Coolest Caterpillar Tool Boxes Ever

www.jpaydirt.com/
I get another tool box! @25:26 then I Clean the Magnetic filters on the 14G and then We'll go take a look at a D9H for sale, should I buy it?
the Wabcos are done and ready to go to work

[@curtismoore6387]

I cant get over how nice of a shop you have.

[@lordsebastian4136]

Toolbox starts at 24:30 (you're welcome!)

[@WatchWesWork]

Those pre STC Cummins always smoke horribly at idle. On trucks with stacks you can often see fuel pouring out the exhaust clamps if you let them idle too long.

[@Bushguyrocks]

To all you viewers, you know the best part of Jeffs videos? Comments section. Everybody pitching in to help and give good advice. Lot of good people in this world. Don't forget to give him the thumbs up. 👍

[@Jpaydirt]

I love you Ron

[@iusetano]

One of the best video channels out there. Excellent Jeff.

[@cliffordanders6678]

Thank you Jay I a old man now and I been running equipment for some 54 years now. You show me things I have forgotten over time. I have some old equipment now that I just work on small farms now. I have a loader that's cat 950E and every time I think I winning it braked down. But that's the life. Have a great day.

[@Bushguyrocks]

Back when me and my grand-dad was kids it rained more than you ever seen. The lake rose so fast that 3 ducks drowned.

[@joesmith3162]

Really enjoyed you’re inspection of the dozer. I know nothing about this stuff but I’m fascinated with big dozers. Love the videos. Hello from hot muggy Toronto

[@FishFind3000]

Joe smith yep, me too.

[@mmccoy577]

I like the way you think.When you buy a piece of equipment and go through yourself. You know what you have.

[@Jpaydirt]

Down time just sucks the cash flow right out of a guy

[@jimzivny1554]

Yahoo! Another project, that means lots more vids.

[@billyjoeekers5903]

Offer 18,000,good ol tractors grew up on one,never heard of that ripper ,love your videos my 10yr old wants to be a cat mechanic so he loves watching ,thanks for sharing!

[@Jpaydirt]

Has he asked you if Jpaydirt knows all the swear words yet☻

[@canvids1]

Who needs to watch movies on tv just tune in for real interesting movie from Jaypaydirt. a real treat today 34 minutes. thanks Jeff your videos are always very interesting.

[@TimberTramp]

Fwd to 25:00 to start the toolbox (as the title states)

[@jackwilbur9419]

Timber Tramp thank you

[@ConstructionMachinesChannel]

Would love to see all the videos fixing up that D9 would bring. Hopefully it happens 🤞

[@Farmall450]

Nice looking box!

[@jakestabile7027]

Great stuff on this channel! I would rather rebuild the old Cat dozer for around $25k than purchase a DEF guzzling tier 6 new Cat equivalent model for $250k.

[@Junkyardmethod]

Scrap price is all I’d offer. Lots of work to make it a solid machine. I know you can handle it! Get it bought and I’ll vacation up there and help you with the teardown and evaluation :-)

[@joeybarth3121]

New to this channel and I must say this is one of the best channels on you tube just could not stop watching!!! I am a CAT mechanic and work on lots of KW at work when shop needs help so this channel is like what I would have if I had a channel... keep it up and I'll keep watching brother

[@Jpaydirt]

Awesome, where are you located, if I can ask, which I just did, or can you say?

[@joeybarth3121]

Fort Worth work in dallas I loved in West Virginia till 5 years ago worked in coal mines till shut down

[@EucPete]

Hi! Time to leave a little note... Regarding that ripper on the D9 I have a video from the -70s i think and that CRC is the company who owned/manufactured Kelly rippers they're from Texas if I remember correctly! /Peter PS: I have some videos here on KZbin also... Peter Sjögren , or catoperator61 DS

[@danielsprowl1998]

That dozer is really done in. I definitely would offer scrap value. As for the Ripper. I think CRC and Kelly are one of the same. Beautiful toolboxes. Be safe.

[@maplemanz]

I don’t know if you knew this ,one of the improvements made to the D9H from the G was a pinned equalizer bar,this is good because it pins the ends of the bar instead of just resting on it like the G restraining any lateral movement of the Track frames,which helps keep final drives gears and bearings aligned .

[@cliffordanders6678]

I down in Panama and on my little company now I enjoy your videos. Some help me to remember back when I was a young man up in Texas and the good time and bad time we had with equipment. Lol

[@Blockloading]

We use our pressure washer to clean mag filters the screen and the magnet, works awesome.

[@letsdig18]

ok Im done for the day the hell with it, hahah I was like man i bet that took forever to dig with that lil bucket!

[@Jpaydirt]

Don't know how you stand running one, it's like stuffing cotton balls in asprin bottles

[@wayneboulier1113]

Hi Jeff I used to sell Craftsman tool boxes i like your Caterpillar box nice choice That other dozer needs a lot of TLC good luck still enjoying your videos they started planting potatoes here about two weeks ago

[@Jpaydirt]

Taters are up this week

[@wayneboulier1113]

They will be cultivating them in a couple weeks here broccoli is being planted now

[@ThePeterbiltrucker]

On the old dozer I’d have to offer scrap + core worth of motor, keep up good work

[@Angus762]

Greetings from South Africa Jeff. Province of Kwa Zulu Natal ,Capital city of Pietermaritzburg. Your videos bring back good memories. I'm a CAT trained artisan but as you well know there are plenty of other makes of equipment in construction. I've done a few years of marine work 353, 379,398. We had Oshkosh trucks here E and F series mainly. As an apprentice I cut my teeth on 977's and D9G. What they now call "vintage" machines . Keep up with the great vids.

[@lesflynn4455]

Those tool boxes are the coolest I've ever seen. I love how Jeff insulted it by putting a Ryobi drill in one of them. I know Jeff understands. He hates Ryobi too.

[@davidcoyote8921]

Nice kick/electric Ironhead in the background...

[@jiml9971]

I love your channel ! I have learned tons thank you keep up the great work !!!!

[@marktucker5837]

Cat tools are cool and tool boxes

[@Gman77100]

Yes titan tires made in the US they have a plan in the Des Moines Iowa

[@ricardovalentin2410]

I love that you chose the Bonanza song intro for your video👍😎

[@Moo01100]

And... we have a tradition of cab-over prime movers in Australia... goes back to the old days of Fodens, Commers and Internationals. The KW 200 cab-over is a staple of the Oz highway - especially for line haul. It just looks right at home on a two lane ozzie highways.

[@4554dy]

Also has much to do with the length limits in Australia which explains the short wheel base specs on COEs and especially conventional cabs. East coast is very tough on length limits. You'll never see a car hauler with any loaded vehicle sitting /hanging past the end of a trailer.

[@gasperajdnik5627]

You have good videos 👍

[@paintedblue1791]

You can deal with the shavings in the filter magnet by 1) Get a high power magnet. 2) Put it in a plastic bag 3) Use it to draw off the metal shavings. 4 ) Turn the bag inside out and throw the bag way with the metal shavings inside!

[@alisterlockland2357]

Roses are red Violet's aren't blue I came for the toolboxes And got jipped just like you

[@CRice-ln8lm]

Duxseal was a brand name, now generically duct seal. It is a very stiff gooey stuff that should pull the metal off the magnet with no residue left.

[@cyberhornthedragon]

before ya said 20 i was 15 i saw a couple cracked welds that will need grinding an rewelding

[@Campminivan]

That is good heavy melt,but they will discount it to cut it up ...$40 ton in Boise

[@kathyphillips5692]

Awesome toolbox like too find out more

[@chriscreech716]

another great video titans are the best farm tractor tires like the magnetic filter setup have a good week

[@advancednutritioninc908]

I have a lot of respect for what you do! A man of many skills and yet humble and tells it like it is! Thanks for your videos!! Liked! Subbed!! Jim Coyle - Georgia :)

[@FishFind3000]

Scrap value plus what ever good parts are there that you can use on yours.

[@johnroberts5740]

John Roberts Pocatello Enjoy your shows. I work for an Engineering Company and been involved with lots of construction.

[@glennhunter7018]

Good video I am still watching them I have not commenting in A long time but I am still watch your videos they are good

[@waynecompton7612]

Good morning Jeff I would say perhaps between $10.000-$12.000 !!!!!!! Considering the work etc Take Care 😎👍🇬🇧.

[@LoggerWade]

Awesome job bud your stuff is great I learn every vid

[@seanfalter9903]

Awesome, thanks for the shout out! I don't know Jeff but that d9 your looking at I don't know if I would go over 14-16k for it the way it sits, they are awesome tractors though as you very well know! Great content and video, best of luck on your next jpaydirt d9!

[@marhuf]

Hey Jeff, buying Titan tires is great news. I live in Bryan Ohio where they make the off the road tires.

[@Jpaydirt]

What do you think of them

[@marhuf]

I haven't heard any complaints about them, so I gather that they must be pretty good.

[@EdStrong929]

So you owned a Mack truck...? Any videos or pictures of it you could show? I love Mack trucks. I hope you buy the D9H and start a new video series on the restoration process.

[@rod5262]

Hi Jeff, Rod from Australia. Have really enjoyed your videos , particularly the ones to do with the switchblade on the truck. Your pressure testing on the road is something I have never seen. Buying the H would be good for us subscribers as we would learn a lot from the extensive overhauling that wil be needed, a path that I have already been down. D9 G and H are iconic machines and to run them successfully I think you need to understand the workings of them well.

[@hankclingingsmith8707]

4500.00 is my bid. Why pay to much who else wants it,a lot of work and PARTS needed.

[@woodman3651]

Hi Jeff, those are some cool tool boxes. I don’t play in the dirt like you, but my job puts me in a heavy duty tow truck in New Jersey hauling broke down and wrecked trucks off the highway. Love your videos keep them coming. Terry

[@Jpaydirt]

Be careful Terrence, that job sounds very dangerous

[@aaronjarvenpa1743]

I say right around what you said

[@catdieselpower193]

I ask all of The boss mans viewers! Is this not the best of channels on! KZbin of this great man livein his dream? Oh and the Dozer buddy at best 12Grand and a handshake she's fine but needs a bunch of TLC but! I know the boys that can do it! ;-) Awesome vid Boss Man!

[@vincentnightwolf]

I really want to pick up one or two of those boxes, they look awesome. Hopefully they will get the site going soon so you can let us know where to get them.

[@clydeacor1911]

I would probably start really low on price for that D9. You can always go up on price but not down. and like you said there's going to be a lot of parts and labor! even with your own shop you still have to figure that your labor is worth as much as any other shop! honestly I would start out at scrap price and go from there. you might end up like me, buy a dozer with only 500 hours on a engine overhaul then rebuild the transmission, rebuild the undercarriage, fix everything else and just as everything is all new and fixed the engine throws a rod out the side of the block making a hole the size of your head!

[@1234cdsarver]

I enjoyed your video on the tools I would like to see more thank you

[@smoki2515]

I know it's not a good comparison, but I have a no longer made, 2008 Montana compact tractor 28 HP and it has Titan tires on it (OEM). They wear like iron and I don't park it out in the sun at all and they seem to be fine. No side cracking at all and the tread is almost brand new. Hope that helps about the tire brand. They are probably all the same in quality no matter what the size. I found out long time ago junk is junk. Like your channel.

[@Jpaydirt]

Thanks George, what is a Montana compact tractor

[@smoki2515]

A company named Montana back in late 2009 stopped making compact farm tractors. Another company called LS Tractor bought them out. They still make compact tractors today and full size tractors in Arkansas. My tractor a 2006 Montana 2740 model 4 wheel drive with 16 forward gears and 8 in reverse,and came with a front end loader, live hydraulics in the rear and can be used as a compact farm tractor. We have 3 horses on acreage and use it all the time for various tasks. It came from the factory with Titan tires on the front and rear. They are agriculture type tires but I think made by the same company you were referring in your video. The Titan's my tractor on it have been very good even in mud. Very good quality.

[@dallasloken5278]

A 1973 D8h sold this spring in Minnesota with a winch but no dozer for 20,000. Undercarriage was about 70 percent

[@Jpaydirt]

i would love an old 46A

[@d6joe]

Titian farm tires have a vary poor rep. I hope industrial is better.

[@Jpaydirt]

www.tractionnews.com/titan-is-swapping-out-farm-tire-for-unhappy-customers/

[@anthonymarks120]

Jeff you should not get down on you grader magnetic strainer for the transmission it does a great job of filtration , keeps all that crap from floating around and trashing you trans.. Grader transmissions are not cheap to rebuilt , or if you do it yourself it`s no easy task .

[@Jpaydirt]

I don't think I was down on them, they are awesome and they do a great job

[@hvy1ton]

Did you miss out on the 20" of rain they got around Idaho Falls 3-4 years ago? There was water running over the roads out in the desert. Ruined everyone's barely and hay.

[@Jpaydirt]

Actually in one of my videos I was out running the whore when that hit, what was that 2 or 3 years ago

[@hvy1ton]

I think it was 4 years ago.I know I flew home for a funeral. It was raining when i left and still raining when i got back. All the balers and combines looked like they were on fire with the plumes of black mold.

[@waynep343]

on the tool box pair.. i might put a pair of hinges where your hand is @28:05 so you could have them side by side or perhaps back to back.. by just unlatching something low up front. see if that might work out by rotating them and see if that would come in handy when between pieces of equipment. the D9H would be one heck of a long term fairly expensive project. but you are totally right about needing a spare. rain.. are you aware that intense storms can be caused by the ash particles from fires hundreds or a thousands of miles up wind.. moisture needs particles of just the right size to create rain drops.. if you look at the tornado outbreaks farther east.. you will note that there were major fires on the west coast and Canada.. even the super fine volcanic ash can create clouds and rain when it runs into a cold front laden with moisture.. as for the flooding in your garage and in your house.. well.. it would be handy if you knew anybody with earth movers.. since you can't easily raise the house or garage.. you can lower and put some grade in the areas around them preventing rain and light flooding to become an issue.. my great grandfather built a house in New Orleans.. he built it on a pile of dirt from one of the construction sites the company was digging back in the early 1900s.

[@1968IH]

I swear you can read minds Jeff! I was wondering a few days ago about the little D4 Matt was working on and I just got my update! Good luck with the offer on the D9H! Hope to see my name on the white board someday, thanks for the great videos. Will Frels from Iowa

[@scottsmith7858]

I believe Titan is pretty much a Goodyear Tire. They do a lot of tractor tires that Goodyear use to do.

[@swampratt36]

Get a junk microwave magnet and wrap it with blue towel ,wipe off shavings and discard towel ;-)

[@jameslea338]

not even 10.000 jeff. this Whole has been rode hard and put up wet.

[@jimmy_digz1319]

Saturday for me = catch up on paydirtarosa 👌👌

[@blacksmoke5009]

That ole D 9 looks like she been run hard n put away wet ! Great video thanks for sharing 👍

[@rogermarshall8991]

The reason starters fail like that. The nose cone bushing fails and the shaft goes crazy in the oversize hole then it breaks the nose off of itself...... The first sign of trouble (inspection) will prevent total Destruction like that. Just a FYI .....

[@Jpaydirt]

It wasn't spinning it over like it used to, so my bad I should have taken it off, you are correct about fixing before a failure

[@ssnydertrucking1121]

The ole 9 just needs some mouth to mouth and some CPR to have a good runner again. The H series was nicer to run with the pilot controls for the blade makes for a shorter day.

[@MrBiggerandy]

I cant stop thinkin bout that toolbox....

[@thewoodhauler9932]

Hi mr jpaydirt just regarding how I could send a picture of the truck I drive for a “showcase” Love your videos man!!!

[@Jpaydirt]

[e-mail]

[@billmiller789]

I got excited when you showed the redone D4 Cat. I have the older version of it but unfortunately because of it's condition and my condition it will become lawn art

[@TheBestPuppa]

Those boxes are sweet!! I love the graphics.. they come loaded with tools..? I know Snapon used to make all CAT branded hand tools.. still the case?

[@Jpaydirt]

I don't know the answer to that, I think tampon makes them now☻

[@billyadams8906]

Just started watching you videos and have subscribed . I'm 13 from New Zealand and I love trucks and machinery probably because I've been around them for my life my dad is a truck driver and has a beer and watches your videos.

[@Jpaydirt]

Thats great, tell your dad he's awesome! and so are you

[@lesflynn4455]

Young man, you are headed for a life operating heavy machinery. You'll love it.

[@rudolphlouw8609]

Such a cool box and he pulls our a Rayobi drill. Lol.

[@endlessmountainwoodworks4278]

I could get you a blade for that d4, only problem is it is in PA. If you are interested I would donate the blade, you would just have to figure out the shipping.

[@Bushguyrocks]

endlessmountainwoodworks

[@endlessmountainwoodworks4278]

Not sure what you mean, I have an old d4 that I am restoring and a parts machine came with it.

[@Jpaydirt]

I'll tell Matt,

[@MyHMMWVaddiction]

The flag on the back of the toolbox is backwards, Canadians,🤤lol love the toolboxes. Like many others commented, go scrap price. She'd be a nice machine when you're done with her.

[@Jpaydirt]

No it's correct just tilt your head to the right, the flag is just vertical

[@rogermarshall8991]

Jeff, Thought you might check this one out. Look up 1974 D9G BULLDOZER. BY skadill. He does old and abandon logging equipment this D9 looks to have been just rebuilt and the engine went South. Undercarriage looks like new. Enjoy. !!!

[@Bushguyrocks]

Roger Marshall Skadill has a huge amount of videos. Fairly local. He has a good style to his commentary. I enjoy his vids.

[@rogersrabbithole8417]

Random Guy Ya I've watched his videos for a long time. I believe that he"s out of the B.C. Area. A truly unique fellow. Wish Washington state had that kind of history sitting left behind in the woods !!!!! He must have a good connection with someone or many people to be able to find all that equipment left behind....

[@southerndirt9589]

That’s a awesome looking tool box wish I had the time to edit my videos like you do

[@Jpaydirt]

You do, just don't sleep☻

[@dozer130]

What's scrap bringing per pound

[@swn02]

cheers Jeff, hey those 610 kws only came out last year and they look good

[@Jpaydirt]

Which one is the 610

[@swn02]

its the first one of Haywards the twin steer, the other is just a later version of old kenny

[@jeffmartin6527]

Great video as always what year is your ironhead sporty keep up the good work and stay safe.

[@Jpaydirt]

72 Sportster

[@charleswilson4697]

keep on digging enjoy your memorial day

[@TheWiking94]

awesome video! respect from sweden! keep doing what you are doing!

[@Jpaydirt]

Hey where are you homie, (slang for brother from Sweden)

[@DigsDirtDigsMusic]

Jeff - I'd love to get my name up on the subscriber board. I don't know much about shopping for used D9's but you sure make it sound like that one will be a lot of work. Is it worth it to you to put in all the wrench time to have a good dozer? Why not take the $50k and look for one in better shape? Maybe that vintage is hard to find...? Or do you prefer to know what went into the repairs? -Sean

[@Jpaydirt]

I print out the comments after a week and if you tell me where you are from and your name your golden,

[@DigsDirtDigsMusic]

My name is Sean iiams, from Post Falls, ID.

[@normannichols780]

Good video 2nd time watching to bad you can't give it two thumbs up.

[@davidhardin7835]

Go with I Michelin or Goodyear radial tire

[@Jpaydirt]

Goodyear = Titan?

[@davidhardin7835]

Jpaydirt goodtear

[@The_blindpizzaguy1300]

I don’t think I would give that dozer the time of day. Because of the massive amount of work it’s going to require to do a certified rebuild on it. I also have a toolebox it’s very similar to that That has both the US and metric sockets.

[@The_blindpizzaguy1300]

It’s by Erwin! The only downside is that it doesn’t have the extra large 9/16 socket

[@hawkie333]

Cool boxes, but not distributed in the US from what I can tell.

[@GMCShazamataz]

New to the channel. Love the CATs, those tool chests look amazing. Great to see manufacturing is still thriving in the USA. Our gov. would rather see imports than manufactured here. Keep up the good stuff.

[@Jpaydirt]

Not DJ Trump

[@joedoakes8307]

So , show us those new tires on date blade !

[@shovelguggelheim8454]

Offer them $15,000 for the dozer and tell them they don't have to pay you all at once :)

[@davidhardin7835]

I wouldn't go no more than 15

[@roberthaddox9760]

I would give 10k to 12k it needs a lot of work

[@curtismoore6387]

Was there a volcano there once along time ago?

[@clydeacor1911]

several. he's only about 60 miles away from Craters of the moon National monument and only about 100 miles away from Yellowstone National Park.

[@kenuber4766]

Nice Knuckle Head in the back ground