Cord to Cordless Mini Grinder Conversion | MTR YM-850405

[@creativeashok3469]

I love your cordless conversation bro ..now can u convert a corded machine like 5kg breaker or other heavy machine to cordless... love from India bro❤

[@victimovtalent6036]

use truck battery😌

[@creativeashok3469]

@@victimovtalent6036 😂😂

[@MASI_forging]

What a great restoration 👍👍

[@marianpintilie7799]

Great restoration and conversion...This biggest msster always delivers new video with impressive skills🙏🙏🇷🇴🇷🇴😎😎

[@blindscience1701]

fastest hands at cleaning and filing master.

[@RestorationVideo]

Congratulations Very nice!.Top job. Very good recovery. The project conditions are very interesting. You did a great job!! It's great to revive that old machine. everything is still great as usual.. 👋👍🎉 👏 😊 😊 😊

[@aserta]

6:34 considering how many of these motors you've unwound/rewound.... i genuinely think it's worth your time to make a bobbin threader. Basically something that accepts any size of motor core, keeps it stable and gives you the ability to rotate it to specific positions, and on a given axis, using a jig, wind or unwind the enameled wire on or off the core.

[@MeilyFoodie]

Awesome as always ❤❤❤

[@larrykelly2838]

Neat little conversion.

[@khalilrabah2237]

Jolie travail toujours 💪

[@prasadvn524]

I wish you make a video of your shop and tools.Nice job

[@johnbradford9235]

What a cute little tool 😁😁😁. 😎

[@vinceianni4026]

Hello mister good job beautifully done

[@حسين-ج9ط7ي]

Great job, thank you brother. You are so talented thank you teacher❤❤❤ Great job, thank you brother. You are so talented

[@JoJoTavern]

Engineers had a field day with this tool

[@patrickmorrissey2271]

Great job. Looks like it really works, for a mini tool.....

[@lucasdcofficial]

Amazing work

[@Kudratbekk]

Золотые руки, восторг 🔥

[@nelchan2421]

21 : 58 of pure happines

[@markdunford3181]

This was very clever…thank you

[@ookychanel6403]

The machine make me happy 😍😅😁

[@TundeEszlari]

I love your videos.

[@nathkrupa3463]

Great work sir

[@luismsanchez442]

Great restoration, but be carefully with the glass powder, it produces headache and breath problems.

[@hgghgguk]

im assuming it would be for cutting tiles or cutting holes in plaster board or mdf since the front of it where the bade comes out is flat likes its meant to be press up against something

[@willardfasto4494]

could you give us a tour of your work room? I''m really interested in your organization area for bits and screw handles...etc

[@xtender5]

What an awesome little tool! I assume it's reasonably easy to find wheels for it?

[@goldenfor]

Good job

[@foodies_here_]

Love you sir ❤ I like yoUr woRk ❤

[@LeeMooEez]

That is the most complex motor I’ve ever seen 😂 P/S : everything is great as usual..it just that I’m curious how long would that plastic gear last with that additional huge rpm 😂😂😂

[@WCKD.]

Plastic gear? That white plastic thing is a fan for the motor. The pinion gear is metal.

[@LeeMooEez]

@@WCKD. that what I confuse about..that black gear look and sound so plasticy with scuff on it 🤣🤣🤣🤣

[@WCKD.]

@@LeeMooEez Oh, you ment that black one. 😁 Is it really plastic? To me, it looks like metal also, but surface treated. Hard to say.

[@BICIeCOMPUTERconGabriele]

Probably it includes the bridge rectifier, that he cut away when he converted it to DC

[@runehansen6825]

Why are you scraping the plating of the copperwire where the whinding is shifting row?

[@mouse454]

Made it better then new

[@Gift-fh4qw]

Won't the new windings reduce the torque but increase speed compared to the original?

[@docfisher8357]

Hi, be carefull dude. You increased rpm's. But what was the speed limit for abrasive disk 125 mm? Usually it's should be not more then 12000. Otherwise your disk can exploise. It's really danger. Stay save. And like for video.

[@rgodhnia]

What amaps under max load it takes and what's max discharge rate of battery, in long run does it effect battery life ?

[@СергейЖилинский-щ7г]

4лассный аппарат. Как всегда очень интересно смотреть.

[@Hang_bai_Can_Tho_65]

Vui lòng mài nhẹ nó theo cách xử lý dao cạo. 2 Nó được thiết kế để dừng động cơ khi ấn mạnh. Nếu 3 vòng quay dừng lại, hãy chuyển đổi Vui lòng tắt nó đi và đợi 1 phút. 4 Sau đó, nếu bạn bật công tắc, nó sẽ trở lại bình thường.

[@MasterFlex126]

Can you make a AC to DC or DC to AC cordless tool attachment with a chord. So you can use your cordless tools with a corded battery attachment???!!!!!!!!!!!!!!!

[@selimkurkcu]

👍

[@449shivakeshavamachani6]

Is there any possible chance to get a rc drill machine from you sir?.....

[@QuockhanhPham20]

if you can find the 3inch mini corded angle grinder from old Japanshop you will surprise with it

[@TheMagaiver40]

belo trabalho parabens

[@TanvirKabir0461]

Great, but you should make partition of your video.

[@davidepiccini9254]

Wow

[@denvut142]

is this the tool you then sell?

[@saidnozimasimov9580]

Hello bro, please make cordless drill from corded drill with using DC motor

[@garyjones2582]

Very nice work G.S....Are you in the mood to build me the world's most powerful flashlight? I bought one on the internet and it was not what they advertised...

[@Saber_Matrix]

👍💯

[@Domonkos89]

NEVER sand glass dry, because the dust does not leave the lungs!!!!

[@MarioMotoVlog]

Mogles blaszkę schować do czarnego pudełka z adapterem i nakrek by nie było tak wystających.

[@quocthanhtran5199]

“It’s perfect”

[@gear_show]

Thank you!

[@WCKD.]

I think you should try to electroplate old rusted/oxidized parts like screws, etc for better endurance and look.

[@davidhamm5626]

The extra work, chemicals, and time, will not make any of these tools, work better.

[@Misimpa]

First people watch in 360p

[@thebeast7690]

I'm watching in 2160p 🤤😍

[@hatttereki]

Nice job

[@DatBlueHusky]

also that blade is for cutting stone not metal!

[@DatBlueHusky]

you should have went brushless

[@hardyanpajero69]

👍😎🍺🍩🗜️🛠️

[@valentino_govoni_official]

i thought it was big 😶

[@clocknack]

I would of just slapped a cord on it because I don't like cordless

[@neuralhub3848]

It's time to move on to 3D printing. The adapters from the strip look archaic and boring.

[@victimovtalent6036]

made out of plastic?really?

[@Heymrk]

lolwut

[@davidhamm5626]

Maybe you could help hom with that!

[@MrWoolyMonster]

“Progress” and “improvement” are often two completely different things.

[@neuralhub3848]

@@victimovtalent6036 what do you think the chassis is made of?

[@25RAD]

I hope you've been wearing eye protection and respirator... That glass dust would be a nightmare for eyes, lungs and even skin.

[@gear_show]

Yes thank you very much 🙏🙏🙏

[@B4uneed]

Please think about your health. making this to a glass, is breathing that glass later. do not work like that. thank you very much for the video.

[@pocho9756]

Chiche

[@YAHOOOey]

Такой мощностью разве что проволку из алюминия пилить.

[@SergeyDemi4ev]

балансировать ? да ну , зачем