Cool Tools | Introduction to the Silhouette Curio™ by Cindy Pope

  Рет қаралды 72,185

Cool Tools Videos

Cool Tools Videos

Күн бұрын

Пікірлер: 42
@MichaelRolfe
@MichaelRolfe 6 жыл бұрын
How many of these videos do I have to watch before I actually see the actual machine actually doing anything?
@cooltoolsvideos
@cooltoolsvideos 6 жыл бұрын
Hi Michael, there are two introduction videos and so far we have released one project video. You can view the project video here: www.cooltools.us/Video-Silver-Fold-Over-Earrings-using-the-Curio-by-C-Pope-s/2631.htm
@gagandeepkaur4692
@gagandeepkaur4692 4 жыл бұрын
thats what bothering me
@Redmoom
@Redmoom 6 жыл бұрын
Great video. I was hoping to see the part where the design pattern was used in your settings included in this video i.e. Cut/Etch & how the design was set for the actual cutting.
@cooltoolsvideos
@cooltoolsvideos 6 жыл бұрын
Hi Jerry, this will be shown in future videos so be on the look out! :)
@chasgarza3960
@chasgarza3960 4 жыл бұрын
Dang your super talented. I cant even do a simple heat transfer to make a work shirt. I've had my machine almost a year. You are very inspiring. Thanks for sharing this.
@judy2sierra
@judy2sierra 3 жыл бұрын
Can I use the blades I purchased for my cameo 4 in my curio? Thanks so much
@isherwoodme
@isherwoodme 2 жыл бұрын
I have the Designer Edition and the Panels won't save in a stack like you set up. Yes, I saved a blank project and restarted the program and it defaults to just the Page Setup Panel only open. Any ideas to make that setting permanent?
@genmarnet
@genmarnet 3 жыл бұрын
I can pull the menus out and join them together, but when I reopen Studio (Business Edition) they're back on the right side. Is there a way to save them in the stacked mode?
@colinstobbart599
@colinstobbart599 3 жыл бұрын
Hi cindy think your videos are great and very helpfull. I have a cameo can I use this with clay usually use art clay or pmc flex in the Uk we can’t get cool tools clay. Hopefully we can see more of your work with the curio.
@connieefurulee
@connieefurulee 4 жыл бұрын
After watching this and the other limited choices of Silhouette Curio videos over and over I decided to purchase the Silhouette Curio specifically to use for PMC. Cindy makes it look easy. Even purchased different Curio videos at CraftCast.(with mostly outdated versions of the Silhouette software) Frustratingly, I have found without prior knowledge of the Silhouette software the learning curve for the business edition has been a bit steep. My question is what determines how many platforms are used with the user defined settings described in this video.
@cindypope6122
@cindypope6122 4 жыл бұрын
0 to 1.25 mm thickness - use all 6 mm of platforms 1.5 to 2.5/2.75 mm - use 5 mm of platforms (remove the 1mm platform) 2.75 to 3.75 mm - use 4mm of platforms (remove the 2mm platform)
@cindypope6122
@cindypope6122 4 жыл бұрын
Thanks so much for for purchasing some of my craftcast classes. I would recommend the Learning The software Video. www.craftcast.com/recordings/getting-know-silhouette-software-version-4 if you are having problems with the software. Please also join the McSilies facebook group and I will help you join the free private student group for craftcast students which will give you any support you need. facebook.com/groups/MCSilies/
@connieefurulee
@connieefurulee 4 жыл бұрын
@@cindypope6122 🙋🏼thanks Cindy for your response. The struggle is real 🤪🧐😡🤣but I will keep trying. Unfortunately I don’t do Facebook but thanks again for the suggestion and support. I believe with determination and practice, eventually I’ll overcome the steep learning curve. I read somewhere you said at least 15 minutes a day of practice until the steps of a project are memorized without referring back. I’m getting there.
@jolitavanpelt7313
@jolitavanpelt7313 2 жыл бұрын
When I cut or engrave vinyl with the curio, it cuts or engraves in mirror image. What am I doing wrong?
@anduarbi5809
@anduarbi5809 3 жыл бұрын
Hi Cindy, I am getting the Silhouette Curio and take your Silhouette Curio Craftcast video tutorials, but...is it true that Silhouette is discontinuing the Curio? Thanks
@heididurbin9887
@heididurbin9887 4 жыл бұрын
I am trying to follow and bought the kit. Unfortunately my settings don't look the same under send so I am mystified and cant follow and wonder how I'll ever figure this out. I sure wish the pdf had step by step instructions. So sad
@cooltoolsvideos
@cooltoolsvideos 4 жыл бұрын
Hi Heidi, if you email us at sales@cooltools.us, we would be happy to let Cindy know your email address so that she can help you.
@smokahj715
@smokahj715 3 жыл бұрын
Are you able to use the cutting mat 12x12 on the curio?
@davidgreenspan9189
@davidgreenspan9189 Жыл бұрын
Cool 🔧 thanks
@christinarouse1209
@christinarouse1209 3 жыл бұрын
Hey I’m trying to place an order for this kit but it says there’s an item not available?
@cooltoolsvideos
@cooltoolsvideos 3 жыл бұрын
Hi Chrissy, unfortunately Silhouette has been having issues and we have been out of stock for these kits for awhile now. We are unable to know when they will become back in stock, but if you click on the "email me when this is back in stock" you'll be notified as soon as they are. So sorry for any inconvenience.
@Robindalmiras
@Robindalmiras 3 жыл бұрын
Is there a course that’s recommended for the machine? I am so interested in purchasing
@kristijanbelevski4948
@kristijanbelevski4948 3 жыл бұрын
Can someone tell me can i make the stickers or only i can cut it?
@lindawitt9140
@lindawitt9140 5 жыл бұрын
When trying to set up the user defined settings on line color, I only 1 line and the box is red. How do I add the other lines and change the color. I did read a comment below and added some boxes. Also. How do I get the pdf you indicate you provided. I have spent many hours trying to familiarize myself but still have not been able to actually use the Curio. Is it usually that difficult to perform a simple task.
@cooltoolsvideos
@cooltoolsvideos 5 жыл бұрын
Hi Linda, the pdf can be found here: www.cooltools.us/Video-Introduction-to-the-Silhouette-Curio-by-Cindy-Pope-s/2619.htm Cindy Pope explained to us: The user defined settings are not just a simple step in the process they are a foundational part of the process because the user defined settings preset in the program are for paper and vinyl and other things, not for metal clay. We need to add them only once so they are always available when the machine is used for metal clay. The colors are the colors of the lines of the titles (blue ) and the line colors of the boxes (red) . If you have only one color of box or shape on the screen (red the default color) when you go to cut by line color under the send tab you will only see the red line. If you draw a second box and change the line color to Blue and go into the same screen you will show the 2 color of lines in your file blue and red. Hope this helps! Please note that there are other videos as well by Cindy that may help. She noted that: On the earring design video minute 16 to 22ish you will see the color scheme (red for cut, Blue and Green for Etch) www.cooltools.us/Project-Video-Silver-Fold-Over-Earrings-using-p/ctp-295.htm On the Faux Bone Video minute 23 to 30ish talk about the send screen also www.cooltools.us/Project-Video-Design-and-Etch-on-Faux-Bone-p/ctp-327.htm
@kathleenbehrmann1139
@kathleenbehrmann1139 6 жыл бұрын
Help!!!i bought a Curio to use with metal clay specifically. When setting up my software and machine, I’ve come to a hurdle. When selecting my preferences and user defined settings, I click on the “line” tab and nothing is in those fields. There is no + sign or any way to add info in those fields. I can, however, see populated fields in the “simple” tab. What am I doing wrong???? This is driving me cuckoo and I don’t know where to get help!🤔
@cooltoolsvideos
@cooltoolsvideos 6 жыл бұрын
Hi Kathleen, we asked Cindy your question and she replied: "She needs to have at least one shape drawn on the design screen in order to see anything in the cut by line color tab. There need to be lines for the cut by line color tab to be populated. In the video there are 2 shapes on the screen. She will only see one tool in the send screen unless she has her Curio plugged in with the platform loaded." Hope this helps!
@RockinJohnny
@RockinJohnny 4 жыл бұрын
My load un load button dosent unlock mine I have to turn off the power button to unlock it
@Echoia
@Echoia 6 жыл бұрын
When you say, "made these stands", do you mean you cut the stands out and assembled them, or that you decorated them? What materials were used?
@cooltoolsvideos
@cooltoolsvideos 6 жыл бұрын
Hello, we asked Cindy your question and she replied: The stands are from my friends at Craft Chameleon. They are etched on the Silhouette. You would need a fancy laser cutter to cut Acrylic Like this.www.craftchameleon.com/products/acrylic-phone-stand. I have a class on craftcast that shows the whole process and lots of other things. www.craftcast.com/recordings/etching-your-curio Have a good day!
@Echoia
@Echoia 6 жыл бұрын
Thank you for answering my question so quickly! I appreciate it. I figured they were cut with something else, just wanted to make sure, because that would have been a guaranteed curio sale ; )
@Jewerly212
@Jewerly212 6 жыл бұрын
Hi! Great video and intro to this incredible "tool". You make reference to a pdf when your setting the blade tools. What and where would this pdf be?
@cooltoolsvideos
@cooltoolsvideos 6 жыл бұрын
Hello, you can find the pdf here: www.cooltools.us/v/vspfiles/assets/pdf/PopeCurioSettings.pdf Have a good day!
@theresaclasby
@theresaclasby 10 ай бұрын
I’m looking for the preference and user defined settings for the curio. I saw a comment that had a link but it doesn’t go to the document. Any help?
@se5442
@se5442 5 жыл бұрын
So - polymer clay! A new line of thought to me for using my Curio! hhmmm
@cindypope6122
@cindypope6122 4 жыл бұрын
You can totally use your machine with Polymer clay This is using a slightly older version of the software but I learned to use my machine with polymer from Mags www.craftcast.com/videos/create-3d-flower-polymer-clay-necklace-using-your-silhouette-cameo
@sherrybrook3128
@sherrybrook3128 4 жыл бұрын
What are the settings for 3 and 4 card clay?
@cooltoolsvideos
@cooltoolsvideos 4 жыл бұрын
Hi Sherry, you can find the document with information on settings for each card thickness here: www.cooltools.us/v/vspfiles/assets/pdf/PopeCurioSettings.pdf
@kayscreativeboutique
@kayscreativeboutique 6 жыл бұрын
love your bracelet! How did you attach the metal piece to the leather?
@cooltoolsvideos
@cooltoolsvideos 6 жыл бұрын
Hello, Cindy attached the metal piece by using a hidden rivet method that she has only taught in her personal workshops. In the future, this may become a Cool Tools video :)
Cool Tools | FS999™ Three Layer Pendant by Cindy Pope
44:01
Cool Tools Videos
Рет қаралды 16 М.
Colorful Pasta Painting for Fun Times! 🍝 🎨
00:29
La La Learn
Рет қаралды 308 МЛН
amazing#devil #lilith #funny #shorts
00:15
Devil Lilith
Рет қаралды 18 МЛН
World’s strongest WOMAN vs regular GIRLS
00:56
A4
Рет қаралды 16 МЛН
Car Bubble vs Lamborghini
00:33
Stokes Twins
Рет қаралды 27 МЛН
Режущий плоттер Silhouette Curio планшетный
10:30
Лето будет! silhouetteshopru
Рет қаралды 10 М.
Etching Acrylic with the Silhouette Curio
25:36
Miss Mary Embroidery
Рет қаралды 32 М.
Can I Make Titanium Damascus? Part 3
21:28
Alec Steele
Рет қаралды 549 М.
Houdini Algorithmic Live #042 - Night Cityscape with Wave Function Collapse
3:57:55
Silhouette Curio Unboxing by Silhouette Secrets+
28:30
SilhouetteSecrets.com
Рет қаралды 11 М.
Colorful Pasta Painting for Fun Times! 🍝 🎨
00:29
La La Learn
Рет қаралды 308 МЛН