COOLMAN REYNA M-ATX Case FULL IMPRESSION

WHERE TO BUY?
SHOPEE: shopee.ph/Cool...
LAZADA: www.lazada.com...
Specifications and Features.
- Front & Left-Sided Tempered Glass.
- Super Speed USB 3.0 Ready
- Support 240mm Water Cooler AIO.
Chassis Size: 315*210*386mm
Case Size: 318*210*398mm
Package Size: 455*270*380mm
Motherboard Support: M-ATX/ITX
CPU Height: 165mm(Max.)
VGA Length: 310mm(Max.)
PSU Length: 140mm/160mm
Drive Bay: HDD*1+SSD*1
PCI Slot: 4
I/O Port: USB3.0*1+USB1.0*1+HD Audio
Fan Support: Top 120/140mm*2(Option), Rear 120mm*1(Option), PSU Shroud 120mm*2(Option)
Cooling Support: Top 240mm*1(Option)
Material: 0.45mm SPCC+ Tempered Glass.
FOR BUSINESS
👍 EMAIL: [e-mail]
👍 FACEBOOK: nerdcaveph
👍TWITTER: nerdcaveph
#coolman #coolmanreyna #aesthetic

[@gamertechlive1780]

Its a Negative air flow case so lower mounting fans should be high static pressure fan for intake since it pulls air outside from the mesh vents at the bottom corners of the case exhaust fan will also push air from those spot if intake fans are not enough.. surely not enough since 1x case fan intake is located above PSU so its restricted the result will be 1 intake vs 3 exhaust rendering the 1 intake above PSU semi-useless (not totally useless since it can still pull air from the gap of PSU & Fan but not really ideal situations). But overall this case is slightly smaller than regular M-atx case due and has a Aquarium Design which are only available for Dual-chamber cases.. Another Downside, you want a modular PSU with this case since if you use a non-modular PSU those cables can be seen since the bottom corners & intake fan mounting area all full of holes = See Through. Its all better not to mount an SSD or HDD at the bottom mounting area for more air to goes in since it has larger holes.. dust will build up inside the case since its Negative airflow but its easy to clean with just a Blower due to tons of holes in the case.. Overall a well-designed Negative air flow case.

[@kevinkingph]

this is a very nice detailed observation and review of the case. I really appreciate it. I actually like the every compact nature of this case since i have a small desk. and you're are 100% correct on the airflow, its more on the negative side. you really need a fan at the bottom of the gpu to somehow balance the aiflow. and yes, i had a bit of trouble in managing cables since i didnt use a modular psu. but I made it work and its a little bit messy... I also put the sata ssds and 2.5 hdd on the sides and not on the bottom changer for a better airflow. many thanks for your input. it can really help a lot of people looking in to this case. Its a cheap case but , so i cant really complain that much, it looks good and well made for what it is. but if they can make a revision of this case, and make it betterm that would be a huge plus.

[@renvergara5411]

same case sir black yung sakin all exhaust pa lng set up ko nowpero mas ok na 2 intake pa sa ilalim

[@kevinkingph]

Yes sir puro exhaust din ako now. So far ok pa naman temps pero plan on adding din sa ilalim

[@jeremiahjamilla22]

kumusta temps nyo? kapag nag games na ako mejo mainit e... nag 80 yung cpu then 70 ung gpu... intake yun likod, exhaust naman yung taas... any recommendation mga sir??

[@renvergara5411]

@@jeremiahjamilla22 Update sakin sir 2 intake sa ilalim max ko na is 65c pag nag lalaro

[@melgale]

natatanggal ba yung ilalim? paano mai screw yung mga fans dun sa baba? since sa ilalim ipapadaan yung screw ba?

[@kilikili968]

Tanung lang. Paano ko ma kabit yung 120mm na fan coolman reyna case sa lower part ng gpu. Need ko ba ng maliit na screw driver?

[@janedrinesteban5687]

isang 3.5 hdd lang kasya? I have total of 4 storage kasi, 2 3.5 HDD, 1 2.5HDD and 1 NVME

[@jayceniza7455]

Ganda lods tnx sa review nakatulong Sakin ❤❤ keep it up bro

[@kevinkingph]

salamat po :)

[@alvindre6639]

hi, im planning to buy this case next week. compatible ba to sa ATX motherboards?

[@kachaiki]

i dont think so, its only for Micro-ATX or ITX motherboards.

[@gamertechlive1780]

Correction lodi d dyan kasya Tri-Fan.. For Dual Fan only lng yan.

[@kevinkingph]

Thanks for clarification . I thought it was bigger 🥲

[@mathew6097]

any update po sa build nyo? plan ko po mg build gamit case na to

[@kevinkingph]

Will post the video this week

[@allannefs806]

temp wise po sir goods ba? kasi wala front fans ehh hahaha curious lang po

[@kevinkingph]

ok naman yung temps ko, never pa nagoverheat.

[@lakaymark]

Intake sa itaas?

[@jeremiahjamilla22]

kumusta temps nyo? kapag nag games na ako mejo mainit e... nag 80 yung cpu then 70 ung gpu... intake yun likod, exhaust naman yung taas... any recommendation mga sir??

[@kevinkingph]

Anong cooler gamit nyo sa cpu? Ako kasi never pa umabot 80 yung gpu at cpu kahit matagal ako naglalaro

[@chickenbreast4985]

Boss pano patayin rgb nung fan neto heheh

[@iScreamss]

Hi po possible po ba imodify yung lower case para mag kasya atx board ?

[@kevinkingph]

Medyo weird lang tignan. Pero kung pipilitin kakayanin naman i think. Mounting lang ng gpu ung concern

[@idanirrd3838]

Bumili ka nalang coolman robin atx case

[@opal.3386]

Thesame to sa mma sr89 case?

[@kevinkingph]

Yeah i think its the same

[@opal.3386]

@@kevinkingph kasya ba yung asus rx 5600xt dual fan? Thanks in advance

[@peenoise69]

kasya dalawang 3.5" hdd sa baba magkapatong?

[@kevinkingph]

isa lang ung pwede i mount. Pero may space pa naman para magpatong. Wala lang mouting

[@Angieabelinde]

Kasya po ba ung 120mm aio sa taas?

[@kevinkingph]

yes kasya

[@skr3163]

Kasya ba 6600xt?

[@kevinkingph]

Yes. Naka triple fan ako. Kasya

[@KyahJemz]

okay naman kaya airflow sir?

[@kevinkingph]

Ok naman. Acceptable ung temp. Nasa 76-78 deg ung max ng cpu

[@AlyssaTuangco]

Ganda ng casing 😊

[@kevinkingph]

yes po