You are the only one who showed how to disconnect the connector without breaking, thank you!!!
@screwsnutsandbolts4 жыл бұрын
Thanks for watching :)
@Max345574 жыл бұрын
Just replaced mine, it was a horrible experience. Managed to drop the new rubber ring while coolant was pouring out, but i did manage to get it installed thanks to this video!
@screwsnutsandbolts4 жыл бұрын
Oh dear !. Yeah it's a bit of a job getting it out and replacing it without losing too much coolant. At least you got it sorted. Good work ! :)
@okac989 ай бұрын
Thank you so much to showed how to do...✍💪🍾🍾
@screwsnutsandbolts9 ай бұрын
You're very welcome !
@procrastination35602 жыл бұрын
Thank you so much other's didn't show it like this
@screwsnutsandbolts2 жыл бұрын
You're very welcome !
@martinnaylor2 жыл бұрын
Great video there,I've been trying to locate the temp sensor on the wife's 1.6 16v Mk4 as the temp gauge needle doesn't move at all and it has the management light on too,it will sometimes miss under hard acceleration. Think ill be getting my hands dirty soon as it looks an easy fix.👍🏻👍🏻
@screwsnutsandbolts2 жыл бұрын
Best of luck 👍
@atakan8884 жыл бұрын
Thanks for the video. There is no service near my home and my polo has bad sensor. I can change it by myself thanks to you.
@screwsnutsandbolts4 жыл бұрын
Thanks for watching :)
@AhmedAhmed-zd6uo3 жыл бұрын
How did you know that this sensor is not working?what is symptoms for not working?
@atakan8883 жыл бұрын
@@screwsnutsandbolts the temperature indicator was moving 0 to 90 continiously
@roccomcg69105 жыл бұрын
Looked easy ...thought I could have a go at this myself until I seen the fluid come out and it gave me the fear lol ...thanks for posting
@screwsnutsandbolts5 жыл бұрын
You're welcome, yeah I thought that too but I gave it a go anyway :)
@kevingoulding234 жыл бұрын
Good job so easy done the job myself lost loads of liquid should of looked at the video first
@screwsnutsandbolts4 жыл бұрын
Thanks !. Yeah that's an easy thing to do alright
@philipmurray40653 жыл бұрын
The Best video explaining The procedure clearly and showing all details. By the way I have tiguan 1.4 tsi 2012 and there is start problem in the mornings unless I push gas pedal a little. Can the problem be this sensor? But my heating indicator doesn't appear to have a problem
@screwsnutsandbolts3 жыл бұрын
Thanks. Yes it could be the coolant temperature sensor or a number of other things, including the throttle body. Just out of interest, when you turn the key to the 'on' position, without starting the car, do you hear a high pitched noise from the throttle body idle control motor ?
@philipmurray40653 жыл бұрын
@@screwsnutsandbolts i dont know where throttle body idle control motor but when I'm in the car and turn the key without starting the car I hear that noise. By the way after writing you I used an obd II device to check for errors and I got "P1259 engine coolant system valve short to ground" error and I cleared it and I don't know what it is and what will happen tomorrow morning I try to start the car
@screwsnutsandbolts3 жыл бұрын
@@philipmurray4065 I've not heard of that error. If the problem persists I'd advise taking it to a mechanic to have it looked at.
@Passengervehicles5 жыл бұрын
Good job !
@screwsnutsandbolts5 жыл бұрын
Thanks !
@mariusangeljirebie93094 жыл бұрын
Very good work.
@screwsnutsandbolts4 жыл бұрын
Thanks for watching ! :)
@Marian-re3ehАй бұрын
Its the same work for 1,6 AZD golf 4? Thanks!
@paulmoakes99444 жыл бұрын
Nice video, I noticed the old one had a rubber ring on but the new one didn’t. Am I missing something? Thanks
@paulmoakes99444 жыл бұрын
Oh hang, I’ve taken mine out just now and it’s got a rubber ring
@paulmoakes99444 жыл бұрын
Will the new one come with a rubber ring please
@screwsnutsandbolts4 жыл бұрын
Yes it should come with a new rubber O-ring
@paulmoakes99444 жыл бұрын
@@screwsnutsandbolts thanks for replying. I’m doing these little jobs while I wait for my recon ert
@MarcoKoenig953 жыл бұрын
Nice Video! Why there was no O Ring ?
@procrastination3560 Жыл бұрын
Hi I am back again. Have now starting trouble, disconnected it and it starts well. Dash works tho. Gonna chnage it again 😂
@jacobchhabra663 жыл бұрын
Hi I have a polo 1.4 2005 just little confuse about sensor 2 pin or 4 pin for fit my car
@screwsnutsandbolts3 жыл бұрын
Petrol or diesel ?
@in4chandru5 жыл бұрын
Thanks for the video. Do you know the part number by any chance?
@screwsnutsandbolts5 жыл бұрын
You're welcome. The part number I have is 059919501a
@in4chandru5 жыл бұрын
ScrewsNutsAndBolts perfect! Thank you!
@screwsnutsandbolts5 жыл бұрын
@@in4chandru No problem :)
@6kd62 жыл бұрын
Hello, and thank you for all your videos. I would really appreciate if you can help me identifying the part involving a thin hose/tube on top of the HERE IT IS arrow, with heat protection only on its end. Please see minute 00:49. It is broken in my unit and I do not know the replacement part. Maybe you can help me. Thank you. Regards.
@screwsnutsandbolts2 жыл бұрын
Do you mean the EGR exhaust control valve: www.123spareparts.co.uk/car-parts/metzger/p-8030877
@6kd62 жыл бұрын
@@screwsnutsandbolts yes… the vacuum tube that goes to the back is bad… thanks
@screwsnutsandbolts2 жыл бұрын
@@6kd6 The hose used is something like this but I'm not sure of the exact diameter: www.ebay.ie/itm/353073153077
@screwsnutsandbolts2 жыл бұрын
@@6kd6 Ahh. Good luck 👍
@Kknd6263 жыл бұрын
This it tiguan TSI same?
@screwsnutsandbolts3 жыл бұрын
I'm not sure
@Zenthronix3 жыл бұрын
Wow that’s pretty easy. Bet.
@darlingsaruwaka30233 жыл бұрын
Just did my engine overhaul on 1.4litre Polo 2002 but when you start it temperature increases after a few minutes before it even moves.Could changing temperature sensor help
@screwsnutsandbolts3 жыл бұрын
It's possible but it could also be a faulty thermostat
@NeroxEditz4 жыл бұрын
My engine control lamp still lights up... do i need to reset it, after it works?
@screwsnutsandbolts4 жыл бұрын
You might have to reset the error code but is it possible there's another reason why the the light came on ?. It might be worth taking it to a garage to have it checked out.
@MALUMEMALUME-mn9tg3 жыл бұрын
What if you put a new temperature sensor with same part number but when you start your car it start after many attempts
@screwsnutsandbolts3 жыл бұрын
Did it start ok before you changed it ?
@MALUMEMALUME-mn9tg3 жыл бұрын
@@screwsnutsandbolts yes but the problem it doesn't go up the gauge
@screwsnutsandbolts3 жыл бұрын
@@MALUMEMALUME-mn9tg Does the new sensor show the temperature on the gauge when you get the car started ?
@MALUMEMALUME-mn9tg3 жыл бұрын
@@screwsnutsandbolts yes the gauge is perfect
@screwsnutsandbolts3 жыл бұрын
@@MALUMEMALUME-mn9tg That's strange. I haven't come across that before
@shadisafadi28943 жыл бұрын
Hello, I have a problem and need help, the temperature remains 0, and the cooling fans are working all the time. I hope for help. Thank you
@screwsnutsandbolts3 жыл бұрын
It could be caused by a few different things like low coolant level, a faulty thermostat, or a failing coolant fan switch.