Converting PVC pipes to square plastic pipes is very simple | Pvc Pipe Craft Ideas

[@g.f.beurling4474]

I've been a tradesman as well as a hobbyist most of my life, and have used torches and heat guns to soften and shape PVC and other materials, but have never thought of this. Very creative!

[@pinikashimogili1406]

... 001

[@gatosimple2354]

Se puede construir cajas de alcantarillado y evitar el salitre en las paredes de las casas.

[@alex140666]

Cutting a 2x4 diagonally to make a taper and insert from both end would probably make it way easier, if you don't mind sacrificing a 2x4.

[@abbnormalabbze8172]

ลลลลลล

[@reyvrexquestorreyes404]

@@abbnormalabbze8172 nice

[@joseinacionaspolini5849]

​@@abbnormalabbze8172 I

[@joshuaatkins5197]

You read my mind

[@ssfinca]

You might round over the ends of the boards so they go in easier (2:45). That way the corners don't bind while being hammered in. Also, using 2 wedges pounded in from each end (like when setting a door frame) would put flat outward pressure on the tube (4:00). That way you wouldn't get the one over-stretched end you cut off (9:45). Just a suggestion...

[@seanmcaleavy2369]

Awesome suggestions!

[@larrywarolin7215]

The same people aren't forced to be around you all the time are they? I'm guessing no, you're still alive.

[@Swaggerlot]

Great ideas, you should make a KZbin video.

[@freewaybaby]

I was trying to enlarge a 2 1/2 inch round piece of PVC last night with a heat gun and got it to the point of bubbling with heat and it didn’t move as much as yours have. I’m impressed to see how far they actually can be manipulated. Thanks for the video!

[@internettroll7604]

If you want the heated pvc to set faster once it is in the shape you want, keep a spray bottle of water nearby and spray the pvc with water. It will quickly set and harden the pvc.

[@bradgallo7158]

Fast way to evenly heat the pipe is to place in a cardboard box slightly larger that pipe with about 2 inches of clearance around to make a oven. Heat from gun is then spread evenly.

[@orbsphere-]

OK my 2 cents on squaring the tube. After heating insert 2 boards then insert and drive in 3rd board between 1st two. That eliminates board digging into wall of tube itself

[@Mavrik9000]

Cool idea! A few tips of mine and some from other comments: 1. For square/rectangular boards as shown in the video, sand the boards smooth and round the corners at the ends. 2. Make large triangular wedges and insert them from both ends. 3. Safety: 9:55 Never use a sled with rear blade exposure. Add a solid or top-hinged guard first. 4. Safety: 11:15 Never lift a cut item from a moving saw blade. Unless you like things flung at your face at high speeds.

[@JORGESAEZROJAS]

Muchas gracias maestro me resolvió un gran problema con sus ideas ,,gracias

[@jafinch78]

I've done similar to save money on PVC pipe couplings and to interface to downspouts. Amazing when you get to the larger size diameter pipes how expensive the PVC couplers can be and really... to interface the same diameter pipe, you just nee to have a heat gun and do like you're doing, though with a cleaned slightly rounded ended... if even that... same diameter pipe to make bell ends. Really saves some money when you're at the 4" or definitely 6" or larger diameter pipe coupling expense and you need a few.

[@mpbc48]

Clever idea. What really caught my attention is the lack of safety features. No riving knife and I gasped when I saw the saw blade come through the sled where your hands are.

[@groundskeeper5292]

Clever. Made a couple of PVC knife sheaths but never a box. I'll definitely try this sometime!

[@sto2779]

Nice idea! Like how you can use it as for a DIY electronics box.

[@arduinomaquinas]

5.6K Like full 👏👏👏

[@wgenfair]

Nice idea, for sure finding the inner circle area of the pipe and some pieces of wood same area.....time and patience.

[@pinkerbot]

Nah - just mathematics 😉 (area of circle = πr²)

[@vietnamnguyen9843]

Thanks for your videos.

[@JoeGator23]

10:34 All I see is that spinning saw blade and your hand... add a guard/shelf that covers it for the whole cut. No reason to risk it... Thanks for the cool video, I actually learned something today!

[@robr.8350]

Same here

[@barnes29510]

PVC stays hot for a pretty good time aye? That's cool

[@MJ-iy4fb]

Great video. I was wondering about this a year ago. Just need to make 4' pieces and couplings.

[@danzamini4513]

Good idea 👍 But to make it easier: 1. Take a board that is 1-2 cm larger in width than the size you want. 2. saw it so in length so that you get 2 triangles. One side of the triangle should be 90 degrees at an angle. On top of a triangle or both should be 1-2 cm thick to be able to hit (back) on top with a hammer. 3. the length should be 5 - 10 cm longer. 4. lay the top of the triangles against each other in PVC and press them in. 5. good luck! 👍

[@alfadog67]

NICE! Like 2 shims, one in each end of the pipe!

[@moonolyth]

I was thinking this is cool, then you mentioned for an electronics box and that got me quick...will do !!!

[@DireWolfForge]

I would make a mount for that heat gun and keep it blowing on the assembly while you work with the forms. And like others have said, use wedges to make your job easier. Nice video though. Thank you for sharing

[@jprevard]

Cool idea, especially the end showing the application.

[@cackleberryfarm4598]

AWESOME!

[@mnasir4936]

Good good

[@salvadorceninza1271]

Excelente idea

[@bruceanderson7762]

Huh...wouldn't have thunk...thanks for the demo.

[@anthonyrespass3090]

well done

[@drsamuelk]

Its a great way to make an intake snorkel for an SUV.

[@maldoom2744]

Large folding wedges must make the process much easier

[@mightyporky]

Lose the rubber hammer, any wooden mallet or even a shop hammer will provide faster and easier results. I used a similar remedy to connect dust collection to multiple tools.

[@apollorobb]

You're a Thermoplastics wizard lol

[@fx1c333]

what a great idea. Although I'd slightly put a bevel on the edges of the timber to allow it to slide into place better , but that's just me. Grand job.

[@Reman1975]

I was thinking that he needs to rip a couple of those boards into very long wedges, so he can slide them in easily 90% of the way before finally stretching the tube to final size in the last 10%.

[@jamesmaina9013]

Good job

[@miketee2444]

I have heated and squared PVC to use as fountains on a swimming pool. These are usually hidden in a rock or tile wall so spending several hundred on a premade one seemed silly when you can get the same effect by using a Dremel and heating the pipe.

[@ET2carbon]

Elaborate more please I'm interested

[@PhG1961]

As always... great ingenuity and craftmansship !

[@pakchandrachannel1598]

Wow wow is the best, good idea

[@bunker2647]

Complimenti e proprio una bella idea!!!👏👏👏👍🏼

[@lxoxrxexnx]

This is a very good idea. It is also a good thing that we can fast forward through a video to bypass the unnecessarily long parts with no information.i

[@Yhrim70]

made some sheaths for saws and such out of PVC pipe. Hadn't thought about being able to make a box out of pipe though. I do use PVC boxes at times for projects, and they are getting expensive these days, especially for larger ones. Really Good Video, will have to remember. New Sub

[@beakittelscherz5419]

Hi there! good project. If you use big wooden wedges instead of squares, the process will be way easier... . Thanks for showing!

[@garymucher4082]

Interesting concept. You could make the initial box larger and than cut off some for the ends. Than the entire box would be the PVC pipe. Just and idea... Thumbs Up!

[@timfoster5043]

Excellent! I've always wondered about something like this. I wonder if it would be easier to have the top board be 3 wedges: 2 coming in from the front and 1 coming in from the back. Tap the rear wedge in, thereby forcing the 2 front wedges to separate, with the 3 wedges combined forming the final rectangle for the top. I might have to try that.

[@thisisyourcaptainspeaking2259]

Clever! I wonder if an oven can also be used for the heat source.

[@wasanthawimaladharm]

Put few min in boiling water the put the molding wood is the best method for quality pvc box

[@HandmadeCreativeChannel]

I'il try it, maybe I'il do a video 👍🍀

[@cesarp4p]

Buena idea. Interesante trabajo con los distintos tamaños de las maderas. Gracias.

[@davidwillard7334]

I Wouldn't like to Leave ! These ! Pipes ! Outside ! In Summer !

[@johnnyz7752]

Nice job, BUT, You really should put a block of wood on the outside of your sled where the blade comes through so you don’t cut your thumb off.

[@pikifrino]

THANK YOU

[@HandmadeCreativeChannel]

You're welcome 👌

[@DaymeEdna]

I like the end-use of the grey pipe. Very clever.

[@HandmadeCreativeChannel]

That's the point of making the box... Easy, beautiful, sustainable and saves time and money.

[@Tcb997]

Just make a wooden scissor jack and expand it while heating. This will save time and effort.

[@gatosimple2354]

Quizás tenga una aplicación para construir una caja de alcantarillado para desagüe en vez de concreto o ya hecho , la ventaja de una caja de plástico es que no permite fuga de agua de desagüe y duran muy bien ( evita filtraciones en bases de las paredes ocasionando salitre), buen idea Edo de transformar tuberías en secciones cuadradas o rectangulares.

[@bernicegayle5041]

Very interesting I am going to try it

[@ricknenemalo9595]

Square? Looks rectangular to me. Am I the only one that doesn't see square but instead rectangles?

[@dizzydinonysius]

This process can be simplified considerably. If you cut two boards to equal the size you want the tube, then tapering one end of each like a wedge, they can be pointed into the tube opposing each other and pushed together. You could even just take one block and cut it lengthwise, making two wedges for the same result. As they are pushed together, the tube will form to the shape of the wood.

[@AutodidactEngineer]

Is it possible to get PVC in ready made sheets and or different thicknesses/colors?

[@videostarish]

Nice. Maybe a pair of long folding wedges would be better...? plus a box of some kind, to protect your hands, as the blade pops through the end of the cut...?

[@jamesm.8392]

PVC should be made and sold to the public in flat sheet form. PVC glues up so well and consumers could make a million different things they cannot make when starting with round pvc pipe.

[@garylawrence7547]

That’s not plumbing pipe. It’s electrical conduit available at home center. Neat idea.

[@HandmadeCreativeChannel]

This is diy idea, not buy idea....

[@marcothehammer]

@@HandmadeCreativeChannel it’s just a great idea!

[@HandmadeCreativeChannel]

@@marcothehammer Thank you, my friend, I appreciate it! 👌

[@davidwillard7334]

Where did you buy it ! Then !??

[@carlosdavila4164]

yo tome 2 trozos de madera y les adate 2 tornillos en los extremos luego en la estufa los caliento y les doy rosca de manera gradual y listo saludos desde Colombia

[@bloop3460]

Feel like we hv very different ideas about whats simple....

[@wekapeka3493]

Start a wedge from each end just a little and leave the pipe to cool, the wedges will come out easy and make it easier to remove the rest of the boards.

[@wallstreet497]

Fantastic 😊

[@AgungBerkreasi]

Good

[@CanalulDeScurgere]

very simple :)))

[@catanaj8945]

Well done , try now to boil them in water 😉👍

[@santopino2546]

I've already purchased over 50 boxes in the past, you can find them in all shapes and sizes, and are quite cheap. I would only attempt this solution if I wanted a box with a inclined surface that's not available to purchase online.

[@GitXxxd]

bloddy brillian!! :D

[@GarryHeard]

PVC is great stuff to work with. I will quite likely try this out. On a safety note make sure that you do this in a really well ventilated area. If you smell any plastic when heating or cutting it is seriously bad for you. PVC fumes are highly toxic and may cause long term effects.

[@HandmadeCreativeChannel]

Toxic gases from plastic come out when you burn the plastic. In this case, we're just heating up. "do not overheat" Thanks for the comment 👌

[@GarryHeard]

@@HandmadeCreativeChannel that's not 100% true. Burning is very bad, but warming and cutting also emits gas and particles. A long time ago I had to drill 15784 3/4" holes in PVC by hand. We had to take a lot of ventilation, filtering, and tooling into consideration. It's not always easy, but it's well worth the effort. Same thing with 3D printing. Lots of nano particles are emitted. Some are very toxic, some not so much, but I don't think we've had enough time for long-term studies yet.

[@HandmadeCreativeChannel]

@@GarryHeard Again, toxic gases come out when the plastic is burned. When you feel a scent from heating does not mean you swallow toxic gas. New plastics are made to be recycled. In order to be successfully recycled, they are designed to withstand a higher temperature so that they can Easy to change shape without burning and emitting gases.

[@andrestorrado2005]

Very simple 💀💀

[@GPDIY]

Amazing! Thanks for sharing!

[@Atelierul29]

The title should be "How to make electronic projects boxes out of PVC pipes"

[@pdanayal]

Great man . I like it dood.

[@The_Jomonge]

Netflix: are you still watching? Someone's daughter: 2:38

[@bob02130]

Your crosscut at 11:38 is not safe. You risk pinching and kickback of the piece a against the fence. Also add a block of wood to the back side of your sled to shield yourself from the blade. But that said, I like the basic idea and would be interested in other uses for square PVC

[@HandmadeCreativeChannel]

Yes, I know so. I'il add a wooden block

[@kellyvcraig]

@@HandmadeCreativeChannel, yep, that's the only reason I jumped to the comments section - to suggest that.

[@JoeGator23]

10:28 Put a guard on the back of the fence before you regret it for forever... please. This is hard to watch and unsafe in that configuration. Cool video otherwise.

[@jacqdanieles]

😬

[@seanbuford987]

Use hot sand instead. It's more safe, and it's faster.

[@DannoTull]

I would suggest next time you want to melt pipe use a propane torch like used for burning weeds, its faster but you gotta careful not to scorch the plastic.

[@HandmadeCreativeChannel]

That's not a good idea. When burning with a burner, it is possible to release toxic gases. With a hot air gun, there's no such danger.

[@berniemiller1217]

Great...now do a 20 ft section

[@virendersingh6027]

बहुत बढ़िया। मैं acrylic शीट 2mm के 6 छोटे बॉक्स बनवाना चाहता हूँ। जिनके corner थोड़े से गोल हों और जब उस box को बंद करे तो चारों कार्नर में एक screw लगा हो। क्या आप बना सकते हो।

[@sureyyaak5215]

Thank you. If you cut the wood's first corner with a smooth angle I think can insert the pipe without demage the interior surface. Best wishes.

[@HandmadeCreativeChannel]

I show the bes easy way my friend. Thaks, for your comment 👌

[@sddiymakeitworthit7512]

Really awesome and useful idea 💡 👍

[@Dancing_Alone_wRentals]

Wait wait.....a round peg in a square hole? Sign me up.

[@Brown_Buffalo]

Should’ve rounded off the end of the boards so it’s easier to push through the other side.

[@codetech5598]

I'm pretty sure you could just put the pipe into a tub of hot water and it will soften uniformly.

[@judygarrett9193]

Can you use a hair dryer to heat the and shape the tube?

[@sevanson1]

interesting video, however they do make leather gloves for such events. 🙂

[@Tensquaremetreworkshop]

Can I suggest that you put a cover over the back of your sled, so the blade does not come out close to your hands. And you should always use a riving knife...

[@robertgasia]

Very simpele he said.

[@mikewelch3903]

YOUR TABLE SAW SLED NEEDS A SAFETY BLOCK ON THE BACK SIDE OF THE FENCE!!!😮😮😮😮😮

[@rtoguidver3651]

You started w/ two small boatds, why didn't you use a third board the right size to expand the joint or at least round over the 2x4 so it slides in easier ???

[@AkramBenAissi]

Any idea on how to do this for long pipes like 3 or 4meters ?

[@bernardtruchet]

l'idée est bonne, mais je pense qu'au préalable il faut soigneusement huiler ou graisser les pièces de bois sinon on risque de tout "bouziller" au démontage

[@miltonfriedman2325]

Before driving round the leading edge piece., maybe.

[@rogerwhiting9310]

I thought you were going to make a square dust vac system for the shop. I love that idea...would need to make 10 foot square pipe and connectors...anf round to square adapters for the ends.

[@arthurwagar6224]

Use square gutter down pipe.

[@rogermccaslin5963]

Why would you make square pipes for a vac system? Is there some advantage over just using the round pipe as is?

[@Tensquaremetreworkshop]

@@rogermccaslin5963 No- it is actually worse in almost every possible way. From poorer flow to thicker wall requirements. The optimum is maximum cross section and minimum wall surface- i.e. a round tube.

[@rogerwhiting9310]

Relax ladies...its an idea.

[@bunker2647]

👏👏👏👏👏👍👍

[@petegarnett7731]

You could just buy a square pipe when you want one. Then someone will do an article on how to make them round.

[@pierr57]

Be careful once chapped the PVC becomes break

[@jafinch78]

Someone made a comment below regarding using a mold and caps on the ends with a coupler and compressed air. Made me wonder about using a pressure washer sort of like pressure testing compressed air or other tanks using. Guessing filling with hot water would aid in the method and using some sort of relief valve on the opposite end.

[@romulopartoza5598]

Does the applied heat will not affect the texture of pvc pipe? Just asking! .......

[@lettuce001]

Does heating the pvc pipe give off toxic fumes?

[@HandmadeCreativeChannel]

When you heat up to soften, there's no toxic gases or smoke. It's only when you burn the plastic that smoke and toxic gas come out. You can safely treat with a hot air pistol indoors. Thanks for your comment!

[@capiberra4118]

Is this method practical for long lengths of pipe?