Do you think aerogel is going to make an impact on cooling systems? And would you want to retrofit your AC with one of these cooling panels? Click here bit.ly/3UE9Ojv to improve your sleep fitness with Eight Sleep and get $200 off the Pod or $150 off the Pod Cover using my code MATT. If you liked this video, check out How Can A Wind Turbine Be Motionless? kzbin.info/www/bejne/hZy1ool4pbRleLM
@grumpyhermit8657 Жыл бұрын
yanchal stored ice. it doesnt make it. the ice is transported from places where it drops below freezing at night
@l0I0I0I0 Жыл бұрын
I've been following SHIELD and it is the way to go.
@albertkustra Жыл бұрын
I would love to see if they could try to find a way to grow these similar to mycelium blocks
@zodsinclair8500 Жыл бұрын
Hope its not too extremely flammable, like the the exterior reliefs of the formerly inhabited Grendfell Tower that burned down. Other than that it sounds very friendly to the environment.
@thesilentone4024 Жыл бұрын
Can you talk about china's new red hydrogen brake through? Also thoughts on cities using thirsty cement to reduce flooding.
@Nighthawkinlight Жыл бұрын
9°C reduction in direct sunlight is impressive, but I think not impressive enough compared to other radiative coatings that require less effort to produce. Hard to imagine aerogel will ever be inexpensive in large continuous sheets. Other radiative coatings benefit from a plastic film over top of them, which insulates via air gap and also allows for easy cleaning and cheap replacement of the sky exposed surface. I didn't hear mention of a replaceable film over top of this coating and how that effects performance. I'll have to read the paper. Edit: Apparently I was not paying attention to the video and totally missed the point. I didn't notice they're achieving their low temps by combining radiative cooling with evaporative cooling. That's less impressive and more finicky. Having a water permeable surface facing the sky is just asking for dust contamination to ruin reflectivity, and you need deionized water or you'll get mineral buildup. It takes energy to distill that water which is a continuous carbon emission required for operation. Good on them for experimenting but I have little hope in this.
@Br0ken_Rob0ts Жыл бұрын
What if it was used to add shade to the house by like a weird exoskeleton
@justinw1765 Жыл бұрын
Agree on all points. I did like the transparent aerogel in windows somewhat. But vacuum insulation is even more efficient than aerogel and doesn't require extra, super specialized materials. It does require some definite engineering and correct material use, but is significantly cheaper than making transparent aerogel.
@Mr2Reviews Жыл бұрын
I agree with all points as well but one thing I think Matt failed to recognize is the potential to produce these materials in high volumes in space via Starship delivered space factories. There's certainly good use cases for a super lightweight insulation material especially for future space, moon, and mars infrastructure.
@Patrik6920 Жыл бұрын
@@justinw1765 or why not just use tripple layer gass filled one...no need to hassle with vacume windows ...can be made considerbly lighter...
@Patrik6920 Жыл бұрын
@@Mr2Reviews idd...ur probably right those materials would be cheaper produce and easier on the moon or in space...just one small problem we need to send material and equippment up...and defy earhs gravity isent exactly cheap... using rockets its a cost of around atleast 20 000 USD to send 1kg of material on a standard Atlas V rocket... ..not exacly cost effective nor enviromental friendly, and not to mention the use of energy and material to produced to make the none reusable part of the rocket would outweght the saving by faar...
@imetr8r Жыл бұрын
I built a passive solar cooling system for my shop (which is a steel construction). The system is very simple. I placed a second steel "fly" roof above the original roof which acts like an awning, shading the whole building and carrying away excess heat. It makes a huge difference to my cooling costs out here in the Nevada desert. If more buildings were built like this I believe it would make a significant difference to energy usage.
@MrArjanOskam Жыл бұрын
I also believe that having lots of black asphalt roads and black flat roofs, traps and collects heat, increasing the temperature. Adding more greens like trees and such in cities and villages could reduce this effect. It's basically the same principle as you are using, instead using greens. Like adding green rooftops with bushes and plants can decrease heat passing through by a lot, while also adding more greenery for both bees, birds, wildlife and improving air quality when done in larger scale. Little bit like the Babylon gardens. Correct me if all I am saying is BS, I am no expert. But it would look awesome none the less. Cities covered in green plants and flowers. Just like how they're now cooling rivers and streams in Ireland and Schotland by planting trees arround the water.
@Bareego Жыл бұрын
If this "fly" roof is then slanted to cut down the sunlight in the hot months but lets the sunlight through in winter you can also allow sun heating when you want it. If you pick the right angle you could then slap solar panels on there with high efficiency.
@donbraga4863 Жыл бұрын
@@MrArjanOskam greens need water, which in nevada is a bit of a shortage I believe, at least for this type of usage.
@MrArjanOskam Жыл бұрын
@@donbraga4863 I did mean more normal cities and Villages where there is water. I can imagine that there are cities located in dessert like environments that it's pretty much impossible.
@grizzlygrizzle Жыл бұрын
I would guess that there's some serious convective ventilation going on between those roofs. And if any of the roofing surfaces, inside or out, are relatively shiny, there's a radiant barrier at work, too. (Radiant barriers need an air space of about 3/4" minimum to function well, something ignored when foil faced insulation is installed with wallboard right on top of it.) --Forty years ago, (almost to the day) I built a somewhat experimental addition for a friend that had a vented roof with a cavity underneath, bounded by foil below. -- It was a cathedral ceiling with 2x8 rafters, with a poly vapor barrier on the underside, with foil faced fiberglass insulation, installed with the foil up, and the flanges stapled to the top edges of the rafters. Then the foil was perforated with a lot of short knife cuts (so not to act as a vapor barrier). Furring strips were installed on the top edges of the rafters, running eave-to-peak, and the plywood sheathing installed on top of that (with longer nails, to get through the furring into the rafters). The asphalt roof shingles were installed with 1-1/4" roofing nails, so that they would protrude through the back of the sheathing about 3/4", to just "kiss" the top face of the foil, in order to help maintain the 3/4" continuous vent cavity, because the insulation had a slight tendency to puff up. With vented soffits and ridge, the end product had continuous, 3/4x14-1/2" vent cavities running up the roof, surrounded by foil on the bottom, furring on the sides, and sheathing on the top. -- The foil provided a radiant barrier to heat gain/loss, and combined with the convective ventilation, the whole thing worked better than I had hoped. The place was noticeably cooler in the summer, and warmer in the winter. -- The biggest downside was installing the sheathing and the insulation at the same time, unrolling multiple rolls of insulation, stapling it four feet up, then wedging the rest of the roll between the rafters so it wouldn't roll away, and then installing a row of plywood. Wash, rinse, repeat. Some juggling was required.
@GustavoMsTrashCan Жыл бұрын
As much as this sounds very promising, "Accessibility is everything" -- it won't become "the next norm" if nobody can buy it.
@grimaffiliations3671 Жыл бұрын
that's kinda what he said
@myRefuge3710 Жыл бұрын
Its for the rich
@FerociousPancake888 Жыл бұрын
But if you’re NileRed you can make aerogel 😉
@michaelcannon1168 Жыл бұрын
Maybe one day we’ll discover a cheaper material with similar properties. The tech is still pretty cool
@Quickened1 Жыл бұрын
Everything produced is always expensive when it's first introduced, after a few years, the price comes down, and everybody owns it....
@JoshPLewis Жыл бұрын
I painted my roof with very white thermal reflective paint. You have to wear dark sunglasses it is so bright. My loft office went from too hot, even with the air conditioner on full blast to not having to use an air conditioner at all. Roofs should be the purest white they can possibly be.
@Lokielan Жыл бұрын
This can blind aircraft pilots if every house and buildings have it.
@zacharysherry2910 Жыл бұрын
As an electrician that works on roofs consistently I can attest to the fact that I've temporarily gone fairly blind looking at the white TPO material (that thin white rubbery stuff) that covers commercial roofs like apartment buildings. Learned my lesson.
@shawncrocker7037 Жыл бұрын
@@Lokielanthen we need to get aircraft pilots better sun glasses! Overcoming air craft pilot visibility can't be the stopping point for people avoiding their buildings from absorbing radiated heat from the sun!
@concert_rat1004 Жыл бұрын
Seems like the reflective coating would make the place colder than normal in the winter.
@luckuijken5451 Жыл бұрын
@@concert_rat1004 yes, but less than you would think. Due to the sun being at a lower angle in winter, the fraction of solar rays hitting the roof is less than in the summer, and more solar rays hit the side of a building. This can be used to optimize solar heating in winters by placing many windows on the south side of the building, and letting the sun shine inside the house. In the summer, most of the solar rays will be reflected away and the building is kept cool, even with the windows.
@hughmanatee7433 Жыл бұрын
Everyone with a basement can significantly cool their house using the geothermal quality of the cool earth. All you have to do is keep the widows and/or bulkhead to your basement open. Open a path for the air in your basement to come up (the cellar door). Keep the windows in the house closed and shades drawn in the day time and place a fan in one window blowing out in each room you wish to cool. Old school geothermal. In houses with forced hot air, if the furnace is in the basement, you can turn the blower on with no heat and bring up the cooler air that way.
@slydog81 Жыл бұрын
This makes very little difference, practically speaking.
@walter6574 Жыл бұрын
What happens when the basement gets to the ambiant outside temperature? How does the cooler air drom the basement get to the levels above the basement? Why not just turn the fan on in the furnace and keep all windos closed so that out side warm air does not come into th house?
@hughmanatee7433 Жыл бұрын
@@walter6574 The temperature of the earth four feet below the surface is constant, about 50 degrees.
@hughmanatee7433 Жыл бұрын
Warm air in the home needs to be evacuated so the cool air can rise under the pressure made by the fans. Remember that cool air sinks. In order to get it upstairs it must be pumped up and that the volume of the air in a house is constant so you must get rid of the hot air in order for the cool air to rise. It is the same concept as the cupola,hot air rise out and the cooler air rises up to refill the air volume of the house.
@walter6574 Жыл бұрын
@@hughmanatee7433 how does the warm air upstairs get evacualted when the downstairs windows are open?
@kittimcconnell2633 Жыл бұрын
White roofing for any building within 40 degrees latitude helps a lot too. We're in Tennessee USA and I got a white roof on my old house - energy bill DROPPED. Got married and moved to his house, we painted that metal roof very light gray. Again, energy bill dropped and we're much more comfortable.
@leifhietala8074 Жыл бұрын
I especially like the glazing concept, as the current gold standard relies on filling the space between glazing with argon. Eventually those seals fail and the windows no longer perform at their original level; aerogels will stay where they are. The window might even be a bit stronger depending on how the glazing and aerogel are married to each other. If they are bonded with transparent adhesive, you could reasonably expect the entire window thickness to behave as a single, thick piece which would be more rigid and possibly more resistant to sound transmission.
@jac540 Жыл бұрын
I'm a bit hesitant though about the translucent properties of aerogel. It might be great at the moment, but I wouldn't consider windows filled with aerogel or another solid material before I know for sure the aerogel will stay translucent for at least a decade under the influence of heat, cold and sunlight.
@tevawiese6248 Жыл бұрын
Aerogels are usually pretty brittle and not very strong, so I wouldn't rely on it for making the glass stronger, and it's probably not soft enough to act as much of a sound absorber compared to an air gap, but I do like the idea of having an insulating layer that is more efficient than argon and actually stays where you put it.
@ashleymartens4153 Жыл бұрын
I would be very interested in retrofit glazing to improve window performance.
@blg53 Жыл бұрын
Except a thicker material is not necessarily stronger than a thinner one, especially if it is subjected to thermal expansion/contraction. For instance, if you make windows from thick glass that glass has to be borosilicate one (eg Pyrex) or it will crack under temperature changes. So it is either unreliable or VERY expensive.
@djamilawilschke7259 Жыл бұрын
retrofitting the glass has limited effects with the type of windows used all over the US, if you look at european windows from germany or Switzerland, which are the benchmark in the industry for insulation, you’ll see that it’s the double to triple layers of glass + the frames insulated with silicon not allowing for any airflow. the sliding window style does not allow for such airtight insulation
@13minutestomidnight Жыл бұрын
It's always awesome when two different University groups create two highly-similar products independently and then get basically the same results. They've ended up supporting each other's technology and scientific findings, which will hopefully attract investors. If we can even use this type of technology to support AC, it would be incredible - same with radiative cooling, but this is more effective and can be applied outside optimum locations. On a side topic, the passive cooling architecture built by ancient people carry advantages we can use in our buildings now. In fact, the same is true with incredible engineering masters of water management, like the Roman and Islamic empires. We're so used to resorting to shortcuts, electricity and easy-to-use materials (like plastic) that we forget you can do a lot of the same things without them (or at least adapt ancient methods to reduce unsustainable impact). I mean, some things are clearly just human laziness, despite easy alternatives existing - like using plastic bags.
@jimsackmanbusinesscoaching1344 Жыл бұрын
3 Questions: 1 - Has there been any work on what happens to solids dissolved in the water after evaporation? Will the panels be cleaned or will you need distilled water or will the panels be replaced? 2 - Has there been any work on the cost of the water that is required from both a price and energy standpoint? 3 - Is freezing the water in panels a problem?
@jhoughjr1 Жыл бұрын
3 would have to be a problem. Ice can expand steel when freezing, aerogel would have no chance.
@yatesmachine1234 Жыл бұрын
1 and 2 are very good questions. In the desert southwest, evaporative coolers (aka swamp coolers) have issues when sourced with water containing mineral deposits. If the water source for this device requires "pure" water, then significant filtration costs need to be factored in.
@rawwrrob9395 Жыл бұрын
@@yatesmachine1234 My state in the SW US has extremely hard water. I remember needing to regularly knock calcium stalactites off spigots throughout the year at my old house. Swamp cooler substrate would clog with minerals and dust within months and needed constant replacement. Our pool would need to be regularly drained every 6 months or so because the minerals would concentrate so much in the water that they'd start to precipitate out of solution and clog our filters. Even after getting a whole-house water softener system, we still had issues.
@alexanderlau770 Жыл бұрын
I actually think, that reducing the pH-value of the water would have a significant positive effect if crystallisation is a problem. Of course, distilled, pure water would be the best solution to increase the lifetime of such systems but it's very costly. Having a reduced pH-value by adding some weak acids (acetic acid etc.) would e.g. dissolve crystallized calcium and like that, the aerogel-structure would be cleaned, regularly. The only additional point that has to be considered is to find a point at which the aerogel structure itself is not damaged. If that's not the case, just clean it. However, I think that the setup has to be put horizontal anyway. Since the water is in the lower part, the aerogel structure shouldn't be damaged at all if dissolved salts are getting crystallized. I would adjust the design so that the part with the water container acts like a drawer. Like that, just pure evaporated water gets in contact with the aerogel.
@alexanderlau770 Жыл бұрын
To point 3: I actually don't think, that "normal" freezing water should be a problem. If you would use a drawer-like system, water and aerogel would be separated, anyway. Shock-freezing might cause issues if gaseous water resublimates within the aerogel structure. If the freezing process is slow (transition from gaseous to liquid first), the water should condensate into the liquid state and goes into the first container.
@AussieAnnihilation Жыл бұрын
Ac units don't release hydroflurocarbons. That was said as if it's a natural by-product of normal operation. They only release refrigerant when something is broken on it. Hence why in most countries, you need to have a license to install and work on them. Also. Most new air conditioners don't use hydroflurocarbons, refrigerant technology is always changing, and in australia, they don't even sell domestic air conditioners with this type of refrigerant anymore. Refrigerants are an amazing technology that triples the output of any power put into the system compared to non refrigerant based heating and cooling systems. Like oil radiators, and definitely better than burning wood indoors in poorer countries that massively impacts people's health and the environment.
@extraincomesuz Жыл бұрын
Yes I live in Malaysia. Our home is passively cooled by a bamboo grove and wind over the river (plus ceiling fans). Aerogel panels would make our bedroom cooler at night. I wonder if the heat drawn off the top of the panel could be captured to heat water for a warm bath.🤔
@gl15col Жыл бұрын
This is the kind of thing they need to consider along with it's other uses. The more things one material can do, the less materials will be required to build a home, also a big win.
@Quickened1 Жыл бұрын
It's already very easy to heat water with the sun. You just need a black hose coiled in a progressive loop, situated within a black box under maximum sunlight...
@richardtheweaver4891 Жыл бұрын
Nothing in the system gets above room temperature, so no heat can be extracted. The system is a combination of an evaporative cooler (like your skin when you sweat) and a radiative heat exchanger that ‘links’ the unit to outer space. And just like it is impossible to heat water above body temperature with your sweat, this system is limited to room temperature and below. Unless it runs out of water, I suppose. 😊
@edthoreum7625 Жыл бұрын
In my town when it gets too hot people visit swimming pool,beach, or congregate in the library this saves $ for all,,,
@peteranon8455 Жыл бұрын
@@Quickened1 If you have the startup cost, vacuum sealed copper tubes will heat the water to near boiling. Naturally, the setup that harnesses the sunlight will block out the sunlight from anything behind it, so they do have some secondary cooling properties.
@tya044 ай бұрын
Matt, awnings are very deserving of a video. It's not as sexy as solar cells and aerogels, but Technology Connections drives a strong argument that awnings on all windows would save SOOO much energy in Summer.
@datucis8701 Жыл бұрын
In the US at least HFCs are not allowed within air-conditioners anymore. We use 401a currently and are moving further away as well. 401a is an HCFC. R22 is the HFC we used to use and it's not even allowed to been outlawed since 2020 and was being phased put before that. In 2019 the only way to get it was taking it out of old units or the remains of what people had on hand at the time.
@wildcaveman5310 Жыл бұрын
I think you mean R22 is a HCFC. CFC (such as r12) was banned in 1994. HCFC was what recently got axed due to the chlorine (the first C in that) whereas HFC doesn’t have chlorine and is still ok. R410a has been the predominant replacement HFC. But it is also on the phase out chopping block starting in 2025 because it technically has been producing more green house gasses than r22 (good job epa dunces). You have the right idea though.
@m.e.3455 ай бұрын
Thanks Matt.. I have been wondering about aerogels for a while now.. this answered a lot of my questions.
@UndecidedMF5 ай бұрын
Glad you liked the video! And thanks for the support.
@haroldwestrich3312 Жыл бұрын
very interesting info. I have 19 yrs experience and training in HVAC and in my experience "Chillers" combined with "Economizers" are the greatest efficiency gains EVER ! ! would love to hear a comparison. I have only seen modern Water Chillers on commercial buildings but Back in the 50s and 60s there were Water Chillers on many homes in northern California. CONCEPT: the condenser coils are not cooled by ambient air - they are cooled by circulating water that drops through an "Evaporator" this allows the condenser to be cooled to far lower temps than air cooled condensers. ECONOMIZERS are simply "Outside air exchangers" which use the cooler outside air at night to be used instead of trying to cool down the warmer inside air - again; almost exclusively used by large commercial buildings. Would love to talk to someone about designing smaller units for individual homes because it is extremely efficient in comparison to "Mass Produced" "Planned Obsolescence" Units that are Ubiquitous today.
@prakadox Жыл бұрын
For the life of me, I can't understand why people stop using a technology that works. Why did these chillers go out of use? In India, I believe the following were the reasons. Air conditioners were more powerful than chillers/desert coolers and people appreciated the de-humidified air compared to the humidity load that the desert coolers / chillers typically pumped into the house. Was that the reason in Cali as well?
@BlackMamba-lt8oe Жыл бұрын
@@prakadox people in india are smart theydont use coolers that's useless
@christopheraugustine5816 Жыл бұрын
I do not want to go digging through all of the comments to see if someone else has said it, so here we go potentially doubling up on an idea. If the ICER (and similar) designs are using evaporative cooling, and aerogel has pores that are so small, can aerogel also be used for desalination? It occurs to me that if one could use sea water rather than fresh water it would be far more practical in a lot of parts of the world. So if the product could be used to desalinate the evaporating water, and there was a good way of collecting the vapor, this would be incredibly useful. I do not know about the probability of the aerogel simply becoming clogged with salt crystals or any other kind of problem like it, but it is a thought. If the system always has to rely on distilled water to keep it functional I do not think it can be achieved in scale. If we could just make clean reliable water available more cheaply to the world now, that is a huge market. So taking the water we can purify and then sending it back into the atmosphere (where water vapor acts to enhance the greenhouse effect) seems - not better. Cool concept, though. I am certain that it will find an abstracted use in smaller scale for something more critical than basic comfort.
@DavidKutzler Жыл бұрын
I see a potential problem with the hydrogel component. I live in Arizona and use humidifiers during the drier months. Our water supply is very hard. After a few weeks, the evaporative filters are ruined by the accumulation of minerals left behind as the water evaporates. Using a water softener doesn't help, as it just replaces the "hard" minerals with "soft" sodium chloride, which still clogs the filters. I suspect that the hydrogel will suffer the same fate as the water evaporates, leaving the minerals behind. You would be compelled to use distilled or demineralized water.
@ChristopherFranko Жыл бұрын
Dont AC units create water? Couldnt you use the drip from an AC unit to create the water for the aerogel>
@DavidKutzler Жыл бұрын
@@ChristopherFranko Interesting Idea. Strictly speaking, AC Units don't "create" water, but, they do pull water out of the atmosphere by condensing the humidity in the air on the coils. The average relative humidity (RH) for Arizona is 38.5%. For comparison the average RH for Colorado is 54.1% and for Connecticut is 69.2%. The Arizona RH of 38.5% is for the whole state, which includes mountainous regions, like Flagstaff, but most of the population lives in Phoenix and Tucson, which are in the Sonoran desert. I'm not sure how well this would work here in Tucson.
@nateamus3920 Жыл бұрын
At 1:30 you seemed to frame refrigerants, which operate within a closed, sealed system, as being something passively put out into the environment. You said this while displaying a screenful of radiator fans which do nothing more than circulate the outside air through the coils to exchange the heat from the refrigerant. HFC's are incredibly harmful but they aren't being belched out into the atmosphere as you seem to suggest. I suspect you know this and were just trying to set up stakes for your video. Just a gentle reminder that framing is as important as context.
@brent04 ай бұрын
@@nateamus3920 exactly that’s what I thought. They almost never escape. I have a mobile airco from when I was a kid that still works perfectly without ever needing to be refilled with coolants.
@basspig Жыл бұрын
Passive cooling as its limitations and it may work fine in a dry climate. But when you're dealing with 90% or more humidity levels you need Refrigeration to take the humidity out of the air.
@jensholm5759 Жыл бұрын
Thts right and why I only use air to air heating for the 3 big rooms. I has 3 steps. Warmong/cooling - replacing old air to new and make the humidity to a good one. Before that we insolated the old house as well as we could. So You have to do, what makes sense. No mushrooms behind the sofas.
@capcloud652 Жыл бұрын
I have been a HVACR mechanic for 32 years .CFC were phased out and HCFC are almost completely phased out from the CAA .HFC are starting to be phased out due to GWP and HFO ‘s are the new thing they have no ozone depletion and 1 GWP potential .This will be the second time I have been through the phasing out of refrigerants .There will be Chaos for years with multiple “drop in replacements” and competing types that over lap cause a myriad of issues and headaches from contractors not labeling the type in put in a unit to technical issues like zoetropes separating in the case of small leaks changing the dynamics of a system to the oil types changing from mineral to Alkybenzene to Poe which is really hydroscopic and if the oil swaps were not done right and the BRIC number was too high causing damage to systems . Until the industry settles in some key ones .Last time we went from cfc r12 to 134a ,r502 to r404a , r22( HCFC) to 410a and r11 to r123 with about 2 dozen others types being in play for a time as well . We were just getting settled in and now the HFO swap so I welcome something to change the game entirely .
@steveschritz1823 Жыл бұрын
I’ve been doing the fan-in-the-window trick since I was a kid. If it gets cooler at night you put a fan in a window strategically placed to circulate air from the outside through the whole house. This cools down, not just the air, but everything in the house.
@steveschritz1823 Жыл бұрын
If you really want to get fancy you get a fan with a thermostat.
@UndecidedMF Жыл бұрын
That's a great solution for getting the house to the outdoor temps/humidity levels, but you'll need additional solutions to get below that.
@justingriffin2546 Жыл бұрын
@@UndecidedMF Regarding unconventional cooling, I'm doing a house currently, 24v dc chestfreezer- 2/3 full of ice with copper pipe coiled thru the ice, circulating pump slowly circulates antifreeze thru it up to a small truck radiator above it. Above the radiator is ducting with 12v fans sucking the air to the rooms-All DC with 60 panels on the roof...(a condensation tray under it... oh and fish fingers etc in containers on top of the ice.... I'm not applying for a patent....Love ur channel btw...
@wolfbrave4866 Жыл бұрын
Over here we start putting plants to shade the Air-conditioning unit on the roof as the unit is heat by the sun it will run harder and use more electricity. Olden days people in warmer climate deliberately make the roof drain rain water slowly, when the sun is up it helps to prevent the house from heating up fast.
@marjohnsmusings3222 Жыл бұрын
Matt, When I lived in the high desert in San Bernardino CA, we used 'swamp coolers,' as normal AC froze over in far less than our 120 degree July weather. They were plumbed to receive slow drip or fine spray hydration, only while running, as water was scarce. Air blown through wet straw mat evaporative coolers did provide heat relief of up to 40 degrees F. but 85 is still hot. They helped me with bleeding, dry sinuses too, via airborne moisture but they had a serious health problem with black mold formation. Replacing infected, expensive mats proved insufficient, because once mold got into duct work, the entire system stubbornly stayed contaminated. Could an aerosolized foamed glass work as the white evaporative layer? It would be potentially flushable with fungicides or to rid it of dust or allergens like pollen. Glass is a bio-inert sol. Borosilicate glass has high heat resistance. Perhaps microtubials for moisture transfer? We used wax sprues, which melt away in the kiln, while making bronze castings. Corrugated glass could be stacked cross grain and layered like safety glass with a porous plastic middle layer. We might be able to recycle glass and plastic as raw materials too. We used polarized plastic film on sun facing windows. It helped, but being grey and restricting light entry, the film turned the rooms dark. The clear aerogel sounds like an improvement. $$$? In the UAE, many kids get lung disease from silica particulates. Air filtration matters. Stagnant air is a misery, especially if it is humid with poor air quality. 'It's not the heat; it's the humidity.' is not just a cliché. One rainy South Jersey summer with no air movement will convince you. Matt, Stay Hopeful. You are such a blessed relief from politics, I can't even tell you.
@justingriffin2546 Жыл бұрын
nice story. you probable already know that white vinegar kills mold amazingly, especially the pure stuff....i had similar problems in the tropics-endless rain....
@markme4 Жыл бұрын
Why was your AC freezing up? I would never hook up an evaporative cooler to a ducting system
@mr.monitor. Жыл бұрын
@Mark Me ya it really shouldn't freeze up regardless of outdoor temperature if it's charged correctly and has a clean filter. I think you would use the swamp cooler separate from the ducted system.
@justingriffin2546 Жыл бұрын
@@mr.monitor. That's correct the freezer is just has copper pipes to cool the fluid in the copper pipes...even moisture in the room air condensates into a drip tray. Its 2 systems -not a swamp cooler. Im in the tropics i don't need more humidity....
@geoffreymentink9570 Жыл бұрын
I would be concerned about Legionella. Plus these only work in dry areas, such as Melbourne, Australia, but not Brisbane, Australia.
@paoloviloria1 Жыл бұрын
Prior to the invention of the air conditioner, people who lived in the more tropical/warmer parts of the world designed their dwellings to utilize natural cooling. Design/architecture, engineering, and materials used were studied and factored in relative to the number of people living in the dwelling. The problem with residential and commercial cooling is how densely populated areas are. Even with non electric or mechanical cooling solutions/material, it won’t really help if the architecture was designed to utilize current AC solutions. There are urban areas whose overall design are very good heat traps. But I like the idea of going back to cooling solutions that do not require power, if it will help reshape how cities and residential areas are engineered. It might even lead to a better population distribution instead of having densely concentrated/populated areas.
@danjohnson6800 Жыл бұрын
Regarding use on the side of buildings in climates where freezing happens, this usage is in constructing a cooling device which is tricky as the comments show. Matt did another video on aerogel as an insulator. I too would like to get my hands on a sheet of it, or would like to make it from ingredients! Aerogel insulates about 2.5 x better than fiberglass, so insulating sheets would be useful for insulating walls and ceilings. It is fragile, subject to cracking and breaking. We have a long way to go on using it practically, but the core idea is powerful. Passive cooling design of buildings and homes is also a key. With good design to minimize heat transfer, a lot of cooling can be done by letting out the heat of the day and letting in the cool of the night. I do this in my apartment. We are in a state where the easy single-approach answers have been done. We must accept that our future will use a combination of many technologies. None of the solutions will be simple, but we have computers and small motors to accomplish continuous adaptation, giving simple easy to use final products. America, we have everything we need, even supercomputers in the GPU's in our home gaming machines (great excuse to get one ;-) ) Let's get inventing-it's what we do!
@ccoder4953 Жыл бұрын
The window application is really fascinating. And, if they can get good longevity and low manufacturing costs could be a game changer. Double pane windows are a huge improvement over single pane, but still very much limited by the fact that convection currents between the panes can transfer heat. Being able to lock up air inside an aerogel would be massive for improving efficiency. As an example of just how bad today's windows are, I have very well insulated walls (spray foam and blown in fiberglass). In front of my windows I have dual cellular blackout shades which add something like an R-5 to the windows. Despite the fact that I have modern, double pane, casement, low-e windows, you can feel significant amounts of cold air from around the edges of the shades. And it isn't that the windows are leaking - it's just that the windows are that much colder than the room.
@ronpetersen2317 Жыл бұрын
In my house years ago we had all the houses updated to be more energy efficent ... except for one window in the house. The difference is extremely noticable on a cold day.
@XEyedN00b Жыл бұрын
I put a IR reflective film on outside of windows in my flat, they block about 10% visible light but they helped me cool my home in summer by about 4 degrees Celsius. Passively.
@jensholm5759 Жыл бұрын
I dont know Your country but we can buy those windows as standard. In the winther they keep the temperature inside better as well. And 10% was a learning. Plants in thewindows grow very slow and some has been donated to heaven. So the shoise is to look a´t the bill for varming up and comfort.
@XEyedN00b Жыл бұрын
@@jensholm5759 Yes, we can buy such windows here (Poland) but I wanted a low cost retrofit, rather than having to replace entire panes. I still plan to replace entire windows next year, because they are already old, just needed a quick solution. I don't have plants near windows because I have cats and so the only plants we have are shade-liking plants on high shelves.
@jensholm5759 Жыл бұрын
@@XEyedN00b A quick fis is better then none.I wish You good luck.
@utkarshsrivastav17117 ай бұрын
Aerogel is tough to work with - the material is vacuum sealed, and it has to be installed with attention to not piercing the vacuum (otherwise there is no insulation). That may require getting some pieces of it custom sized - which will cost a fortune. (last I checked, Aerogel was about 30 times the cost per square foot as some other insulation, but I haven’t checked recently). Aerogel is quite thin, which makes it appropriate for odd conditions where you have to keep a very narrow profile and still meet some energy code requirements. Even in very high end residences, where presumably money is not an issue, no one is going to use Aerogel as the primary building insulation. There are simply products that will work well enough for what you need at a much more reasonable cost. In a residence, your structural requirements are going to leave you with a stud cavity that you might as well put something in - and in almost everywhere in the US, you can meet code requirements with a more typical insulation type - either fiberglass, or mineral wool, or polyiso boards. Those will be much easier to work with than Aerogel, cost you considerably less and will still let you do remodeling in the future.
@donaldpyper4627 Жыл бұрын
The addition to double glazing is interesting as that is the sort of high cost and quality application that would make increased performance worthwhile
@johnkelley1426 Жыл бұрын
It's challenging to find commercial suppliers for residential aerogel windows -especially those building "German" or European tilt windows. Thanks again, Matt.
@BlackhawkPilot Жыл бұрын
This seems to great for the windows. There are 97% reflective white coatings (have you not covered this?), exterior insulation, heat & moisture exchangers, and whole house sealing that can all be used in combination for a very energy efficient building. Add solar or wind and net-positive is reasonable to expect. Our building codes have to be updated to make these efficiencies required.
@psesolarscott7 ай бұрын
I am most impressed by using aerogel in the dual pane windows. Seems like the perfect application. Insulation in general, is way underrated, Im a solar guy and tell my customers that want a lower power bill to insulate and call me back. most dont.
@sngopalkrishna8054 Жыл бұрын
In India, earthen pots are used over rooftops during hot summers and the temperature comes down by atleast 7-8 degrees
@Baruch-Hashem Жыл бұрын
CO2 is not pollution, HFCs are. We need to do better insilations and solar to power A/Cs , not live hotter. Not living in hot places can help.
@richardteychenne3950 Жыл бұрын
Love the channel Matt. I would think that a fully clear window is not always necessary. If a translucent aerogel insulated skylight was a simpler solution it could offer many benefits, summer and winter. Adding light where needed without heat gain or loss especially in the commercial marketplace.
@UndecidedMF Жыл бұрын
Thanks, Richard. Good callout on the skylight!
@ridethetalk Жыл бұрын
@@UndecidedMF Not a big fan of skylights - they break the insulation layer and are also an area where leaks can develop. I much prefer a solar skylight where a solar panel on the roof connects to an LED panel inside which gives light in much the same way as a skylight (coming and going with the sun) but which you can energise with mains power at night to provide a constant light after dark. Only a pair of wires from the panel to the LEDs...
@MaximinoReyes Жыл бұрын
@@UndecidedMF What about a callout for a Transparent form of Silica Aerogel to augment the Efficiency of Photovoltaic Panels?
@sjsomething4936 Жыл бұрын
@@ridethetalk but then you don’t get to see the stars at night or awesome lightning during storms 🙂. So far (knock on wood) no problems with mine, I have 2 in my roof since I bought the house (over 22 years ago) and I’ve had the roof replaced 2x. Aerogel would probably be really helpful in reducing the heat buildup in the attic, partly caused by the skylights. I’d definitely consider new ones with aerogel when I replace them, which eventually I’ll have to do as they’re showing their age.
@aquietwhyme Жыл бұрын
@@ridethetalk There is always the fiber optic middle ground solution, though that doesn't provide light at night, obviously, unless combined with LEDs.
@kenbellchambers4577 Жыл бұрын
I have used refrigerators that ran on kerosene for a few years. Then I graduated to propane fridges for another few years. The flame on this type of fridge is only about one quarter of the size of a gas burner on a stove. This small circle of high-grade heat can make ice and keep some of your food frozen, and some just nicely cold. A larger volume of low-grade heat should be able to do the same job. The heat/cold cycle uses heat to pressurize and compress a gas, then to release the higher-pressure gas in order to absorb heat from the inside of the refrigerator. A solar collector for water heating could be used for refrigeration. It would need a larger heat exchanger to compress the gas through absorbing low-grade heat. It could be designed to make-ice-while-the-sun-shines, and this could carry the fridge through some cloudy weather. IE, a hot water powered refrigerator or air conditioner.
@GMod428 Жыл бұрын
Because of this channel, I remove or add something new to my dream home wishlist every week. Can't tell if it's making me more or less undecided
@VirakNgauv Жыл бұрын
Ahaha same! New tech for my extremely passive dream home. 😂
@LostBrit_292 Жыл бұрын
I do the exact same. But now I need to win the lottery to find my dream home. Haha
@UndecidedMF Жыл бұрын
Ha! Sorry about that.
@FreeVegan771 Жыл бұрын
I recently lost weight (all) and started walking, after a year I don't require A/C anymore, (Florida) I know everyone can't do this but the correlation between my health and the planet is real.
@TracyNorrell Жыл бұрын
The new intro is very cool, Matt. Thank you for keeping it short so we could get right to the great info you always give us
@ГеоргиГеоргиев-с3г Жыл бұрын
"Evaporative cooling, perfect for regions with lack of available water, you just have to moisten the hydrogel with the water you don't have, every four days" you should check your definition of great, the wind through roof cooler was better for people cooling, because it actually doesn't consume anything at all, there are building designs that use convection currents for passive cooling, using evaporative methods has its drawbacks(needs water), natural heat flow doesn't, you have heat you get heat flow (hot air goes up) use it to collect the colder air from below, you just need any amount of wind outside even the one generated by the building's heat, it will work as long as there is a colder region anywhere above, space for instance, some black body radiation to use it, the rest of the aerogel sandwich was fine. But some solar panels and some diode coolers could also work to concentrate the heat and send it up (less efficiency (2 energy to 1 heat), 8x more electricity use than standard heat pump (AC ~ 4 heat, 1 energy), no gases released on disposal, no moving parts only aging due to heat up expansion and miss use(over voltage bad for anything) over a normal solid chunk of metal aging)
@misteralias2850 Жыл бұрын
I think it is important to note that replacing localized carbon emissions with broad scale water evaporation would change weather patterns and produce more heating over time. Water vapor is much more effective as a greenhouse gas, so introducing a tremendous amount of water vapor as the solution to cooling to replace carbon dioxide looks to be a cure that is worse than the disease. We don't know what would happen if we just turned cities into vapor production facilities. I can only imagine the repercussions of such an implementation. And a gentleman below made a point about dust and debris sticking to the aerogel. I second this. From an engineering perspective, while the left over particulates would not pass through the aerogel, they would still stick to the gel or the rest of the inside of the cooling unit. He is correct in his assessment that the water would need to be distilled to prevent particulates from clogging the system. A lot of work would have to go into a system like this. It's a fun idea, but seems wasteful and impractical in its current form.
@rtfazeberdee3519 Жыл бұрын
Interesting product. A more detailed follow up on the "aerogel" double pane windows would be useful
@Sharperthanu15 ай бұрын
About your migraine headaches:They may be caused by all high carb food in your diet(including sugar).The best substitute for sugar is Sucralose and the rest of the high carb foods in your diet can be substituted with whole wheat bread or pasta and brown rice for white rice.You may also want to try caffeine substitutes because you may getting caffeine withdrawal headaches in addition to hypoglycemic headaches
@rickloftus9330 Жыл бұрын
I love the stories about using materials science to solve our energy problems. The fewer the moving parts/complexity, the better.
@pwnmeisterage Жыл бұрын
There's always limitations, though. This hydrogel periodically needs to be "watered" to continue operating properly. While it turns out that water tends to be scarce in the hot, dry areas which need cooling most - indeed, water is more expensive to transport than electricity. But it does promise to be an improvement. Another tool, another option, another solution.
@sethjensen2291 Жыл бұрын
Know what's really cool? Choosing a style so cool for a You-Tube channel, you don't have to improve or change anything ever and it somehow remaining the best of it's kind.
@Spark010 Жыл бұрын
Really interesting application for Aerogel. It’s a very fragile material, so I wonder what it’s shelf life would be in the MIT use-case.
@nutzeeer Жыл бұрын
There are also aerogel combined materials like pipe insulation. Less effective but flexible.
@justinw1765 Жыл бұрын
There are various different kind of aerogels. There is a polyimide (what Kapton is made out of, or rather that is a brand name of this material) based aerogel that is quite strong and durable. The old, classic silica based aerogel is quite fragile because it is very brittle.
@johnowens5342 Жыл бұрын
Is aerogel UV stable long term or does it break down?
@Spark010 Жыл бұрын
@@johnowens5342 the gel in this video discolours over time but I’m not sure if that reduces its effectiveness.
@nutzeeer Жыл бұрын
@@johnowens5342 its silica. glass.
@RayMak Жыл бұрын
Can’t wait for this to be mainstream
@DanielBoger Жыл бұрын
This sounds very interesting for things that you would like to passively cool or improving existing air conditioning units. But I don’t see it having value for housing insulation since in the winter you want to keep that heat in. Unless there is some way to stop/reverse the cooling effect, maybe if the hydrogel is dry. On another note have you ever looked into Magnetic refrigeration? I had done a research paper on this in college and wonder if anything had really happened with it.
@markelmer3775 Жыл бұрын
Being part of the current HVAC industry I want to note that air conditioners and refrigeration does not just release HFC refrigerants. In fact it is our goal to never release these refrigerants.
@SnapScienceOfficial Жыл бұрын
Another great video! I would like to know if the water in the hydrogel needs to be simple tap water or if something like distilled water needs to be used to prevent mineral buildup. If it needs to be distilled, how does the energy-producing distilled water compare to the energy used in traditional air conditioning? These are the questions that keep me up at night.
@Rickmakes Жыл бұрын
I was wondering the same thing. Distilling water is very energy intensive.
@Bhartiya969 Жыл бұрын
My Answer is NO.. If I have understood correctly then, this technique reduces inside temperature by (1) reflecting sunlight (2) and holding water (3) allow air to pass through which cools down roof.. 03 stage.. We can find easy, cheap, easy to available, easy to install materials as a alternative..(1) We can cover roof with shades, (2) we can use sponge type material which can hold water and (3) so that air can pass through the sponge to cool down roof. Have you ever seen Indian traditional way to cool down water?
@jopo7996 Жыл бұрын
Hey Matt. Love your channel and research. I'd love to hear your take on Aptera's current situation. You are excellent at gathering, deciphering and presenting information.
@UndecidedMF Жыл бұрын
Thanks for the suggestion. I've actually talked to them a few times ... might put together a future video (TBD).
@apple1231230 Жыл бұрын
I’ve got a pre-order since a year ago and this will be my first new vehicle ever!
@jopo7996 Жыл бұрын
@@apple1231230 That's awesome. Good luck!
@ninehundreddollarluxuryyac5958 Жыл бұрын
In case this hasn't been obvious to the materials scientists involved, you mentioned end-grain wood several times. This material is available in bulk at low cost. We have millenia of accumulated research on gluing, cutting and shaping it. Recently I have seen examples of "transparent wood" where all the living material is bleached out, leaving just the bundle of hollow straws made of cellulose. This is a precise microstructure with ideal properties for the evaporative cooler application. The bundle of straws structure is far superior to an isotropic gel. Different species of trees are known to have unusually coarse grain like southern pine (larger diameter straws) or finer grain like oak (thinner straws but more of them), so you can have a fair degree of control over the capillary properties of the material by choosing an appropriate species of wood to start with.
@ЖивотзаЦялото Жыл бұрын
Hi Matt , thanks for your videos. I have made myself some experiments at home trying to save energy using different materials and techniques and until now I have managed to reduce my energy consumption almost with 50% comparing with the consumption of my neighbors in Amsterdam, Netherlands. So isolating my windows with semitransparent foil I have achieved a saving of almost 40%. Of course there’s more room for improvement but sometimes you can achieve very good results with some simple solutions 😊 which don’t cost a lot of money and new experience materials. Isn’t it?
@lidoz Жыл бұрын
I never had to finish the work but I used what they did prior in middle east. You can have semi porous clay with water under it and this can cause cool from water evaporation. While the clay blocks the sun ray. If there is no sun, wind hitting the wet clay will cause evaporation and reduced heat as well. And this can be mass scaled.
@NLPexperts Жыл бұрын
This is a terribly inefficient and hard way to achieve a humidifier. A mag lev fan blasting a pale of water or using solar to lift water and drip it down a wall will be at least 3x more efficient. Just put loads of pipes opening in your room, air is pulled into pipes is best free advice. Nothing will get you from 40 degrees C (here at midnight in August) to 20 degrees other than huge amounts of energy usage.
@gorgonbert Жыл бұрын
Combining this technology with photovoltaic panels to cool them would be very nice 👌
@GoodEnoughVenson_sigueacristo Жыл бұрын
How do you envision that working? I've thought of circulating underground water behind the panels in order to keep them cool in the summer and snow-free in the winter. For thermally balancing panels, that seems to be a pretty good option to me. Or if cooling was the only concern, ducting could be used to passively pull air from the crawl space and out across the backs of the panels.
@apalladium5k Жыл бұрын
When I tell people about things I learn on your channel they don't believe me. It's good that you cite your sources.
@michaelferrin2688 Жыл бұрын
I think it would be amazing to use to help existing ACs, love how it would be used to be an additive rather than substitution. Also love the idea of the aerogel windows...my windows are garbage. I wonder if any of this could be flipped for environments where we have cold too.
@keith_dixon Жыл бұрын
It wouldn't work because ACs do the same thing but orders of magnitude better. The two technologies are incompatible.
@picobyte Жыл бұрын
The idea is nice, but here in the Netherlands where our 25kW solar array on average only gets ~11% utilisation. That array produces as much as running a 2,75kW generator 24/7/365. In summer those panels produce more power in two hours than my airco uses in a day.
@TheIrafeedie Жыл бұрын
Great video and thanks for all the time you put into your videos. They are always exceptional and professional. I am a retired EE myself. Yes I would be willing to upgrade my A/C and windows but obviously will depend on the cost. Again, thank you.
@jonathanblack141610 ай бұрын
You can put four inch pvc about four feet deep in the ground and have it with a computer fan with a solar panel and battery charging also to store Ebro for the fan to run at night when the sun is down and lit the fan on the outlet side of the pipe to pull the air the out the pipes cooled air. Thought of this many years ago. Run it during the winter to keep the place from freezing temps too for like a summer home when you’re not there in the winter and it keeps the pipes from freezing without electricity.
@TheTechFuturist Жыл бұрын
Wow, what an interesting video! I appreciate the information on alternative cooling methods that don't require electricity. The examples provided were very helpful in understanding the potential applications of these methods in our homes.
@lee8org Жыл бұрын
Living in Australia I assume it is similar in US..people build houses to sell and not to live in so using double glaze or triple glaze is to expensive and cut into profits. In Europe nobody uses single glass windows. It is not only question of thermal insulation, but also sound insulation. We do not need wait for airo-gell to become feasible alternative. It can be done wright now.
@Valixeus7 Жыл бұрын
I would be curious about how well it would be as a thermal barrier for vehicles too. Firewall, exhaust systems, general insulation. I see it being popular in these applications as well.
@marktapey7678 Жыл бұрын
Correction, air conditioning doesn't just release CFC's unless you just cut the refrigerant lines or purposely release the gas which is illeagal to do they do not just pump out CFC's. Other than that the jell hopefully will become a valuable resource if they can produce it cost effectively.
@jensholm5759 Жыл бұрын
Thats right. Only a feww % of that gas is recycled but we are doing a little better yaer for year. Refrigirators and freezers are recycled up to 80%.
@marktapey7678 Жыл бұрын
@@jensholm5759 In the United States it's mandatory for all refrigerant gas in any appliances including a.c. a.c. units to be reclaimed and recycled. No scrap yard or dump will take it unless it's done. If an auto a.c. is changed or serviced it also is required to be reclaimed. So I'd guess that's more than a small %
@jensholm5759 Жыл бұрын
@@marktapey7678 Thats better then hoped for.
@Poorboychickencoop Жыл бұрын
You should do a video for the (us) people on the gulf coast who at only once in my life time reached 8°f and are always feeling triple digits in summer w/ very high humidity. Give us a combo video of a budget and the best build please.
@MasterMayhem78 Жыл бұрын
Ban gasoline, ban gas stoves, buy electric vehicles, use electric stoves, but don’t use any electricity....see where this goes.
@Moe-Moe1218 ай бұрын
Then produce non recycling lithium waste that equal to nuclear waste..
@JustAHumanToo7 ай бұрын
It will goes to stone age orrrrr magic age where all things fuels by mana :p
@Jorora_Dev7 ай бұрын
Actually it’s more like ban cars in general. Swap it for trains, bikes and public transit. Then you can use as much electricity as you want and reduce housing and environmental costs. Cars are just not sustainable in any way. Electric cars are cope and don’t really solve the problem. It would be best to just use trains like other countries and make cities walkable. This would preserve the most amount of electricity and keep things relatively sustainable. More reactors too, that one’s just people overreacting.
@roanusoft367 ай бұрын
Will be back to stone age in no time.
@Dranreb8657 ай бұрын
What will the VVIP's use? Imagine POTUS with 50 secret service with him inside a bus or a train.
@Pepe_69 Жыл бұрын
So do we habe to cover our whole rpof woth icer? You didn't show us the installation process and the full explanation of how it cools the house
@robertweinstein6441 Жыл бұрын
There are those of us who don’t believe the popular narrative of warming. I find the the technology presented intriguing and a true potential benefit to humanity. I don’t like “science” attempting to use their expertise to scare people. I have now spent 2 decades looking at the data and it doesn’t support eh warming narrative. Being good stewards of our resources and improving the well fair of all human beings is a laudable goal and one for which we should always strive. I truly appreciate you bring this new technology to our awareness.
@amac9245 Жыл бұрын
Did they insulate under the concrete pad? I did this in my garage 4 years ago and it has made a huge difference. Unheated and -40C outside and my garage will be between +5C and -5C depending on the length of cold snap and garage door opening frequency.
@M-Cycle6 ай бұрын
One of the reasons of climbing temperatures and climate change is conventional HVAC industry. The next R&D stage of the HVAC climate-friendly transition is a step forward from Low GWP to Zero GWP refrigerant. Water is absolutely zero GWP refrigerant. Dew-point indirect regenerative water evaporative cooling and refrigeration can substitute a traditional AC with drastic reduction - 15X in energy consumption, 20X in carbon emission and 5-7X in capex and opex cost. Lower energy consumption of air cooling - more affordable overheat relief and tackling climate change. 5X greener AC was a dream of The Global Cooling Challenge 5 yrs ago. Now there is a 10X greener (water) evaporative prototype.
@oldionus Жыл бұрын
Bring it on. This is exactly the kind of technological development we need to ensure a sustainable civilization's emerging in the 21st century.
@Draxis32 Жыл бұрын
It basically works as your skin. Which is impermeable at the first layer but is filled with micro ducts that allow water to evaporate on it's surface. It won't work in humid or swing temperature environments as said. And it will consume loads of water in dry hot climates, where it's suppose to be ore efficient.
@crankfwd8209 Жыл бұрын
I would like your opinions on this idea I have for an underground electricity generating system. There is a reservoir of ferrofluid at the top of the system, from which a tube goes downwards about 500metres where it drives a turbine. The ferrofluid then collects in a bottom reservoir. I then have thousands of tubes (straws), immersed in the ferrofluid, that go upwards for about 34feet where they curve back downwards for a couple of inches. Underneath the downward curved end of every tube, is a magnet, which pulls the ferrofluid onto itself forming a nice prickly blob. The magnet can only hold so much ferrofluid, and the excess will fall into yet another reservoir just beneath the magnet. This reservoir has thousands of tubes leading up to thousands of magnets, filling yet another reservoir about thirty feet above. I repeat this process until I fill a reservoir that is above the original reservoir, which it feeds. Obviously the tubes and reservoirs would have to be pre-filled before the system would start working and it would be a nightmare to build, but is it possible? How high can a magnet pull ferrofluid? I've heard that neodymium magnets can last 700 years, so have I just invented a clean energy source?
@balokurd17 Жыл бұрын
AC's are Heat pumps, I almost never use my minisplit to produce cold and it heats my home 95 percent of the time. When it's very cold, I use my petrol heater because the outside calories are more difficult to grab for my minisplit. YES even if it's freezing, there's still calories outisde !
@AliMahdavi Жыл бұрын
The problem with double/triple glazing windows is mostly radiation, not thermal conductivity. Currently, there are glazings that reflect IR and help retain the radiation inside, even adding a curtain helps a lot.
@veramae4098 Жыл бұрын
I put a ceiling fan in the ceiling, 2nd story of my house. I've used lots of window fans in past with little relief, but this monster does the trick. Blows hot air into attic (which has several exits) and that creates a pull to bring cool air into the house.. I use it during summer, mostly at night, leave windows open farthest from the fan. Close the windows in morning. I'm down to using AC for about 2 weeks each Michigan summer and I could probably stop that too. MUCH cheaper than ACing whole house!
@thomasmann3560 Жыл бұрын
You guys have to remember. HFC's are not being vented to the atmosphere. They only make the system run. The only way they get into the atmosphere is if there's a large system leak which is rare.
@HuntBobo Жыл бұрын
The efficacy is inversely related to the humidity, from the swamp. It’s amazing how much you can lower your AC bill with thick insulated concrete walls. The thermal density equalizes inside temperature over time. Keeping the cool of the night the the day and warmth of the day through the night, like a cave.
@tomc.4860 Жыл бұрын
I live in Florida and I have been looking for options to air conditioning for years. Many of the options used by our ancestors are not allowed to be built into our homes today. I did add solar powered air conditioning to my workshop so I have 74 degree temperature which is totally solar powered. The initial cost is mostly in the battery. If battery technology gets better and cheaper then this is a much better option. I am hoping to either replace or supplement my central air conditioning with small multiple AC units powered by solar.
@theavalanche23658 ай бұрын
Can you make a video on plasmonic paints ??? Or if you already have then plz share the link...
@williamhansen8699 Жыл бұрын
Thanks!
@UndecidedMF Жыл бұрын
Thanks again for the support.
@dazmavlad Жыл бұрын
The evaporative cooling is the most efficient in areas with dry air… that is, the areas where access to water is already limited. How much water would be required to cool a multi-story apartment building or a family house in Arizona? And how well will evaporative cooling work in Florida?
@murderdoggg Жыл бұрын
I'm from the South, and I never heard of sleeping porches. Seems resonable as long as you have good screens against mosquitos though.
@QuesoCookies10 ай бұрын
I'm most excited about the cellulose gels. If both the method and material is cheap and scalable, it seems to obviously be the most promising candidate for the mass production necessary for aerogels to get broad adoption in the short term. The fact that they're nearly as capable insulators as much more prohibitively difficult to produce aerogels with no good scaling solutions in sight is icing on the cake, and the fact they're the most sustainable and environmentally friendly is a big ol' cherry on top. Why are we not funding this?
@jammer6524 Жыл бұрын
I'm lucky enough to live where the air has low humidity. We use a swamp cooler to cool our home. The swamp cooler could run all day for about the same cost as running an AC unit for an hour. Bonus my skin and the house plants love the swamp coolers added humidity .
@guloguloguy Жыл бұрын
WOW!!!! THANK YOU, FOR REVEALING ALL OF THIS AMAZING TECHNOLOGY!!!
@Zurenza Жыл бұрын
I think there are a few issues. Namely, evaporative Cooling is extremely useful, in places where it's dry like Pheonix, West Texas and California. But, in places on the East Coast, East Texas and the Southern US. It's actually incredibly Humid. Air can only hold a certain amount of Moisture and so the efficiency of having Water Vapor carry out the heat decreases dramatically when it's humid. And in these places in particular, there's an average Humidity of 80% or higher, yet the temperature frequently sits in the Hundreds or more especially in the south, this means Evaporative cooling is extremely ineffective there. Air Conditioner's were originally built to remove humidity from Factories, it just turns out they make things cooler as well as a result. Radiative Cooling has a lot of potential though in general, if houses were built to be far more resistant to Heat to begin with and had "Radiator's" in the form of metal barrier's between themselves and the sun, that would dramatically decrease the need for any sort of AC until the temperature's get unbearable.
@wildcaveman5310 Жыл бұрын
If you live in a hot and humid climate don’t get your hopes up for this to work well. This concept on its own will actually increase humidity and make your clothes mold and wood floors buckle in your house. But I hope it becomes a viable solution for low humidity environments.
@brianwalsh1844 Жыл бұрын
I listened to a very interesting article about EVs and range - most people never need an EV with a 400-mile range, and if you were to offer a smaller battery, say half the size, then there would be more battery components to go around and with the reduction in weight the range would be greater than 200 miles.
@barracuda861 Жыл бұрын
Doing something to the glass panes is ok. But a lot of windows of earlier houses aren't insulated around the window itself. I helped a guy do blower tests on houses. A lot of air came in around the windows, especially under the window. You could also take his special camera and see the hot and cold areas. So when the window guys came to put my new windows in I looked around and sure enough, mine didn't have insulation. Or it was cellulose and dropped to the floor area instead of on the wall. So I pulled some board off and put some there. Lots warmer now.
@sandravukovic2901 Жыл бұрын
My grandmother's house was isolated with hemp. Very cheap and back then still allowed. Never needed an AC, never worried about fire hazards. But hey, one cannot make money that way...
@michaels5705 Жыл бұрын
Thanks for the video. I appreciate the education you supply. One thing: Light years are a measure of distance not time.
@btf6585 Жыл бұрын
I can only imagine the impact of introducing this across the planet to all buildings. It would have a huge impact. Let's hope the world heads in that direction instead of using air con.
@serkancebeci2200 Жыл бұрын
hi , If I remember correctly, I used to read a famous article about the construction of this item, and the solidification for aerogel works were finished,I don't know if they just do it to applications like materials science. If I had the chance, I would make a vacuum container and try to fuse it with airgel by adding different materials. 06:50 Airgel can be pressed under vacuum with acrylic structure ?
@tygrahof9268 Жыл бұрын
As an electrician I upgrade old homes from 50 to 200 amps and most add a 60 amp air conditioner. Meanwhile the transformer is the same one put on the pole in 1920, NO THOUGHT goes into making the homes more economically or ecologically friendly. It is a HUGE problem, that NO ONE is fixing. This could be a new industry right here!
@nikolaskuklis5925 Жыл бұрын
I wonder if you heard of what some call "sky cooling paint" When i heard aerogel letting infrared through i remembered on similar principle the paint works by "exchanging heat with sky" because it emits radiation wavelength that isn't absorbed by atmosphere (if i remember correctly) The drop below ambient temperature was i think also about 5°C or more It consisted of microspheres (don't remember the original chemical but CaCO3 supposedly does the same) and it was mixed into "paint like" consistency in acrylic with acetone
@drpoundsign Жыл бұрын
a Much More Realistic (and comfortable) "Green" option would be a Ground-Loop (geothermal) heat pump. It's about 55 F year-around ten feet below the surface. They put antifreeze loops down there and pump the antifreeze to the surface. In the SUMMER: They flood the heating coils of the Central HVAC (which is INDOORS, in your basement, away from the elements) and the heat is taken underground. In the WINTER; they flood the cooling coils, (which are at a Very Low temperature, from the refrigerant evaporating) and, similarly, the antifreeze absorbs the cold, and it is taken underground, where the antifreeze temperature equilibrates with the much balmier underground temperature. Such a system is initially more expensive, but about 500% more efficient than gas heating, or a regular (air-source) AC, because you are NOT pumping heat/cold Uphill. The ground loop itself can last for a Century. And, YES, a Solar roof, or wind-turbine, can-where practical-supply the Energy for the system. You could use the surplus to charge an EV. The Only places you could't use a Geothermal Heat Pump are in the Arctic, or at High Elevations, where you are sitting on permafrost. Tall buildings can use a deep vertical (instead of horizontal) loop.
@tomcartwright7134 Жыл бұрын
So if the aero gel has perforations smaller than an air molecule, could it be used for water filtration?