisuraki88404 жыл бұрын
Thank you so much....i love to learn more about inkscape from you..!!
@rakcerve5 жыл бұрын
I believe you have simplified many aspects, but I would like to know if there is a way one can cut or change the corners of a photo I am trying to convert to svg. This is the first time I have done this, and I am not technical at all, so you really helped me. the thing is I have to publish the image to a product that happens to be round, and my first trial did not come out as I need. Just tell me if you can help, and thank you very much.
@sootydave14 жыл бұрын
Interesting video, 1 Question, Can these vectors be used with a laser engraver or CNC.?
@cricutmom29784 жыл бұрын
That I'm not 100% sure on, but I dont see why not!
@amandapoole89703 жыл бұрын
Omg that was so easy! I was scared to death! Day made! Thank you!
@dianemamo37172 жыл бұрын
How do you create the initial work rectangle that you put your mandala into? Thank you.
@acadiestudio6 жыл бұрын
Such a good teacher! Thank you so much!
@howtheyfly10606 жыл бұрын
Nice video and helpful instructions!
@andrewgarcia54584 жыл бұрын
Thank you so much for this!!!
@cricutmom29784 жыл бұрын
Thank you for watching! Life has gotten crazy and I've not been able to make any videos recently, but I hope to start back soon!
@BarbaraClayArtisticsoulwithin7 жыл бұрын
This was very helpful. Thank you very much for making this video. I loved it.
@cricutmom29787 жыл бұрын
Barbara Clay thank you! I'm glad it helped!
@100roberthenry6 жыл бұрын
brilliant, thankyou, my old jpg looks great as svg now...
@karenvelasquez23645 жыл бұрын
Thanks a lot!!! very easy to understand you, save my a lot of time!
@michelepace84284 жыл бұрын
thank u sooo much so helpful
@rolfbackstrom33915 жыл бұрын
Hi! Thank you for the presentation! I am looking for a way to enlarge jpg and png images without them becoming blurry. However, I need to keep the colors as well as black and white will not do. I thought the svg format would do the trick but maybe not? I would appreciate your comment, please! All the best Rolf
@toddrichards65205 жыл бұрын
Is SVG used for making patterns just for shirts ect... Is the program expensive
@alfee30286 жыл бұрын
quick question is it possible to change the colour if the individual shape? thanks
@sheilasaicoe79466 жыл бұрын
I followed this and learned so much! BUT, when I go to trace I get some broken lines. The lines are not broke prior. Is there a way to thicken the lines prior to the trace so the lines come out clean??
@maryjohnson60107 жыл бұрын
Thank You so much, you made Inkscape less intimidating.
@cricutmom29787 жыл бұрын
Mary Johnson thank you! This is just beginner, as I am new to Inkscape as Well! I just post as I learn lol!!!
@alisalongnecker38886 жыл бұрын
Thank you, I now understand how to create the sag in Inkscape! Do you have a tutorial using silhouette?
@ynellirosas4 жыл бұрын
How can I make the tracing more accurately? My drawing doesn’t come out like yours
@elfcraftvinylswindon40146 жыл бұрын
Thanks that helpful. How do you make sure it only cuts around the image?
@ecreates8237 жыл бұрын
Thank you so much, for sharing your knowledge.
@jenpalubicki31795 жыл бұрын
Hoping u could help. I thought I followed everything u showed but when I try n bring it into ds it says the uploaded svg contained the following items that are not supported: unsupported image type-import anyway? I did try n import but nothing comes up when I import. Could u plz help w/this. It’s a very basic black n white image
@rhodabailey85756 жыл бұрын
I love your video on this but my problem is my MMouse won't save. Tells me can't save svg. When you "Import" the file do you stsy in "Inkscape" or change it to JPEG? I've been following a lot of videos and images save some don't. Have you come across this?
@heatherlamarca11186 жыл бұрын
Great tutorial! Thank you!
@kimberlymelvin53846 жыл бұрын
Thank you so much! That was very informative!!
@cathysiley48166 жыл бұрын
have you done videos where there are multiple colors to make layers? thanks
@dEViN18875 жыл бұрын
nice video, thank u! just what i needed
@sharonhashemi4 жыл бұрын
Hi so I did all that but my svg image comes in several cut layers on design center , how do I fix that so it’s one image, it’s all black and white
@thenar5 жыл бұрын
Thanks mom. This also works for laser cutting.
@AnnieCreates-hugs7 жыл бұрын
Thank you so much, think I might try Inkscape now !
@cricutmom29787 жыл бұрын
Ann Winn yay!! I am new to it as well, I make the videos as I learn how and tips and tricks! I hope to be posting more very soon!
@cindyydnic44206 жыл бұрын
Love this thank you so much!
@cricutmom29786 жыл бұрын
cindy ydnic thank you for watching!
@scottridings60086 жыл бұрын
Thank you so much for sharing this!
@jayeshbhandari14906 жыл бұрын
After the first save .... do we need to do that upload thing? If yes then what is the link of that site?
@wastery91137 жыл бұрын
OK.. I have another question- Is there a way that I can save the image from cricut to my desktop?
@cricutmom29787 жыл бұрын
Wastery unfortunately not from design space. You can add words to an image or something like that and save it from inkscape.
@cindyborgen54806 жыл бұрын
Yes, I used the snipping tool on your pc. Do a search for it. Very easy to use.
@ashleynichole65876 жыл бұрын
I don’t know if I have the right ink space 🤦🏽♀️
@curtisgleaves97266 жыл бұрын
Can I use the exact same procedure to change png tshirt images, I legally possess, to svg for commercial use?
@marilynreno75106 жыл бұрын
Yes.
@Vm_khilona5 жыл бұрын
useful for me .....thank you so match
@Rid00714 жыл бұрын
mam how do i get those layer from the image that u converted to svg?
@Mrjseaton106 жыл бұрын
Question by doing this to any image it will make it vector?
@marilynreno75106 жыл бұрын
Yes
@heatherpierce78557 жыл бұрын
hello I am very new at ink scape I have watched your video a few times now, I do all the steps everything is good until i get to design space i upload the image still good until it goes in ds instead of having one layer like how its shows in the video with one layer , I have the multiple layers what am i doing wrong i hope this makes sense to you I am lost please help !!
@cricutmom29787 жыл бұрын
Heather Pierce may I ask what type of image are you trying to convert? Is it color or just simple black and white?
@francostellini10823 жыл бұрын
....... GOOD GOOD !!!!! LIKE !!!!!
@nhawthorn40376 жыл бұрын
Is inkscape only for cricket I have a cameo and I font know what I'm doing
@marilynreno75106 жыл бұрын
No, it's not.
@neilchristiansen11235 жыл бұрын
Thanks very helpful
@piensaen10085 жыл бұрын
I like it.
@christiekasteler61184 жыл бұрын
How do you remove text in Inkscape?
@jfrench7076 жыл бұрын
New subscriber because I don’t speak Inkscape, 😂
@heatherpierce78557 жыл бұрын
It was a black n white I did get it to work some of the time but I am still having issues some do one layer and some do multiple layers like I said I am new at this program I did try a color one and it didn’t work right at all I know in the video it talks about slicing but the button does come up to use just the contour button
@cricutmom29787 жыл бұрын
Heather Pierce I have also learned you don't have to have your work within that square... you can actually also remove it if you like! I'm not sure why there would be several layers if it was just black and white.. a color one will have several layers.
@SuperParty19844 жыл бұрын
Okay, I'm new what is ink space?
@cathyfannin5 жыл бұрын
Thank You!!
@BahBahTheSheep5 жыл бұрын
nice
@anhduong80316 жыл бұрын
I love you... this saves my miserable life
@janesse15797 жыл бұрын
Thanks a bunch
@cricutmom29787 жыл бұрын
thanks for watching.
@_dinesh5 жыл бұрын
Great video. But for heaven sake use a screen record (sharex its completely free) :) .
@janinna74806 жыл бұрын
Thank you. how much is inkscape?
@cricutmom29786 жыл бұрын
Inkscape is a free program! You can Google inkscape and it will pull it up to download for you! Good luck!
@dianasanchez96055 жыл бұрын
How do you picture into an svg?
@whitleehueston11544 жыл бұрын
Didn’t work for me said file not supported once i tried to open it
@edmike37424 жыл бұрын
Great content but if you had used Camtasia and a good microphone, it would look much more professional.
@111scone6 жыл бұрын
Thank you
@cricutmom29786 жыл бұрын
S cone you're welcome! Thanks for watching!
@sharon945035 жыл бұрын
Nice. I would not want to try and weed that...and definitely not on Cricut Permanent vinyl!
@marianoiboonsook41395 жыл бұрын
Save as what?
@coler1545 жыл бұрын
SaVaGe
@digiteacher39056 жыл бұрын
thank you so much,for sharing your knowledge, my name agung from indonesia ,What ask with Whatsapp your?