Cooler Master's HAF XB case unboxing.... DONE! This thing has phenomenal build quality considering the price and a very modern feature set to go with it! CA: ncix.com/search... US: us.ncix.com/sea...
Пікірлер: 992
@Stopnrob4 жыл бұрын
10/10 for longevity, 7 years later and this is about to be in a new build.
@603840Jrg4 жыл бұрын
Starting my new build with the EVO refresh of the case, I'm really glad to hear this.
@Stopnrob4 жыл бұрын
@@603840Jrg bought the case (which is the EVO refresh) and a 2070 Super just in time for COVID-19, so couldn't justify purchasing the rest of the build, at least not yet.
@x7slim8x4 жыл бұрын
I just refreshed mine with white and black krylon. Looks amazing!
@x7slim8x4 жыл бұрын
...I also replaced the top mesh and 200mm fan with acrylic and added some strips to get that glowing effect on the acrylic.
@redshirtwookiee4 жыл бұрын
I made one recently too! Love the case.
@communistpootisbirb2 жыл бұрын
9 years later, just bought this case for my current build for $90 new. Absolutely love it. The amount of space and modularity makes this cool case (pun, laugh now) allow large PSU’s and GPU’s to fit. Even 3000’s could still manage to fit in this case! New cases have the fancy fan placement but it’s so hard to find cases that aren’t 100% glass or have front end bays for HDD’s and old school disc drives. Only thing I don’t like; removing the front face plate. Feels cheap and will 100% wear after a while of constant removing/reassembling. This case stood the test of time and is still better than 90% of cases that cost 2x as much!
@neckolavato81732 жыл бұрын
Where did you get it for such a good price?
@LinusTechTips11 жыл бұрын
Yes I agree 100% The build quality on this case is miles ahead of the original HAF932 when it launched. This is an incredibly well engineered case. Very solid. I'm super impressed.
@slemded3 жыл бұрын
Ur using this case rn
@maikel17072 жыл бұрын
After 10+ years, i'm building myself a computer again. Looked the case up on google and Linus dropped by :D... Sweeeet!
@samlevi47442 жыл бұрын
@@maikel1707 I just built using it.
@ScorpioBuu3 жыл бұрын
Quite possibly the most underrated case on the market
@caydenfeese7940 Жыл бұрын
Found this case today, and decided to research it. Old ass Linus video truly popping off
@sellera4 жыл бұрын
April 2020, the world is in flames because the COVID19, and I've just bought HAF XB EVO for my 3700X build, almost EIGHT YEARS after Linus reviewed it.
@TheSaabbath4 жыл бұрын
I fell out my chair reading this as i'm doing the same for a thread-ripper build with my Trump Bucks XD
@ermad93394 жыл бұрын
Me too😎
@officiallyjk4203 жыл бұрын
Looking at this for a Ryzen 3600 build!
@sellera3 жыл бұрын
@@officiallyjk420 it’s solid and very easy to build, just falls a little short concerning cable management comparing to newer models.
@monsterhunter4453 жыл бұрын
Same cpu I just bought this build will be for unraid. All the LTT and level one linux propaganda got to me lol but this video I stumbled after I bought
@Nathankinamorh5 жыл бұрын
One of the best cases ever made. Half a decade later Cool Master still sells the shit out of those cases.
@behemothokun4 жыл бұрын
Have one too; I bought it when I saw this video back when it came out. Building a new system in it right now, so I got sentimental and revisited this video.
@user-xz6iq8tg5r4 жыл бұрын
Guys, do you have problems with dust. I'm thinking about buying this case for my new PC, but unfortunately in my case the PC will be directly on the ground. I'm asking, because the only dust filter in this product is for the PSU. No filter on top, front or back.
@user-xz6iq8tg5r4 жыл бұрын
@Will Pack will do it. My point was if you have noticed some excessive problems with this enemy. :)
@EmergencyChannel4 жыл бұрын
Take two thumb screws out, slide off side panel and hit with canned air. It’s now clean, repeat once every few months. Filters are nice, but we lived without them for decades.
@sellera4 жыл бұрын
I've just bought one for my new rig, and I guess it will outlast every case I've ever used.
@k2In14 жыл бұрын
This case is truly future proof. None of 2019's cases can have such interesting designs but boring psu shroud,...
@k2In14 жыл бұрын
@Homer Says Doh Fvck it Im buying one right now!
@TheMegalodonGaming3 жыл бұрын
@Homer Says Doh im reusing mine in a modern build and it lacks zero features. A case truly ahead of its time.
@romiipower4 жыл бұрын
Eight years later and I'm still rockin the cube!
@dudeomfgstfux7 жыл бұрын
5 years later still rocking the Cube
@TheCapn236 жыл бұрын
5 years after release and I'm just getting around to buying one. Can't wait for mine to get here.
@landonp6295 жыл бұрын
More than happy with my HAF XB. Airflow is certainly not an issue in this case, and the 'vertical' GPU mounting and horizontal CPU means no GPU sag and no heavy CPU coolers pulling down the motherboard. I wish more cases were designed with 'lay flat' motherboard designs.
@AndreBorisov5 жыл бұрын
Almost 7 years later... still loving my HAF XB cube.... companion cube.
@psun2564 жыл бұрын
Mine just came in the mail now, but I had been wanting a rig using this for 3 years now lol
@shentot64 жыл бұрын
@Tab If you think you were late. Look at me now
@constantinlindenbauer9967 Жыл бұрын
Amazing how this design is 10 years later one of the best cases in that form - the designer can be very proud of himself also amazing to look back in time and see Linus' studio - amazing how this channel has grown - good work there
@KyleSGibson Жыл бұрын
shoutout to anyone still rocking one of these cases in 2023... i just upgraded my system in it from being a home theater PC to a flight sim PC. this is the easiest case to build in, and the front 5 inch bays have so much potential for customization. I've been considering adding an LCD panel on the front lol
@PervasiveFire3 жыл бұрын
8 years later and I'm about to buy this lol
@IanTheCat3 жыл бұрын
Same!
@m4dalex4783 жыл бұрын
SAAAAAME XD
@cmdrefstathiusplacidus90034 жыл бұрын
I love this case. Still using it 5 years later.
@cmdrefstathiusplacidus90034 жыл бұрын
@Michael Wolff if you really wanted to be extra thorough you could physically remove remove each of the front fans and clean them outside of the case. I just pop the front cover off and actually all the covers, remove the motherboard tray, remove all the cables remove anything that I think I might directly affect the force of air pressure going to the specific spot that I am aiming for with the air compressor. I don't pull the CPU heatsink or anything like that but I would pull the fans and radiator if you're doing a i o and give them a good pressurized blast of air. You'd be surprised how much dust is collected in places you might be inclined to skip over. I cannot emphasize this one enough remove power supply remove power supply remove power supply spend 15 minutes with a high powered air compressor blowing it through the power supply at every angle you can possibly think of!
@clinthamilton17132 жыл бұрын
Years after this case was released, years after this video was published, I am building my new 12900KS system in it. A very solid design. A very helpful video.
@loveableterror6742 жыл бұрын
Just bought this case for my new living room PC. Taking my buddies old AM3+ build, since I am upgrading him right now, and adding a 6600 XT to it for some nice light couch PC gaming, as well as making it the streaming server for the house. Super excited as this case still looks amazing 10 years later
@ODSTxGundam3 жыл бұрын
Damn this case was ahead of it's time. This is something I'm looking for in 2020, especially considering it still has 5.25 slots.
@Durrpadil5 жыл бұрын
I've had this case since 2014 and it keeps all my components in perfect temperature ranges. Don't forget to give it a thorough cleaning when you can. My biggest gripe is that dust accumulates on the front fans which produces an ugly filament of dust which is very difficult to clean other than take out the front panel.
@zsaber205 жыл бұрын
Been trying to figure out how to remove the front panel to clean it without breaking it..any suggestions?
@MichaelCormier10 жыл бұрын
I picked up this case on Newegg just yesterday but I decided to look up a video or two just to get an idea of the actual scale of it and what it's really like to take it apart. This thing looks like a dream and I can't wait to migrate my components into it. Wonderful video. :)
@MichaelCormier10 жыл бұрын
***** I almost prefer it a bit on the heavy duty side so that's good news to me! Really I need it for more open airflow. My R9 290 is just too confined in my current case. It seems like this will be compact and have great flow. Can't wait 'till it gets here!
@BiafraRepublic10 жыл бұрын
I have the Azza Solano 1000. Lots of room in that beast
@LinusTechTips11 жыл бұрын
Good point. There are 4 thumb screws, and once you remove them the motherboard tray pops out. Personally I would leave it in while assembling the PC since I find removable motherboard trays to be more of a hassle than anything else, but I should have taken it out for completeness' sake.
@TheGameboyGTS9 жыл бұрын
the HAF XB EVO actually changed the 2.5" bays inside to 3.5", and comes with a dual 2.5" adapter. they also changed the power plug on the x-dock board to use a SATA plug, instead of the 4-pin Molex to avoid accidentally plugging it in upside down.
@MunkleFunkle9 жыл бұрын
the evo is amazing
@thepoliticalstartrek9 жыл бұрын
I bought a Haf BX recently glad they changed that. I also noticed the sata connectors for the hotswap bay ARE ON THE TOP EDGE AND LOW PROFILE.
@jimthvac1005 жыл бұрын
I have the HAF XB ATX I wish I had the EVO the ATX version has the 2.5" inside bays witch are pretty much worthless to me I wish I could buy the 3.5" bracket from the EVO parts to fabricate and put in my ATX version but cant find a way to get to get this on there web site
@CyrilCommando2 жыл бұрын
@@jimthvac100 I'd love to buy you an EVO if you trade me your OG model.
@LinusTechTips11 жыл бұрын
I'm always doing videos of super new stuff, so it might not be added to the site yet. Often if you go back and look at older videos (Logitech G710+ for example) there will be complaints that the link was broken, but if you click the link it works. This is because I put in a link that I knew would work in the future, but that doesn't help me at the actual time of release for the video. I work at NCIX, so it's not like I can link to somewhere else...
@dtbone67 жыл бұрын
the best thing about this case is that a heavy video card like a 980, sits on its PCB and dose not " Hang " your card on its side.. increasing the life of your card.
@Ragnarok88075 жыл бұрын
The main reason I got mine, as a matter of fact.
@christophegroulx81875 жыл бұрын
It's not gonna increase anything its lifespan though
@Daniwasinvented3 жыл бұрын
I've owned this case for almost a decade and today I learned new things about it thanks to Linus. This dude knows everything about everything. Awesome video.
@biddyboo88 жыл бұрын
I've got the HAF XB EVO for my beast PC and I love it. Big fan of cube cases now.
@biddyboo88 жыл бұрын
I had a $2000 dollar budget
@1soupasaurus7 жыл бұрын
I'm torn between the HAF XB Evo and the Thermaltake Core X5. Did you have a similar problem choosing which one to get?
@MrBudderTacoMBT7 жыл бұрын
3 months later I'm sure you made a choice, but Thermaltake cases are cheaply made under the $100 mark. Had 3, never will buy another again.
@NomadOverNormal6 жыл бұрын
Fatrick Stare would you recommend installing new fans? The guys at micro center said I should buy and place in New fans for heavy video editing
@ashberic5 жыл бұрын
hate to be the one to break it to you but it's not a cube
@AndrewTJackson2 жыл бұрын
This case is still BRILLIANT in 2022 and is serving me well. It has my current build in it and it will house my next build too. It's perfect for me. :-)
@MegaGearz10 жыл бұрын
you know somethings good quality when it even shocks linus lol
@603Madison10 ай бұрын
I'm literally about to buy one of these to build a server inside of it. Good job Cooler Master on making a case that is still relevant and still worth buying.
@colewelden10 ай бұрын
Not a lot of cases have that kind of staying power. I loved my Corsair 400C, and it sold like crazy but was basically irrelevant 3 years later. Sad. I'm also getting one of these for my Plex server
@grantingtherant14654 жыл бұрын
My neighbor left this on the curb, and I've been looking for an excuse to build a new computer for a few weeks now. Now it's not a question of if but when
@lelandeggleston10419 жыл бұрын
I built my system last week and this is by far the best case I have ever used. You need this case!
@perimotilaran32288 жыл бұрын
Linus do a HAF XB EVO BUILD
@pepe7drum4 жыл бұрын
We are still waiting for one
@kyusuncho69483 жыл бұрын
He finally did it in the herd mentality pc build!
@meisterpatch8494 жыл бұрын
I have the HAF XB EVO (RC-902XB-KKN2) which has the mesh top panel. I have had it for ~7 years. I have performed many, many builds with a variety of cases. The HAF XB EVO is the best case I've ever had. I have no idea why CoolerMaster ever discontinued it; the case was wildly popular in its day. The only problem -- and it isn't even much of a problem -- is that the top panel (I have the mesh version) won't actually support installation of a 200mm fan as advertised because a) the screw hole mounting configuration doesn't match anything on the market, and b) an internally mounted fan would not permit enough clearance for any standard sized GPU with attached power cables. Notwithstanding, this is the best case I've ever used. CoolerMaster made a bad decision when it took this out of its product line.
@ryant240710 жыл бұрын
I was looking for something unique for my new build, this might be it :)
@josiahcochran82904 жыл бұрын
I’m still rocking this case all these years later and it is a monster airflow case
@TheBioethicist10 жыл бұрын
Please do a build in this case.
@jamesdraperandfrends10 жыл бұрын
i would also like this.
@centerpinfishingaddicts489710 жыл бұрын
+james Draper I would also love to see you do a high end build in this case or mod to it as well
@jamesdraperandfrends10 жыл бұрын
me?
@kenzito67533 жыл бұрын
Just bought one last week and putting together a new build for Father's Day weekend glory and serenity! This case lacks nothing. Seating 2 500gb 3.5" SATA drives in the back in Raid0 for backing up the bottom front SSD; up front in the removable drive bays will be 2 SSD's - top the (removable) boot drive OS, bottom - fast storage SSD drive/volume for lightning quick network access to other PC's across the network. 5.25" bays are DVD Optical drive, and below, yet to be determined. Thinking of sticking a big fast multi-terabyte mechanical hard disk in there for content creation & media storage. Also looking for decent sounding 5.25" drive bay speakers. Have fun with your own build!
@organicsaturn48139 ай бұрын
This case was so far ahead of its time, the fact Linus's main critique was the lack of 3.5inch drive slots is amazing considering the SSD dominated market now.
@xanderwusky30014 жыл бұрын
"Be sure you have an external storage solution because this case is mostly ssd ready" Ah yes, 7 years ago. When this might have been an issue.
@swiftfox34613 жыл бұрын
Did somebody say 6xSSD RAID? Cause I sure wouldn't mind having one.
@xanderwusky30013 жыл бұрын
@@swiftfox3461 hell yes, I mean I dont even have that many slots. Got a lot too though. My case has 4 ssd cages and 6 hdd cages. (Which can also mount ssd but looks a better with hdds haha)
@AdrianoTorres783 жыл бұрын
Building my pc with this case almost 9 years later, best case I have in my entire life, and i will buy another only to stock up for the future.
@abm_prottoy3 жыл бұрын
Who's here from the Newegg video?
@Koolblue9003 жыл бұрын
Lol I saw the video and immediately was like hey that case is kinda cool. Deciding between this and the cooler master h500
@abm_prottoy3 жыл бұрын
@@Koolblue900 I saw it in his stories and found it cool too. Then searched for a quick review and Linus's review was the first thing to come up.
@DaRoach58823 жыл бұрын
Building a new server put of old parts for my home and this thing is perfect for putting up on a high shelf! Did some hot swap trays in the 5.25" bays so I could have 4 hotswaps in the front
@a647388 жыл бұрын
Warning !!! In spite of HAF XB case having some of the best airflow it has a major design flaw when it comes to the cooling of the hard-disks. It has very little to no airflow at the HDD bay areas and this case is know for killing hard-drives. When I took of the motherboard trey I immediately saw why. The hot-swap bay have only small air holes at the sides and not at the top plus that the hard-disks is on top of each other very close without any fans to blow air. The other hard-drive tray is a little better as it at least have mounts for two 80mm fans. Don`t even think about mounting hard-drives other than SSD in this without mounting cooling fans first, your drives WILL overheat and die slowly if you do*. Besides the major flaw with HDD cooling the HAF XB have potential to become one of the best cases there is with a little modification and this case is really easy to modify. I have removed the side panels and put 14cm fans at top there instead and 12cm fans downstairs to blow at the hard-drives (did also removed the hdd tray and mount the drives standing up at the bottom of case). I also have a 200mm fan at the top and that fan really helps get the heat from my Zotac GTX980ti AMP out of the case. Temperatures when running GTA V benhmark is 55C at the graphics card max overclocked and 38C at my i7 4790k CPU at stock speed with Schyte Ninja 3 cooler. Thees temperatures is really impressive specially for the graphics card, my GTX980ti gets a lot hotter when I run it in a open testbed. *This summer one of my passively cooled 750gb drives died at 32Celcius ambient and that one was mounted in an open case alone with no other drives near. My 3 other drives was also really hot about 50 -60 Cecius (burnt my fingers) on the outer case but they survived. I learned my lesson, conventional spinning type hard-drives need active cooling or they get really hot and die. At normal ambient room temperature of 24C my hard-drives did not get more than 42C, problems only arose when it got hot in the summer and for some reason the HDD`s got much hotter when it got a little warmer.
@Ungstrup898 жыл бұрын
+Rondo Cat Can you make a video or take some pictures of your rig so we can see how it is setup with the cooling for the HDD's :) Would really appreciate it, thanks for the info so far
@a647388 жыл бұрын
***** I am now waiting for six 14cm and three 12cm Noctua fans. I will think about manking a video or taking pictures of the setup when I mount those.
@Ungstrup898 жыл бұрын
Thank you so much :-)
@johncastille88497 жыл бұрын
So it's recommended NOT to get this case?
@a647387 жыл бұрын
Hunter Domingue It is a very good case specially if you modify it just a little bit for even better airflow :) That is why I did buy it myself as I saw the potential it had for great airflow specially to air-cooled CPU and GPU.
@duramirez3 жыл бұрын
This case is AMAZING, i love this design it totally fits my needs.
@samiam90594 жыл бұрын
Use it and modified it for even more cool. Once you get used to the huge size, you realize can do almost anything with it. Installed a noctua 200mm on the top blowing into the case. Use an alphacool 280mm in front and an arctic 140mm blowing into the case in the rear. The two feed the cooler for front exhaust. A small fan for the drive cage in the rear bottom. Zalman speed controller for the 200mm. Removed the honeycomb plastic in front and only have the first screen removing the fine one behind it. Very quiet 90% at 89 degrees for an I9. Some games wind it up but not loud like an air cooler. The Alphacool wants a horizonal mount so this works perfect. Removed the raid array box but the front rails still snap in as if it is there for better room inside and ventilation.
@IBeforeAExceptAfterK4 жыл бұрын
Bought one of these about a month ago. It was love at first sight.
@kylequinn19633 жыл бұрын
2021 and I'm gonna be buying one of these for a server build. Looks epic.
@FerralVideo3 жыл бұрын
I'm actively considering one of these. In late 2020. This case is forever.
@Handle_number_74 жыл бұрын
I've had the HAF 932 for over 11 years. Just decided to buy HAF XB. I wasn't keen about spending $110 on a second case. But it's form factor (under 17 inch depth) was perfect for my entertainment stand. I intend on making this my HTPC+, and my other build a great file server. Having had an excellent experience with the big brother HAF, this really didn't take much thought on my part lol
@asfcruppy63823 жыл бұрын
I was looking to get this case for a VR rig to put in my entertainment room, amazed to find a video done by Linus from so long ago.
@animalRIP11 жыл бұрын
Hey everyone, I personally own this HAF XB case and It is GREAT! 1st, it's very spacious and as mentioned it can easily support a dual rad and 1 single in the back. Now, I often travel 1 city over to visit my cousin, via public transit, and I actually bring it with me every time :) When traveling, I unplug ALL of the accessories, put them in a back pack or smaller duffle bag, and throw the PC back in the box with the Styrofoam. Arrives safe every time. I use all fan spots and it's GREAT air flow
@little_fluffy_clouds2 жыл бұрын
It's 2021 and I'm thinking of buying one of these cases to use as my media server. What a practical design which is more useful than the current cases. Love the dual-chamber design, the protruding PSU cage, the carrying handles and the ventilation holes everywhere for unimpeded airflow. I don't care about USB-C ports on the front, so this'll work great.jj
@daytonkim68653 жыл бұрын
Just bought this case because of this review and wanted something sturdy and different. Since I move between houses a lot I hope his works for me.
@raider76211 жыл бұрын
There are some really good 2 5.25" reservoir/pump combos out there for water cooling. Plus most operating systems still come on a disk or need to be put on a disk and then from the disk to a usb drive.
@eskil79033 жыл бұрын
im still using this case to this day on my pc
@syncmonism5 жыл бұрын
7 years later, NCIX doesn't exist anymore, but the case is still selling, and still compares well to contemporary cases.
@bland98764 жыл бұрын
AND linus (the guy talking) is thinking of retiring from making video
@DatGweenKitteh11 жыл бұрын
I have been looking at this case for quite some time, and decided to look it up on youtube. I tell you what, this thing is a beast! It may not look exactly like every other case, but it is a great piece considering it's price!
@LinusTechTips11 жыл бұрын
Shipping would cost a fortune for review samples. More than the items themselves a lot of the time. The prize for the Duke Nukem contest cost over $400 to ship to the UK. The obvious solution might seem to be "limit the regions you give them away in", but honestly it's not worth it. If I limit the region for a giveaway, the amount of complaining I get takes the spirit of giving out of me...
@ShapdCrusadr2 жыл бұрын
I own the HAF XB EVO version of it and reuse the case for each build and like it cause the motherboard lays down. Since owning the case it had a total of 3 systems built inside it and currently using the 3rd now. The current rig inside the case is a Asus ROG STRIX Z390-E GAMING motherboard & Intel i7-8700. Bought the motherboard & processor used for $50 dollars just day ago which is a nice upgrade for me compare what I was using. Even after being released years ago both the HAF XB & HAF XB EVO are still nice cases to build a system in. That case is built like a tank and you can MOD the heck out of it and if you don't believe me search google.
@caleb8659 Жыл бұрын
The horizontal motherboard is amazing for today's heavyweight GPUs
@ShapdCrusadr Жыл бұрын
@@caleb8659 Yea, Awesome case but there is no way a GPU with 3 fans would fit.
@emike09 Жыл бұрын
Still rocking my HAF Evo XB for about 8 years. I wish they'd refresh it once more to be a big more compatible with large 4000 series cards in conjunction with a 240mm CPU radiator.
@TheMegalodonGaming3 жыл бұрын
My EVO refresh of this case is still going strong. I'm going to reuse it for my new Ryzen 7 build and the lack Hard Drive space is such an outdated problem with M.2 being the future. I was unsure about this case 5 years ago but I'm so glad I bought it and kept it in good condition. I was even able to fit a 240m radiator in the front in a push/pull for 4 years using one of the longest graphics cards on the market, a Gigabyte Tripple fan R9 290X.
@MrDrainDoc11 жыл бұрын
I have never ever been a fan of these types of cube style cases..............but I think I Really, Really like this case! I like so much I think I am seriously going to do my next build with it. Thanks Linus for yet again another great unboxing! Peace!
@ForestShroom11 жыл бұрын
Linus pretty much gets to have Christmas 3 times a week in the form of unboxing videos, this makes me incredibly envious. ;3
@44R0Ndin10 жыл бұрын
I just got one of these myself. I'm putting in an Asus Rampage IV Black Edition with an i7-4930K and Gb of ram. I'm very impressed with the build quality. You could say its built like a... Black Box. Yeah, I'll go home now.
@ChizFri3 жыл бұрын
Watching this in 2020, my god how far they've come. I'm seriously considering this case, too.
@Bio_Synthetic_Organism4 жыл бұрын
Very future proof esp with all the custom watercooling options. By today's standard that it only has 2x3.5" drives is no concern with cloud and NAS options out there. Coller Master obviously had a crystal ball. The case can also be modified in so many ways so for someone who likes to upgrade or tinker lots, this is the case to use :D It is a little bulky given it's footprint but in the right setting is just magical!
@GickelsGaming3 жыл бұрын
Still using mine in late 2020. Went from a 2500k, to a 3770, to a 3770k, to a 6700k, to a 9700k all in this case. I've used two AIO's the whole time, and the same 280mm AIO on the inside, venting to the top vent since 3770k and am running 4.9ghz stable on my 9700k 2070 RTX duo fan card, I've ran the same DVD drive and Fan controller with the original red fans i've had in it from the start. I've also got a red CRT illuminating the whole case. I've got two M.2's, two HDD's and three SSD's This case is phenomenal. not a dent, not a scratch, even though the metal is probably 1/8th inch pot metal, the engineers had the case bent in a great way and is structurally S O U N D. I've taken this case PLENTY of places, and is still basically perfect. Best case there will ever be.
@MrDrainDoc11 жыл бұрын
Absolutley!!! I just bought not only the case but the new H100i. I'm Geekin out man!!!
@monsterhunter4453 жыл бұрын
Happy to see this here on Ltt building a beastly NAS+plex using unraid
@archioss44913 жыл бұрын
8 year later, i will use it for my new 32gb, rtx 3070 and ryzen 9 3950x build my favorite case of all time
@TheKungFung9 ай бұрын
Great breakdown of this case. I'm a new builder and have a lot to learn.... and I learned a good bit from this video! I just got this case new and am going to put a rad computer together with it.
@borisarchful7 ай бұрын
hi man i have this case since 2015 and now i am building a watercooling setup using it. give me an email to send you some pictures after i finish it sunday!!
@smartass23t11 жыл бұрын
I really like the aesthetics of that case
@aseroxmilez11 жыл бұрын
i love cases that allow the MB to be layed flat face up, i built a gaming rig with the bitfenix prodigy and love it.
@DJCrAzYGuYTube2 жыл бұрын
It's already 2022!?!, and this case is going to have a new home in southern Canada.
@JamesT655 жыл бұрын
I bought this case a few years ago and it’s awesome. I7 9700k, ROG Strix z390 -F Gaming castle 280 RGB cooler, 32 gig tridentz 3000 ram, Samsung evo 500gig boot 4 terabytes storage, silverstone gold 1200 psi. Blue Ray M drive. So easy to build and rebuild with it.
@Shahkakon3 жыл бұрын
love this case, very happy with it even in 2021 with fresh components
@wyzemann11 жыл бұрын
This is the first Cooler Master case since the Storm Styker that I truly lust for. I definitely foresee this case in one of my numerous future builds. Thank You Linus for an in depth and sincere unboxing!
@ikaruga2411 жыл бұрын
Already ordered mine, it just looks so good. I was looking for a good chasis for quite a while but nothing really picked my fancy until i saw this one. Instantly ordered it the moment i got my hands on some extra money.
@ImCastorTroy4511 жыл бұрын
dam...aside from the 3.5 bays this case has it all. Linus also looked pretty stoked for this case. thanks for the video..ordered mine yesterday
@MrDrainDoc11 жыл бұрын
I could not agree more. I was geekin out so hard, I bought it about 2 hrs. ago.
@CPRcomputersDirect10 жыл бұрын
I just ordered one of these for my own personal media center. I'm a huge fan of Cooler Master. Great review!
@SuperiorSaint11 жыл бұрын
As always Linus, thank you for never failing to make my day. Everyday after I come home from work, I turn on my PC and look at your new uploads while eating Subway. Very informative and very entertaining to watch all your latest videos. This is nerd pron for me. Yes, nerd pron. Just finished watching this video, now to enjoy the rest of the day by gaming. Thank you Linus.
@ObserveJeremiah11 жыл бұрын
May pickup this case to use as my testing bench. Great setup for easy access. Great video like always.
@yuvarajvelmuruganmudaliyar3 жыл бұрын
I bought it for my brother. The case is strong and spacious. But one issue I see is with the front panel's fan fitting. The case by default has two 120mm 3 pin fan's which could have been avoided and reduced its cost, so user could buy whatever fan they need. If I replace it with a 140mm pwm 4 pin fan's, the place holder is hidding the wings of the fan a little. An entire circle of the fan is not visible.
@kevinmorales99423 жыл бұрын
0:01 This ist probably the best intro he ever used.
@DafuqGamerz11 жыл бұрын
recently bought this case... and its every bit as awesome as you've commented. by far the best case ive ever had. air flow is great, built like a tank, high end videocards (huge AMD7970) fits easily, as does my huge cpu cooler (Xigmatek Aegir). price was 90$ and its worth every penny. if i were to hypercriticize i would say the included fans are noisy and i plan to replace them but i never notice when im fragging chumps ;)
@jamiemccue91213 жыл бұрын
August 2021, looking at Linus now and then watching this, almost two completely different people
@simroz825311 жыл бұрын
This case fits HEAPS... I got 3x7970's but it also supports water cooling. It says 240mm rad on front but will take a thin (30mm) 280mm with 25mm push & pull config fans plus a 120mm on the back. These are sweet cases...
@offspringthing4811 жыл бұрын
Linus you should do a video on a possible build in this case. I'm very interested to see how it would look fully built.
@101Us6 жыл бұрын
I know this video is 6 years old but I’m still going to buy one
@flplps55146 жыл бұрын
Tyler Gutto same here,for a mini itx build,a 240mm watercooling aio for my rx vega 64 plus a 120mm watercooling aio for my intel i5 8400,crazy I know,but for me silence is king.
@ChromeTusk11 жыл бұрын
Thanks for the un-boxing; it gave me a good view of the size of the case. The only things I did not like about the case were the dedicated 2.5 inch [SSD] cage and rear dual 80mm fan mounts. Support for 3.5 inch drives would be better for storage; dual 120mm mounts in the rear wouls add potential for water cooling.
@dacasman11 жыл бұрын
same here, everyone was complaining about the volume being too quite though.
@matthewrandell50556 жыл бұрын
I'm building my first ever PC and honestly just found this video wanting to see how big it looked as I couldn't find the dimensions on part picker. I was blown away by the information in this video though. Obviously it being my first build and me not having a computery background I understood very little but hopefully I'll be able to come back to these in years to come as I learn and upgrade my computer
@OG-Jakey11 жыл бұрын
no u cant convert the 2.5" drive bay to 3.5" but u can convert the 5.25" bay to 3.5" which is where u would usually put your dvd drive.
@ZoruaZorroark4 жыл бұрын
when one looks for a high air flow case to help keep an amd 5700xt cool and cooler master haf cases is the first thing that came to mind
@damonwilliams20123 жыл бұрын
talking about that packing material always thought that was a nice touch
@34ccsn4 жыл бұрын
I'm doing a new build in the HAF XB EVO. Love it
@dvfer44411 жыл бұрын
just got mine! bigger than I thought it would be... full steel, solid as hell. I bought it for LAN party! just case itself already kinda heavy... but with good handles. I might get some extra fans but might wait and see first... awesome review BTW.
@tehw00tnessftw11 жыл бұрын
holy crap... I like this case. Cooler Master made another awesome case.
@MainManMilez10 жыл бұрын
I'd LOVE to build in one of these. Looking for something that portable but that can still hold my ATX motherboard.
@Tro108611 жыл бұрын
I agree, should of just brought the entire back of the case out flush with the PSU mounting. Would of given more depth for longer GFX cards and mounting a thick rad/push-pull fans in the front two 120mm locations.