Cool Tools | Rolling Metal Clay Sheet for the Silhouette Curio™ by Cindy Pope

[@annewade4228]

Hi Cindy. Can you also use polymer clay in the curio?

[@cooltoolsvideos]

Hello, yes. You can use polymer clay with the Curio. Thanks for watching!

[@RadiantJasmin]

What are the measurements for the Rolling Frames for Silhouette Curio? I have the large frames and need to see how these are in comparison, Thanks!

[@cooltoolsvideos]

Hello, the Curio Rolling Frames have an outer diameter of 8"x8" and inside of 6"x6". You can find them here: www.cooltools.us/ProductDetails.asp?ProductCode=CRL-900-P Hope this helps!

[@melanieland2370]

I really like your leather bracelet. I love a cuff but find the thickness on the back if my wrist to be quite uncomfortable. Where might I purchase these or can they be made.

[@cooltoolsvideos]

Hi Melanie, we asked Cindy about this and she replied: Glad she admired my Cuff . I am doing a class on Craftcast May 25th on making these Cuffs. It should be listed soon. www.craftcast.com/ Have a good day!

[@barbaraacosta2019]

Hello, I only have Silhouette CAMEO, can use for clay metal, I am hope so, thank you

[@cooltoolsvideos]

Yes, the Silhouette Cameo can be used with metal clay.

[@RadiantJasmin]

Since a 1.5 card thicknesses rolling frame is good for a bezel, what would you use a 1 card thicknesses rolling frame for?

[@cooltoolsvideos]

Hello, we asked Cindy your question and she replied: You can use it for a double bezel to keep the thickness down and/or and projects overlays (paper punches, or sil cut outs that will be layered on top of another piece) . Also EZ960 would most likely be a nice strong bezel at 1 card. Hope this helps!

[@RadiantJasmin]

@@cooltoolsvideos Thanks! As I already have the large set of rolling frames, I wanted to know that to see if I really needed to get those 2 extra frames that aren't in that set.

[@ЕржанБазарбеков-я3л]

Состав глины и можно ли добавить полимерную глину в металл глину

[@cooltoolsvideos]

Hi, yes, polymer clay can be added after metal clay is fired.

[@АвгустоПиночет-п5б]

Thanks for the video. I have a question concerning cut offs. How do you keep them fresh and flexible? Is there any special liquid for that?

[@cooltoolsvideos]

Hello, there is no special liquid for this. Simply a good cutter will create a smooth cut. Thanks for the question!

[@АвгустоПиночет-п5б]

@@Architecture_and_visualization you are right

[@cooltoolsvideos]

Hi, the cut offs can simply be placed anywhere and they will stay fresh and flexible because the clay has already been completely bone dried. If you decided to not use the cut offs, you can always reconstitute it and turn it back into clay. We have a video on this as well that can be found here: www.cooltools.us/searchresults.asp?Search=reconsitute&Submit=Search I hope this answers the question!

[@cooltoolsvideos]

Hi, the cut offs can simply be placed anywhere and they will stay fresh and flexible because the clay has already been completely bone dried. If you decided to not use the cut offs, you can always reconstitute it and turn it back into clay. We have a video on this as well that can be found here: www.cooltools.us/searchresults.asp?Search=reconsitute&Submit=Search I hope this answers the question!

[@АвгустоПиночет-п5б]

@@cooltoolsvideos thanks

[@saramatherly7203]

Why use olive oil instead of Cool Tool's Cool Slip?

[@cooltoolsvideos]

Hi Sara, Cindy has not tested Cool Slip and FS999 with the Curio. She uses olive oil only. Until this is tested we cannot recommend it. Hope this helps!