Cooler Master TD500 Mesh V2 Build - Step by Step Guide

[@Djirkali]

Apart from being incredibly informative (which they are, they are the best how to build vid's on KZbin) your voice is just so relaxing, its almost ASMR pc building. Thanks Chris love the channel

[@MartinAbrams-h5d]

I've just bought the case and about to buy the rest of the gear. I will make the PC next month. I haven't built a PC for 20 years, the XP at the time. I think I've watched your video three times and definitely when I am building the PC, I'll have it on again. I like the way you make it very clear. Cheers.

[@napoficial7123]

Just ordered this cage because money and this tutorial! Thank you very!

[@napoficial7123]

Nobody ask you! See, not even a like in your comment 😂

[@PHiLaVaNiLa]

I love watching your videos man, super relaxed and very informative! Also always jealous of all the builds you get to make!

[@CatPurson]

Nice vid, I'm about to build my pc with this case, and the last time I built one was 15 years ago, this was nice refresher.

[@nedandre1584]

Best and most detailed explanation of a build I've seen good job and thank you learned what I needed from this to get mine to work

[@hananexcalibur]

A build in this case is always so beautiful

[@cyberluk3]

I purchased a brand new PC in 2022, and this case was included in the build. I was "smart" enough to replace it with a Svive Halo S650 Midi tower before they shipped it, and I regret it ever since I got the PC.

[@milanjovanovic4744]

Underrated channel, thanks for this guide

[@Vinch22]

Another fantastic step by step guide Chris. Keep it up💪

[@IAMNOTRANA]

And people say black GPU don't look good in white build.

[@exot1c_dark066]

cause it doesn’t 😂

[@3katd]

@@exot1c_dark066does too

[@stebrad123]

Excellent presentation Chris. I've got a similar build to do on the weekend

[@fenwayandwrigley]

Excellent build. I really enjoy these videos

[@adamhearts9195]

thanks for the walk through,,, excellent build. I'm doing one in this same exact case and really found the installation helpful 🎉

[@adamhearts9195]

ughhhh, my td500 top lid will not come off, the screw holes are there but they are not used. instead theirs rivets in the surrounding areas. 😢 no idea where this 280mm x63 is going to go,,, I guess the front..

[@ravizvisualization]

Thinks for this video! only your video was able to help me

[@deepak-ui5li]

Wow what a great build video

[@Nite-Lite-Gamers]

Great explanation of all aspects of the build even dow to 3 pin vs 4 pin fan headers.......

[@galog333f5]

thanks you helped me a lot! Very usefull! I couldve done a lot of things wrong without this video.. :)

[@ElCidPhysics90]

Been watching your videos for the last week. They are impressive. I’m about to build my first pc. I have the TD500 mesh and the x470 motherboard. How do I connect the argb front fans to the motherboard? The x470 has only rgb not argb.

[@lovelylune3]

I've got a case like this and have clicked the RGB button on top and it does nothing. Can someone tell me why it's not doing anything and what the lights are supposed to look like from clicking that button?

[@petpan82]

another high quality video, great job

[@ΓιάννηςΧατζηγεωργίου-θ9σ]

Another quality build Chris, very well done pal!! I have noticed that lately on your builds, you prefer the exaust option for the AIO while previously you were more kean to have it as an intake especially with mesh panel cases. Is there a reason behind this change? You prefer to provide more cool air to the gpu in order to keep it cool and having the cpu running a bit hotter? Do you consider it a balanced compromise since the new GPUs are running hotter? Thank you again for the video.

[@medhammamchebel8605]

My OCD likes these videos

[@wewjad]

Very detailed and informative. Thank you. 😊👍

[@ChandanParihar87]

Hi Chris, which software you use to control RGB on case .

[@MikeBob2023]

Another great build! 👍

[@zugre]

what fan do u use on the rear?

[@bradenhobbs1790]

Awesome video and very informative! Are you concerned with the total number of exhaust fans being more than the intake fans?

[@S4m4ntha_999]

I will try this soon ☺️☺️

[@GUCFan]

You removed the HDD cage but should i get this case and keep it since i have a 8TB HDD for storing games i don't play actively, does the cage impairs modular power supply cables?

[@nikknukem7125]

Hey Christopher, that was a very nice video. I do have a question regarding the GPU adapter. I am planning to get an 4070ti (idk the version yet, probably the white TUF) and I also want the lian li strimer plus. My question on this is after I plug the 2 pcie 8 pins to the adapter of the gpu, can I then use the 12 pin strimer to connect the GPU with the adapter?

[@gorgiarsov]

Verry good pc build you helped me allot.

[@Antoniobaldes-sk8gl]

Great. A question. Should the 3 pin cable of the fun hub, precisely the one at 5.38, be connected to the motherboard or not? And what is it for? Thank you

[@MrRobatoTomato]

Great video! My PSU doesn't have a USB cable, do I need one?

[@dekamondclip]

Tanx bro I build my td500 with your video 🫶✨🤝

[@al-islaam]

Dont you need to connect the SATA cable from the case ? Thanks

[@ivkotooo]

Hey, i just swapped my old case for this one and i connected my exhaust RGB fan PWM cable to my motherboard and the RGB to the extension cable from the fan console like the way you did but it doesn‘t light up. Any solutions? Thanks in advance. Great video by the way! :)

[@n64slayer]

Does this collect a lot of dust because I have an aio cooler int the same config and it seems that it has severely bad negative pressure leading to a lot of dust build up

[@thomasenright5282]

One thing I want to ask you not certain you would have a answer for this but if anyone can help with this I would be grateful for any advice I can. I got a AMD Radeon, Sapphire Toxic RX 6900 XT but it didn't come with a three pin connector that you can use with the graphics card and the motherboard could you tell me where I can get one to use for it.

[@tailung6334]

Total weight of your cabinet after build bro ???

[@xNULNULx]

is it compatible with the Corsair RM750x SHIFT?

[@Patriota_Rhone]

Hello. If I buy a Noctua NH-D15, can I fit it into this case? thank you.

[@CoolCraig31]

Can you change the rgb through software if you plug in the argb connector to the controller on the back or does it need to be connected directly to the motherboard?

[@MrMartis913]

Would I be able to use a Razer RGB controller in lieu of the case's controller so I can sync all my RGBs through Synapse?

[@abhishekbharti4857]

When you unplugged the argb headers from the motherboard were you able to use the software to make changes in rgb ? I have yhe same cabinet and my pins are also connected to the motherboard. I want the buttons to function but i don't want to lose the control through software. Please advice. Thanks

[@Ccortanaa]

Can anyone recommend a good alternative to the thick, bulky tri-connectors that come with the 4080 Super? After installing my GPU and then the tri-connector that comes with it, the lid doesn't shut because you can't bend the OEM tri one. Something that's highly rated and can bend easier?

[@SaruBiatch]

the thing with the rgb button and motherboard is the only reason I am not sure if go for this case

[@sargeantstreamz]

Would a coolermaster ML280mm mirror aio fit on the top of this case?!

[@bilge677]

for some reason my motherboard (X670E-F from ASUS) doesn't detect the ARGB Gen2 as being plugged in so I can't control the RGB. Has anyone else had this issue?

[@jdflowz450]

How do you get a static color when i select red for example with the case button the red color is only pulse mode so it fades not static?

[@peacegamer22]

Amazing

[@EEFFYIE2]

¿What if my motherboard does'nt have USB 3.1 plug? ¿It is important?

[@JosePto]

Hi Christopher! I will be on AM4 for a few years more and I'm struggling to decide. I have a 3060 Ti, I don't play games that often (but I like smooth gaming at 1080, I can't do higher resolution at high refresh rates) and a 3700X. My options are: 1. 5700X for 210€. Runs cool and boosts up to 4.6 GHz. 2. 5800X for 250€. Runs hot but boosts higher, performance improvements in games is marginal. 3. 5800X3D for 370€. Runs hot, boosts the lowest, performance in games might not be worth the cost using a 3060Ti. What would you do?

[@cyndro]

I dont have that usb c connector on my motherboard. Is this an issue, will there be any problems in the future

[@MiracleManGaming]

For cleaning how do we manage with cable management again?

[@kakal33]

nice build 👍

[@hassangammudi3212]

My motherboard MSI H610M-E it got 4 pin rgb header

[@hectordavidalejandrojimene3078]

If my power suply doesn't have the usb conector it doesn't matter?

[@aboodymoin]

how can u change the rgb lights from the reset button ?

[@houzid1322]

Is the airflow good in this case? U have 3 fans that blows the air inside and 4 out, it seems like negative airflow. Am considering the case for my build but need to be sure about the airflow in it. So any help with my question and am more than thankful.

[@Fiufsciak]

The back one isn't included, you don't have to force it if you're afraid of that. I myself am going with the built-in 3 fans from the front, and a 360mm radiator on the top, just like in the vid. I believe it'll be sufficient, time will tell.

[@Charlie-d4m]

my button that changes the rgb isnt working. idk how to fix it

[@threadder0076]

Thanksss a ton

[@thomasenright5282]

I hope you don't mind me asking, but two things would not need a bigger power supply for this build I mean to say your only using a 750. Second one are you having any problems with the 4070 as I head that the new models are causing nothing but problems.

[@nolyfe4814]

Heard the same thing. Gigibyte cards are breaking. Msi’s version runs hotter then the other ones. I’m not too sure about the other models but no one’s seem to have problems with asus cards so I’m shooting for that myself. I’m gettin the 4070 one and a 4000d airflow. It’s cheaper and just as good as the cooler master

[@knightwik]

Mr F. (Flannigan) i like your funny name xD

[@DetaiIist]

I have a question can noctua nh d15s cooler fit this case?

[@Riza_Fire7]

Is the PC still silent or how loud can he get?

[@ScottyD910]

Where can you purchase the V2 option in America?

[@LonerJoe]

I cant find a V2 in the US.. newegg or amazon

[@FelipeJardini-v9g]

I think I would go for a 850 watts power suply tho

[@rr6sgaming333]

What is this headphone holder??

[@3katd]

I had to order an rgb hub because of the pins.

[@Matty10096]

Come si impostano i led delle ventole in modalità fissa?

[@rookandpawn]

i still dont know how to install the hard drives

[@Key-01184]

My front fans are making a lot of noice.

[@Ladioz]

I love that there is no gpu sag!

[@Synonomous]

Creator doesn't answer questions so I guess I won't ask him one....