7 Ways to Make Stuff from Recycled Plastic | From Tin Cans to Wazer Waterjet cutting!

[@lihtan]

Timestamps: 0:22 - Method 1 - tin can and heatgun 2:07 - Method 2 - pannini press with silicone baking sheet and cookie cutters 3:52 - Method 3 - wooden moulds with hydraulic press 6:00 - Method 4 - sheet moulds with hydraulic press 7:29 - Squarespace promo 8:22 - Method 5 - CNC machining 10:08 - Method 6 - injection moulding 13:30 - Method 7 - extrusion 14:55 - Outro and thank you 15:55 - Christmas sweater

[@koutaconnor9453]

Would love to see a sword or shield mold from recycled plastic.

[@frosty-tg1me]

What do you put the Panini press to to melt the plastic for the cookie cutters?

[@happysunnyrain1531]

You guys are great! 😃👍

[@nonyabusiness9747]

Hey yall saved the best for last but didn't go into enough detail on your massive plastic melter injector maker thing. Could you do a follow up vid showing it in action?

[@greenspiraldragon]

Always make sure your in a well ventilated area, plastic gives off toxic fumes when heated. Always keep a fire extinguisher nearby as plastic can catch fire if the flash point is exceeded.

[@amydavis4945]

Thank you so much for showing us the first couple of "inexpensive" methods for those of us that are interested in making stuff from recycled plastic, but don't have thousands of dollars worth of machinery (or the skills to use them). You guys are amazing and very appreciated!

[@danielDayne-hn3nm]

This is the type of content, in which the language is not a barrier, because it is practical, simple, didactic and ingenious. Thank you guys for the content you share, which is great, and thank you for contributing your knowledge to this entire community.

[@aicram62]

Love that you're catching the flyaway pieces. Treat Plastic like Asbestos.

[@deafsetter]

Love to see the low budget "home" DIY recycling. That is something I can actually do/make.

[@BrothersMake]

Absolutely! Thanks for watching :)

[@ChandanaRanasinghe]

How.. 😐

[@strawberry_punch_art]

@@ChandanaRanasinghe *whispers* panini

[@jerrykovis5417]

Uh, the tools used in this aren’t really low budget

[@MaryAnnNytowl]

@@jerrykovis5417 uh, yeah, they are. Everything except the very last one ate verg low-budget, with a little luck. Find a used toaster oven, a used panini press, and buy a heat gun and a few silicone baking sheets, used if possible, too. Aside from that, there's nothing you can't just do by hand. You don't HAVE to have a router table or a plane, and that bottle jack press is DEAD simple to make, LOL!

[@baybabe95]

I’ve been using the cookie cutter method at home to make jewelry, and it works great! I use a Dremel tool to add small holes for jewelry fixings, and I squish the sheet with some heavy books after I cut through it with the cookie cutters.

[@BrothersMake]

That’s so cool!

[@eugenetswong]

Sasha, thank you for sharing your experiences with us.

[@brantgoose]

Can you please let me know what press you use? I've been looking for one in thrift shops. But now I might try to get one on eBay or Amazon.

[@eugenetswong]

@@brantgoose You are asking the brothers, right? They created a video showing us how they made it themselves. They used a car jack, if I recall correctly.

[@hawkeyescoffee6399]

@@eugenetswong I think Brant was talking about the panini press.

[@shumailriaz9204]

Wow, that bench is a great idea, how cool to collect all the waste plastics from a beach and take it back in the shape of a bench

[@malaineeward5249]

I was thinking of making some beach toy molds like buckets and shovels 😄

[@moejotuber]

Found you guys on a random surfing session. YOU DA MAN , uh MEN !!!!!! Awesome. And I thought I was doing good by reusing sandwich bags, milk bags and plastic wrap. During the pandemic i started making sourdough bread. Made 376 loaves of bread using the same piece of plastic wrap to cover the proofing bowl. Used the same 2 resealable plastic storage bags to keep the loaves fresh. I like to think this has saved a lot of seabirds, turtles and fish. They too often fatally see floating plastic bags and film as a jellyfish meal. The milk bags are resealable with a homemade hotwire.

[@ItsLaurenE]

I still marvel at how far you've come with your channel, your workshop, and endless creativity! Just watched your plastic bag wallet episode, i was into making stronger reusable bags with them using the same ironing method some ten years back. This was also when my kids were younger and drinking capris sun and i really loved making juice pouch wallets. * I find recently as i build my stash of hdpe plastics so many bottle caps don't say what type of plastic it is which makes things complicated. I'm in the US , i did find a brand of bottled water made with recycled materials, is recyclable and caps are hdpe! YAY 🙂 For now I've used cut bottles and plastic bags as fillers for other crafts I enjoy.

[@jonnaborosky8836]

I can't find a word that's good enough to describe how much I love this channel...!!!!!

[@Cybertruck1000]

Had a bit of a go with melting and shaping a few years ago. A lot of stores have plastic wrap put over their delivered pallets. It's easy to come by and melts really well and is incredibly hard, worth giving that a go. The whole idea is interesting and I guess you could make some small scale items or art. It looks pretty prohibitive considering the cost of electricity. The bench, like I say interesting but it would be useful to give a breakdown of all costs to produce it.

[@Eduardo_Espinoza]

Good eye at pointing out the electric cost! Heat especially is costly for electric appliances.

[@1chumley1]

What if you used a solar collector dish to heat it?

[@Apostate_ofmind]

@@1chumley1 unreliable, tricky, not very precise, and it risks burning the plastic instead of melting it

[@peterpan4038]

@@Eduardo_Espinoza Yes, electricity isn't cheap in most places. But plastic sheets aren't cheap either, unless we are talking about super thin stuff like cling film. The shown methods already save a ton of money if you actually intent to DIY something out of plastic. With the added benefit of actually re-using old plastic garbage. Just don't expect the absolute maximum material quality, but that's barely an issue at all for most puposes.

[@balloney2175]

@@1chumley1 Perfect suggestion.

[@zitafatima3941]

You are Great generation that help me to understand plastics recycling in the simply way. Thank you. Go on brothers

[@E-hab]

The last one is the best because it recycles the largest amount and is the most useful.

[@macelius]

I love the idea of making lasting things, like the stool top, out of disposable bottle caps etc.

[@M1N43]

Thank you for doing this guys. Honestly love that I just found this channel and learned about these recycling techniques that the two of you are using to clean the planet. We need more people like you!

[@MaxGiganteum]

"...recycling techniques that the two of you are using to clean the planet...". If we as humans were actually smart, we wouldn't be producing all the plastic that we do. Oh, how... oh, how..., oh how... did we ever get along without plastic? We got along just fine. We should go back to some of those ways and save ourselves the trouble. Not polluting the planet in the first place negates the need to clean it up. Perhaps we should adopt that ideal and change our ways. 🤔 👍🏻 - Max Giganteum

[@malaythakkar8772]

@@M1N43probably a scam

[@meetv7700]

I always wondered how strong that recycled bench was, experiencing zero flex while holding 2 person load without any support in middle section. I love your videos and I hope more people start recycling.

[@unitedwestanddividedwefall2073]

At 1 time I was recycling but when aluminum got too cheap to sell I was done with saving cans

[@maxx23AK]

@@unitedwestanddividedwefall2073 😔

[@MaryAnnNytowl]

@@unitedwestanddividedwefall2073 what the _~bleeping bleepety bleep~_? It's not about the money as much as keeping that shyt OUT of the landfills. I don't get paid a solitary penny for recycling glass, for example, but I damned well DO, because I care about what kind of planet our grandkids and great grandchildren will have to live on. Do YOU want to live on top of a landfill, a figurative ticking time bomb, with methane leaks that can catch fire, toxic chemicals that can leach into your drinking water, and the like? THAT is why recycling is important. I mean, for crying out loud, find someone that will pick up your bin of cans every so often! There's a ton of folks out there that would do so. It's incredibly sad that you only do something if it pays YOU. 😔

[@JohanlastZa]

I am more concerned about the heat the plastic stores....which will be transferred to your umm behind when you sit on it.

[@Eduardo_Espinoza]

@unitedwestanddividedwefall2073 Will u be making a machine gun out of those soda cans?

[@aminakishk6571]

That melted pieces looks just like the earlier bowls my Mom bought when plastic first came out, back in the 1950s !

[@FuriousAquarian]

I'm really inspired by you guys and my mind is exploding with ideas already. I'm already a scrapper by nature. I was wondering if you'd share how to deal with the piles of things that were going to be trash or might be something else. The potential materials. How you store them, how you decide what is worth the effort and space to keep and what you go ahead and dispose of (recycle or throw away). How did you handle that as you've grown? As an aspiring maker I have a hard time keeping my little space from being overrun and ending up turning into a hoarder with no hope of finding anything and no room to begin a project even if the overwhelm of the chaos didn't discourage me.

[@justklampfing1140]

story of my life :D Best tip i have for saving space: get rid of air. air takes up valueable space. if you collect bottle caps, cut them up. if you have lots of scrap wood, glue them together and make new sheets or blocks, disassemble cardboard boxes. use your ceiling to store thin materials. also in general: don't keep ressouces laying around for too long- do something with them before they do something with you

[@stevenmccrickard1401]

Recent sub, I had no idea it was so "easy" to reshape plastic into new products, thanks for the content.

[@BrothersMake]

Glad it was helpful!

[@patriciagraham4786]

I am so glad I stumbled upon your video. I've been saving water bottle lids for some time, but didn't really know what to do with them. So, I threw a bunch out (gasp!!!). Now, I will start saving again and search for a thrifted panini press. My mind's wheels are turning now. Thank you.

[@1pcfred]

The lids are low density polyethylene. They're kinda crappy. I'm not sure why they use LDPE to make lids with. The bottles themselves are HDPE. If they're not PET.

[@davidbwa]

Soup can method would probably be easier if you didn't use a pull top can (which has a ridge). A standard can opened with one of those no sharp can openers gives a nice smooth surface at the lip

[@MaryAnnNytowl]

I just love what you do, and while watching this, and with a teensy hint of an idea from another comment here, I think I may do a bit of experimenting with interlocking puzzle piece shapes. I think it would be really cool to put them together for a tabletop or countertop, with a nice coat of epoxy over the top! (If anyone copies this idea and makes any money from it, I want a cut, LOL!)

[@tobypainter9493]

I wanna be like you guys when I grow up

[@lchristoffer]

Wow! I love this channel - I found you by accident. And I’m glad I did - I’m fascinated by the stuff you do and I love learning about new machinery, etc available to make stuff. I have been a word worker for years (among other things) and I only wish I could get a 3d builder. In any case, I’ve subscribed! Thanks so much

[@Mozes8]

Love y'all work keep helping turn plastic into better ideas.

[@BrothersMake]

Thank you!

[@jgoldwhite]

Great demo and insight on what appears to be a smartly designed improvement/upgrade for the weakest tonal link in the Fender offset model wiggle-bar proposition. I'm quite impressed with how much better the bridge helped your guitar transmit mid to low frequency information, and seemed to add overall to resonance and note duration.

[@joepeanut6827]

UM WRONG Video, are you lost??

[@joyousjoy4ever]

These are really gr8 ideas! I’ve been researching ways to make small items cheaper bc resin is so expensive! I’m a newbie at creating to make some extra cash on the side Thank you, this was very helpful! 😊❤

[@jonathanyoung5780]

Absolutely brilliant and so glad to see so many ways to reuse plastic. Hope your business grows by leaps and bounds 🙂👍

[@crisc9280]

This is why when local municipalities say that they can only recycle certain types of plastic, I don't understand what their excuse is. You just showed how it's done Excellent video

[@wafflebeaver]

Merry Christmas guys. It’s like a summary of a bunch of your methods. Very nicely packaged!

[@BrothersMake]

Glad you liked it :)

[@BiscuitWaite]

You could also use your extrusion method to mass produce interlocking bricks. I've toyed with the idea after reading an article about a company doing just that and thought it would make a great DIY project that could potentially save me a bunch of money in building supplies. I would (as well as y'all) have to look at the relative strength but I'm sure it would work in non load bearing applications.

[@MaryAnnNytowl]

Yanno, it might, with some epoxy poured over the top, be pretty cool to make interlocking puzzle piece shapes and use them to make a tabletop, a bar top, or even a countertop! That's a VERY intriguing idea! 🤔

[@vne-seti]

И ни слова про нагрев на костре... меня терзают смутные сомнения 😀 парни молодцы, скамейка впечатлила!

[@zoroslostagain1695]

fantastic, I want to acquire these tools to start crafting from recycled materials like this. I already make tcg storage boxes from cardboard junk, but this is much more involved and I think it would be more rewarding. Awesome stuff

[@JesperMakes]

You guys are rocking! I wish I had a brother too!

[@BrothersMake]

Thanks Jesper! Ah, you're very welcome to borrow mine 😅

[@cindyeads4023]

Amazing!!

[@peterxyz3541]

CLEVER!!! YOU are what’s right about the world!

[@BrothersMake]

Haha thank you! 🌎🌎

[@rogermiller5750]

By the way I am Linda my husband passed away last year so I decided to learn to make something out of melted plastic thanks for your video

[@starvingartist733]

You guys inspired me to start melting down and recycling my own plastic, thank you!!!

[@ifur]

Exacly, other from panini how can we transform our plastics to 3d printers

[@BrothersMake]

HDPE isn’t a great candidate for 3D printing filament unfortunately. But so happy we got you started!

[@hojo70]

When you inhale plastic fumes, you’re exposing yourself to a number of toxic chemicals that can damage your lungs and cause a variety of respiratory problems. Some of these chemicals like dioxins and benzene are carcinogenic.

[@db7059]

These guys got me keen as well. It's just taking me alot longer to get going.

[@BrothersMake]

Key word you said there was ‘fumes’. We know our plastics and control the temperatures very carefully. We never burn plastics of any types. With HDPE, that means no fumes

[@nevilpan520]

You men are brilliant. I usually feel depressed when I think of myself as a human being but watching your video makes me proud.

[@marcianorris6147]

Love the bench.

[@BrothersMake]

Thanks. The bench loves you 💚

[@Beatlefan67]

Yeah! Great vid you blokes! The thing that crossed my mind, apart from the fun of making stuff (always good in my book) the lack of hardwood these days means it's difficult to get hold of wood to make decent bats for the ancient game of Bat and Trap. However, I'm sure they could be made from recycled plastic to the correct spec. Brilliant! I'll have to slot this in, along with all my other projects...!! Thanks, chaps - liked and subscribed!

[@ChristopherSchreib-yn1vu]

Dear Sir, there’s a new kind of flooring made out of a color-dyed fiberglass filiament and plastic, which is PHYSICALLY INDESTRUCTIBLE, but EXPENSIVE. It’s not that cheap extruded plastic beams used to replace beachside wood broadwalks (which unlike the insulated wood broadwalks, increments solar heat and will melt the sandals off your feet) but a composite material of lengths of fiberglass threads compressed and melted together. After a homeowner hires someone to construct house floors or patio porch’s out of this material, dyed to look like wood, they always have shortened cut off pieces they usually put on the curb for garbage pickup. If you could ‘cur shop’ those pieces, you could repurpose them into unbreakable baseball bats and unbreakable plastic artifacts, using diamond-edged buzz saws and a LOT of work. EOJ

[@walek7885]

Как же это красиво, практически из мусора делать такую красоту.

[@rustyshackleford7288]

Amazing!!! We need this across the world 🌎!!

[@1pcfred]

We'd be better off burning plastic to generate energy. Melting plastic takes energy. Burnt at a high enough temperature there'd be no hazardous byproducts.

[@ZERODESTRUCTION]

I logged on to finish watching Leon the Lobster shed his shell. I'd just come back from the supermarket full of sadness after visiting with the lobsters in the seafood dept. Yet, I was mesmerized by the cute Brit Bros ironing plastic bags. And, I missed the link to find Kevin the upholstered! Can someone send me the link? Thank You! Liz

[@juliahelland6488]

Thanks again for sharing! 💯 ❣️ In the USA, a grocery chain has shoppers bring in their recyclable plastic bags and they have a company turn them into benches similar to yours. They should just agree not to use plastic bags in the first place. That won't happen until the government bans plastic.

[@annnak]

You are absolutely awesome! The biggest problem our planet is facing right now is the absolute overload with single use plastic.

[@MaryAnnNytowl]

Absofreakinglutely afreakingmen to that!

[@1pcfred]

Then the world just needs bigger problems. But don't worry the present administration has got you covered. Nuclear holocaust will be a real doozy, don't you think? They're working hard on it now.

[@nichellewalton2926]

Will the heat gun or panini press work on the plastic storage bins are made from? I have broken bins that my city won't recycle.

[@SuperMIKevin]

that last bit with the extrusion was amazing!!!

[@BrothersMake]

Thanks! We have a full video on making that bench if you’re interested :)

[@cab102361]

I adore all things gadgets…lol. But cannot of course afford to purchase all these. So I’ll just watch these really cool machines and comment on how . Hope you are having fun recycling stuff. It looks super fun.

[@coololds]

You can get a pretty decent heat gun kit with case and nozzles for $25... even less just for the gun, Most craft stores have $10 embossing heat guns, but they have less control and you'll still end up around the same price since you'll probably want an infrared thermometer, too, if you go that route, which runs around $10. I think my Panini press I use exclusively for crafting was only $5 from Goodwill.

[@stormyeffects4795]

I really appreciate this video. Thank you for showing us all the levels

[@BrothersMake]

You’re very welcome :)

[@sniper31013]

Good job mash'Allah

[@26debsterdots]

I love that you are showing folks to recycle. And the things you make are amazing and exciting. The wheels in my head are turning ! Trying to get husband on board. If not I will do it all by myself hahaha

[@1pcfred]

I've melted a lot of HDPE stock and it can be a handy material but there's limits with what you can do with it. Pressing it like they're doing creates internal stresses in the plastic which makes it impossible to make anything precise out of it. The stuff warps and springs when you cut it. Relieving that stress is something I never figured out how to do. It also takes a lot of time and energy to melt the plastic. So you're not really saving the planet doing it.

[@coololds]

​@@1pcfredYes, there are for sure going to be limitations with this for the majority of us (especially if you only focus on bottle caps) who can only basic DIY it, which means realistically most of us will be contributing via crafts and upcycling, but I mean, you're still diverting waste from landfills and keeping it out of the environment. It's not perfect, but it's better than doing nothing? It's easy to get stuck in the "but I'm just one person" mindset, but if enough of us join up we have strength in numbers and I don't think we should dismiss how that could eventually lead to major change via legislation after educating those around us through our products and hyping others to join or even just helping spread the information.

[@CherylDavison-j8k]

You never cease to amaze me

[@Jim_One-wl4ke]

Thanks for making this video ❤

[@giovannacasadio9600]

Merry Christmas to you to. Thanks for everything.

[@BrothersMake]

Merry Christmas to you too, Giovanna! 🎄

[@helenakhudyna2360]

I didn't know that I need someone to call me a bloody legend. Thank you, that was great

[@BrothersMake]

Thanks for watching til the end!

[@balloney2175]

Very creative, innovative, and environment conscious inventors.

[@AlexVieiraDaSilva1972]

Hello guys , greetings ... Sou daqui do Rio de Janeiro e trabalho como coletor de lixo e todo santo dia centenas de toneladas de variados tipos de plástico são jogados fora , porém aqui no meu país infelizmente não há uma campanha do governo para incentivar a reciclagem de tais materiais . Aliás , faz pouco tempo que devido ás condições financeiras , que várias pessoas estão recolhendo e vendendo em ferros - velhos para ganharem uma renda extra . Não só o plástico , como o papelão , alumínio , ferro e outros materiais são vendidos aos montes . Gostei e achei bem interessante o trabalho de vocês ao mostrar ( e provar ) que muita coisa pode ser feita com o plástico , além de auxiliar a limpeza da mãe -natureza . Um abraço aos dois !!!!!

[@TechsScience]

You are great guys You taught us the simplest way to recycle plastic

[@eugenetswong]

Brothers, thanks for the great ideas! It was really helpful to see the ideas in 1 place. Here are my favourites of this video's suggestions. 1) Cookie cutter! Maybe we can make custom cutters out of tin cans? 2) That single piece of wood mold. I never thought of that. 3) The page holder. I bet that if we set up a public library event, where we offered them for $1, then we could raise awareness and funds for our recycling causes. Have you ever thought of making an HDPE boat?

[@BrothersMake]

Hey Eugene, thanks for your feedback and some nice ideas in there as always! And funnily enough a boat/raft is actually on our list to build and make a video on this summer - so watch this space! ♻️

[@eugenetswong]

@@BrothersMake Good to know. Thanks for the info. I'm interested in making a custom laundry basket, by fastening pieces together instead of melting them. Do you have any suggestions? Maybe cut out some flat pieces from a milk jug, and cut them in a way that allows them to interlock? Maybe ice pop sticks or disposable chopsticks could be use to fasten them together? Actually, that might work. The plastic is flexible enough to fit in small shaped holes, and then sticks could used to keep the inserts from wiggling free. Does that sound right?

[@eugenetswong]

@@BrothersMake By the way, I suggest making a toy boat that is scaled to what you want. This way, you could film both using a forced perspective, and it might make people laugh. Also, by the way, you mentioning the raft makes me think that we can create a snow sled out of HDPE. That would be a great use, I think. Speaking of sleds, there is a sled shovel, which allows us to move snow by pushing a sled shaped shovel, so that nobody has to lift a lot of snow. This might be a nice project. How hard is it to recycle biodegradable plastic? I ask, because I am hoping that the microplastics from wear & tear from using them outdoors are less harmful than HDPE fragments.

[@JvdBos]

Nice stuff 🙂 As a LARPer and cosplayer, this makes me curious to think what I might do for that kind of thing. My current train of thought leads me to think of thick sheets to make sci-fi armour parts out of.

[@rogermiller5750]

Yes I been melting plastic trying it out I just new some one can teach me more about it thanks for your video

[@nesikhah]

Brothers make, you are fantastic. Can we have some ideas for repairing plastics? Example I see a lot of laundry baskets thrown out because of cracks, could we have a video something like that? Thanks so much :)

[@chariddawn6663]

I think that would make beautiful floor tiles with the blue Pepsi lids.

[@olivehennings8770]

Very impressive. I like it. I never knew one can DIY. Especially the handmade ones. Thank u for sharing👍

[@peacefulscrimp5183]

Great video 👍 Recycling is not a myth 😜

[@Dimdi6310]

Just amazing ! Thank you for your great work and time you've spend doing this video. Love it!

[@ElCanaldeJGRV]

Congratulations! You are very PRO recyclers!

[@hernan16th]

Great video, guys! Thanks for sharing all this tips 🤜🤛

[@BrothersMake]

Thanks for watching! 🤙🏽🤙🏽

[@ZOMb2010]

Pretty darn KOoL chaps...cheers from WESTERN CANADA

[@The411]

What wonderful toys you guys have!

[@katehirst6046]

Wow, l loved watching this... The outro is hilarious! 🤣 That bench is wonderful.

[@BrothersMake]

Glad you enjoyed it ☺️

[@gmamah9559]

What a great hustle to take right to the beach! Have people bring their own caps and charge a small fee for labor or bring different colors and make custom!

[@9catlover]

i love the mallet and the bench!

[@trustyourforce4041]

I've been using oven safe molds to make pendants from the scraps of PLA plastic from 3d printing.

[@Oktokolo]

What really holds plastic recycling back is the manual labor required for sorting the source material.

[@tharakaseneviratne6843]

Wow !!! THANK YOU !!! I learnt a lot from your video. I plan to put this knowledge to good use.

[@TrueBlueCat]

Fun Fact: I have that very same blue silicone pad. But alas, no panini maker. Great video guys, thank you!

[@shannfranics8931]

Method 8: sculpt out of clay a mask, mould it in silicone that can withstand up to 300c, cut milk carton HDPE in to 1mm x 1mm shreds then once ready, remove the clay, clean out then pour ina thin layer of your HDPE n blast it with a paint stripper gun, (if youve used polymorph plastic beads this will seem familiar) and using scrap HDPE or i use neoprene (wet suit material) press the plastic in to the fine details of the mould n rinse and repeat till its basically casted allow to cool and remove from mould. you can paint HDPE but its tricky the Rpf have details on that from general motors and their hard hats that are made from you guessed it HDPE. There have been some accounts of people using 3d printers to make their designs from HDPE but not sure what that process is to get it to the right sizes n printer commands but worth a look if youre keen.

[@BrothersMake]

Yes we will definitely be doing a video on silicone moulds in the near future! 3D printing with HDPE is a nightmare. Too much shrinkage takes place when cooking, making uniform cross sectional diameters impossible

[@shannfranics8931]

@@BrothersMake you guys once mentioned that it's near impossible to paint HDPE but I noticed that in its melted state it glues itself to almost everything ever tried adding a pigment n mixing through your twisting air bubble removal technique? In any case before this channel I was wasting money on polyurethane, now I'm cost saving n being environmentally accountable, from Australia I wanted to say thankyou n merry Xmas.

[@1pcfred]

I want to see you pouring thermoplastic. Make a video now. I'd sooner believe molasses can run uphill in January.

[@albanoconsultoria]

Obrigado por existirem!!! Um abraço forte aqui do Brasil!

[@kati1017]

Love the bench! So cool!

[@FunDumb]

You guys would make great additions to the Sea Bums Beach Cleanup Crew.

[@havoc158]

With the book mould if you mount a round piece of aluminium to the top or bottom plate you'll have less waste and less work to do to make the page spreader and with the extrusion machine if you heat the mould you'll get a smoother finish

[@NullaNulla]

I'd LOVE to have the workshop space and money for them CNC machines and the mould injection equipment!!! Oh the possibilities even just from recycled milk bottles.

[@stepcraftgermany]

Great video, guys!!

[@BrothersMake]

Thanks gang!

[@MatGaaaannnaz]

Impressive idea about the chair made by plastic... I wish I can make it for my own used... But still have the machine like that to make the block and assemble it...

[@danlonick800]

This is fantastic. What a great way to recycle plastic.

[@1pcfred]

It takes a lot of energy to melt the plastic.

[@monikasaringer1152]

You guy's are genius, love your work

[@BrothersMake]

Thanks so much!

[@bebechat811]

J'apprécie beaucoup votre travail vous me donnez des idées merci .

[@k.hussain360]

I'm definitely going to be setting up some plastic recycling for the Hackspace, our giant book press would become much more functional as a result.

[@BrothersMake]

Oooh that sounds like a perfect sheet press option!

[@dont.ripfuller6587]

How to video howto - no music - keep it as simple as possible with visual explanation over verbal wehn possible - tedious labor segments edited to 2x speed - continuous shot filming unless grossly impractical (like curing times etc for instance) Simple, quiet, concise makes learning easy, effective and nice 👍🏼

[@BrothersMake]

How to KZbin comment - just don’t

[@auberjean6873]

You are so right! Half the How To videos have irritating, sped-up 50's chipmunk music in the foreground!

[@paulfernandez2695]

Xtraordinary way to teach. Congratulations friends.

[@julia1999rene]

Love that these are assessable

[@antonioferreiro]

Great job guys. I like the way you think.

[@BrothersMake]

Thank you, Antonio ♻️

[@roberthardy2013]

Aluminium dust (tiny pieces) in the molten plastic look great

[@amandasnider2644]

Excellent as always gentlemen! I will add there's one additional method for melting/forming HDPE plastic: Silicone molds for candy and soap making. Best way is to use a toaster oven and melt small cut up plastic bit by bit to fill the molds. For some molds if they are relatively thicker silicone and flatter then I'll finish them with the heating press. Note: the molds don't last forever and some molds tend to not have the best results. Sometimes too much pressure distorts the end result. Also, to add to the tin can I've opened pop cans and melted plastic in them and it's much easier for the plastic to pop out of or remove the can from because it's so thin.

[@starvingartist733]

Vouch, I used a silicone mold this week for my melted plastic and it worked fantastic.

[@BrothersMake]

We’ve definitely missed out silicone moulds! We may do a dedicated video on these next year once we’re practiced more. Great shout with the drinks cans!

[@amandasnider2644]

@@BrothersMake I've found flatter and thicker molds work best vs more 3D shapes. It's not a perfect process because it's difficult to avoid bubbles if you are working with HDPE plastic that isn't bottle caps and therefore less "viscous" (?) And requires more heat. The best results I've had were using molds for candies/fondant of things like leaves where the object is mostly flat but there's some detailing on the silicone that shows up in the plastic (like the veins of the leaves). Most of these molds I used to make small leaf charms. I could send you pictures if you are curious. Ps. Often it involved a lot of re-melting over and over again until all the bubbles are gone or the shape is fully filled. I had hoped that using silicone molds would save me time by avoiding having to file, sand and polish but all the remelting took a lot of time. Still working on improving it though. I believe my main problem is using HDPE from shampoo and conditioner/detergent bottles etc vs lower temperature bottle caps as I have difficulty collecting bottle caps from my apartment recycling bin (lol). I'm also currently experimenting to see if it's best to melt the plastic using a panini press/heat press vs using a toaster oven and furthermore if it's best to only melt using one side of the heat press (for example, the side on top is hot but the bottom the mold is laying on is without heat. I've had problems with bubbles showing up when I remelt and I've had problems of the heat press heating from both sides and squishing too much and everything gets all wonky. I've also had good success using silicone molds from Sculpty meant for oven baked clay. Because Sculpty also makes a silicone clay type stuff to make custom molds, I'd be curious if it'd work for melting HDPE into/onto. I've also thought about using silicone fondant pattern/texture sheets to create texture/pattern on HDPE sheets. Regarding more 3d type silicone molds, especially if they are larger and less thick of silicone... I've experimented with attempting to reinforce the molds using plaster of Paris in hopes that the end results will not distort so I can apply pressure to the plastic to try to remove bubbles. I've given up on this however I do wonder if fireproof/heat safe concrete may work instead. An example of a 3d silicone mold I tried to do was some geometric gemstones/ diamond shapes. I had hoped to make some ornaments, large pendants etc. Final note: if you don't have a silicone spray (which I can't seem to find) I can't guarantee how long you can reuse the pop cans for. I've found you can simply pop the plastic out of a can at least 3 times but eventually there's sticky residue that burns onto the caps and it becomes harder to pop out. I believe that manufacturers actually coat the inside of cans with a very thin layer of plastic so perhaps that's what the burned on residue is.

[@BrothersMake]

What fabulous information! Will definitely be coming back to this comment once we get a little deeper into the silicone tests!

[@projectrebuild908]

Great to see your progression over the years in on Great video. Have a fantastic festive period and hope to see you in the new year.

[@BrothersMake]

Thanks so much! Happy holidays to you too!

[@francyssaint8417]

Its very good I am here in brazil.

[@iosyabrams1094]

Круто! Из одного мусора сделали другой!)

[@andromakss_user63]

Молодцы ребята👏👏👏👍👍👍👍💪✌

[@BrothersMake]

Thank you!