Corn Fodder Baling Is Tough.

[@codymulford6076]

Watching your rebuild videos and seeing the 4960 in the field is proof enough for me, that you can rebuild a tractor out in the barn

[@jbmbanter]

Thanks for the footage of William and Theresa. It's always great to see them and especially how that boy has grown!

[@pjweir9220]

Thanks for videos. Yours is the farming video I always can’t wait to come out. All the way from Sunny South Africa.

[@trossponsor9077]

Watch your back brother

[@FarmerTom08]

TROS SPONSOR why ?

[@SteveHolsten]

Sounds like the rings had to seat to stop using oil. I was glad you decided to keep this tractor. I remember when you were about ready to part ways with it.

[@wasteoftime727]

The original 4960 rebuild was how I found your channel and have been watching ever since.

[@SteveHolsten]

I started watching when Wes & Timothy power tested a Johnny Pop against a Farmall pulling heavy loads.

[@chevymetrodriver]

I think I found his channel when the tractor burnt and have been here ever since

[@rharris5811]

I started watching when the 4960 burned too. I remember the cannon and blowing up the inner tube with acetylene.

[@ollie-lk5dx]

You finally got the rings to seat. It's great that you can take the family along on you bailing business trips.

[@clearingbaffles]

Joe was trippin' the light fantastic ;)

[@4gauge10]

William has grown a bunch since I last saw him Wes/Teresa. It won't be long he will be playing with that 4960 like a Ertl toy.HAHA!!.

[@jameslodge4258]

The end of this video was the best momma loves her boy and tje bald guy behind the camera.

[@2ToneWalt]

I love that 4960, the stace of the tractor, the sound of the engine, I know its basic, I know its smelly and noisy and I think thats why Tim likes it so much as well as the sentamental factor.

[@whiteout1962]

Thanks for the cameo Teresa and William!

[@tobeymazda4970]

Hi Wes, Thanks for the great video :-). Here in Ireland there is a company that makes air compressors that fit on either front or back of a tractors PTO shaft . Many benefits. Namely fuel , space , transport and having access to air anywhere in the field . Maybe you have this type of unit in the states Wes !? All the best and safe working . :-)

[@FILIPFROMSALMO]

man i needed an olf video today. wes i sure hope you are making a living and keep making videos

[@stevenbeauchamp1320]

You'll not be too far from me once you get to painter VA. Cape Charles VA is where you will be going near Bay bridge tunnel. Go to a restaurant called The Oyster Farm. Right on the bay. You will see a beautiful sunset. Great food and cold beer. Enjoy the Eastern shore while you are here. Maybe I'll see you in the travel on RT 13 heading south. Good luck and take care.

[@arfarms5711]

That shredder does a beautiful job. That would be sweet to no till wheat into. 4960 is running like a champ. My favorite tractor you have! Which he I love all of farming

[@michaelbrown8545]

Wes, try just leaving that 4960 engine oil a quart low on the dipstick it may just stabilize at that level and stop consuming oil. Every engine is a bit different. Cheers mate 🍻

[@paulcopeland9035]

Did you watch the video?

[@petrokemikal]

4960 is just a chunk of Iron parts... Sumthins worn... stick in a new one and off she goes.. Fantastic old tank of a tractor !!

[@TheRealJesseStoltzfus]

Ryan is a good fellow. Glad he was able to help you out!

[@nickm8358]

Jesse Stoltzfus got that right! Ryan is a great guy!

[@1996turbocamaro]

Wes nice video! Looks like the 4960 engine is officially for the most part broken in now... as you know oil consumption is kinda normal for some engines until they get broken in. Glad to here the Hiniker is working out well for you Wes!

[@harris.anthony36]

Good work Wes the 4960 sounds sweet. Loving these combination vids 👍

[@mikehornsby599]

Great job enjoyed that , William is growing up to fast!!!

[@MustangsTrainsMowers]

Corn stalks are tough. Our neighbor popped a tire on their Honda ATC 3 wheeler.

[@rogerquenault7207]

Wes you should know the smoke is from the extra power needed to spin those main bearing Huh and you said you know what your doing 😂🤣😂🤣 Nice shot at the end its nice to see the family are happy and well.

[@spence5627]

Hopefully we will see you plant some corn next year. Knowing now that you take the fodder to the mushroom barn.

[@leol1682]

Very good video on the 4960 and the family too .have good day .

[@SlipShodBob]

Wish my dad had that wherewithal to not run our hedgecutter minus a flail ignoring the small blocks they weld on it to balance it which screwed the bearing and shaft. After getting the price for a new head and one for a complete new cutter he decided to run it until it shook itself to death it which took about 6 to 8 years was was noisy and headache inducing but taught him a valuable lesson not to run it without a flail

[@jeremysmits9784]

Boy has william is getting big! He’s going to be quite the handful if he’s ever let to run free!

[@kluckfabrication5991]

Sounds like you need a flatbed tractor trailer down there if your driving 65miles with a tractor.

[@leejamestheliar2085]

Broken in rings set ,good deal. Bearings spinning ✅

[@Mark_Tschetter]

It takes time for the rings to seat properly. Newly rebuilt engines burn oil and have blowby that's normal.

[@GundamZero5]

Cute William getting big

[@FAL0perator]

Thanks for the new content!

[@hoodwinkedbyanangelmichaelfazi]

YES INDEED , i WANT TO LEARN FARMING.... Hi Wes... so much to learn

[@thepizzadevil7392]

thats a good sounding tractor

[@clearingbaffles]

Are you still sending some bales to the mushroom composter in the walking floor trailers and getting the leftovers back as fertilizer

[@ericluitjens4256]

We bale ALOT of stalks where we live in Iowa. 20% moisture is very wet for stalks. They are going to heat. We generally let them dry 4-5 days after combining. For mulch you will be fine with them keeping, but they would never work for bedding. The slabs would be like concrete. Also I'm surprised your knotters were working. If I try to bale green stalks the needles pull them into the knotters and I misstie all day long.

[@noc8076]

Wes, have you looked into a switch blade turbo for any of the tractors? Could help with the black smoke. Jpaydirt swears by them.

[@lawrencelacenski9781]

NoC yes sir Jpaydirt loves the switchblade turbo made by blaylock turbo in Baxter springs Kansas. He said that the switchblade turbo has doubled the oil life and I am not positive but I believe that he was also able to turn down the fuel and adjust the air fuel rate using less fuel without sacrificing power. The switchblade turbo also almost eliminates turbo lag. Check it out on KZbin Jpaydirt switchblade turbo

[@lawrencelacenski9781]

NoC one of the negative issues might be the possibility that he might to change or have a custom exhaust manifold maybe unless blaylock would design a bolt in replacement for the 4960. According to Mr Jpaydirt Jim blaylock is an awesome guy a real turbo nut willing to work with anyone. I think that he would work with Wes just fine because Wes is also a very knowledgeable guy

[@michaelbrown8545]

@@lawrencelacenski9781 he did not turn down the fuel. He adjusted the air fuel ratio control which controls the speed of the rack opening so the fuel being injected matches the air volume. Less black smoke = less unburnt fuel = cleaner oil. Otherwise you are absolutly correct. Also keep in mind that the engines Jpaydirt runs in the old B scrapers and H dozer are 30 to 50 years old the diesel tech is very basic, the C15 in his Kenny is much more current and also responded well to the switch blade over the compound boost turbos. Cheers mate 🍻

[@lawrencelacenski9781]

Michael Brown thanks for the correction sir it’s been a while since I’ve watched the switchblade turbo series. That 4960 is almost 30 years old so if Wes wanted to put one on I think that it should be fairly simple because I am fairly certain that the engine is mostly mechanically controlled out of possibly a electronic fuel shut off

[@wiboersbeefandbaling7923]

You be happy to be done with the corn stalks..for a little while anyway lol

[@clearingbaffles]

Doesn’t spinning bearings help with oil consumption? Thanx from the left coast near the Krapitol of California

[@jamesnauert7844]

I like the fact that you do what it takes to make a living

[@joshreed7908]

That hiniker is basically the same thing as a poultry house shredder

[@Boot_185]

That little boy of yours is getting big fast. Independent just like his daddy nothing will get in his way to do what he wants to do.

[@briangold6483]

Good video Wes we all love you up home 😘

[@brianconway5747]

Great video keep them coming

[@jtn-minn8105]

20-25 moister,aren't you (they)worried about the bales heating in your piles? When ever I've baled at them moisters if I don't run acid the bales warm up pretty fast if the pile is stacked tight.

[@benjaminstockton3917]

Good video Wes

[@mikecooper5533]

Not sure it’s been along time but if you turn back the fuel pump a turn or so you should be able to stop the unburnt fuel on start up with no drop in power

[@1armedguy4]

Someone is a toting mom, nothing wrong with that. Cheers🇨🇦🇺🇸

[@mikegoodman447]

Really need to have your injectors checked or rebuilt. Black smoke can be related to bad injectors even though the engine runs fine.. The injectors could may not be atomizing the fuel properly and could lead to engine damage. Really a cheap preventive measure and could actually save you money in fuel savings. Bad injectors waste fuel and fuel is money.

[@clearingbaffles]

Tripping the light fantastic

[@backwoodzcustomz1549]

I work at a salvage yard and sell a ton of parts to Giorgio in berks county...

[@s.pursell8901]

How many hours do you have on the 4960 since the recent rebuild? It definitely sounds like its running like a champ. I'm guessing your close to 100 already.

[@mikepagel1021]

Just listen to those bearings spin

[@John-viheavyequipment]

looks like its over fueling maybe the air filter is a bit pluged?

[@gilllandaverde8918]

Do ya eat those??

[@jarridcockey3810]

Sounds making the 4960 earn it's keep as a good ol tractor. It's funny how my mother sees a little bit of black smoke come out of the exhaust of diesel motor. I say mom that is perfectly normal for a diesel to do it.

[@shoresharp8349]

Cape Charles Va. Dang Wes you guys have been getting it.

[@jonyknoxvil]

All the best to you and your family. Good job

[@digitalshackonthelane]

Love the rebuild!

[@stuartsplace100]

"WOW"need to put the peddle to the metal Wes

[@jankotze1959]

Cool video

[@derekgordon1763]

Did you get all of your hay made?

[@Edwardmodos]

re: freightliner FL70 comment previously, google "Asplundh Tree Care 2008 Freightliner M2 AWD/Terex"

[@jimmystuckey1412]

That boys getting big

[@copperheadranch976]

It spun a bearing! Lol

[@rogerjennings5846]

65 miles that would be hard on tractor tires

[@jasonkotara2135]

Nope, that's custom work.

[@jaydee125b5]

Good video

[@arfarms5711]

Hey y’all, question?? How much does a bale of corn stalks like these go for?? I know Wes don’t comment, so if anyone knows I’d appreciate it. And I understand him not commenting. He’d never get anything done if he stayed on jutube responding to ever comment

[@onelonleyfarmer]

A&R Farms $95-$130 a ton. These are 1200-1400 lbs each

[@arfarms5711]

onelonleyfarmer I sure appreciate it! Was very curious bc that’s an awesome idea to make some extra especially with wheat going in behind corn. Awesome job Wes

[@hanratty450]

Wait, did you just saying your driving the 4960 65 miles to another farm. Sounds like a long ride

[@arfarms5711]

hanratty450 I’m serious! Dang that would be a long ride! I’ve seen ppl do it though. 20 miles from home base is far as I’ll go. It would probably be crazy aggravating to haul though. Have to make two trips w truck to haul his rig w that long/wide chopper. No way it’ll both go on lowboy

[@SKC640]

hanratty450 I bought a 4010 from an auction back when I was in highschool, and ofcoarse the guy I hired to haul it baled on me and I had to drive it close to 50 miles home that night. Never again will I do it again unless I had a cab this tractor was an open station. Plus It was in early December in MN so it was cold.

[@lukestrawwalker]

@@SKC640 I drive tractors 90 miles between our two farms now and then-- it's only a 6 hour drive on a Ford tractor LOL:) OL J R :)

[@SKC640]

luke strawwalker screw that lmao do you even have tire tread left after a round trip? Lol

[@jackwillie2729]

@@SKC640 froze my fingers many times plowing with no cab on the 4010 back in the 60s to 70s ...a Lot of late nights , seem like those colder nights added hp to draw bar...I'm sure you face was chilled

[@stanleyjones4180]

great video wes enjoyed it thanks

[@genechronister7085]

Great vid!

[@canuckloyalist4681]

How many bushels to the acre did they get this year?

[@chevymetrodriver]

Bushels of what hay?

[@canuckloyalist4681]

@@chevymetrodriver I don't think I have ever seen hay sold by the bushel. The key word being "they" in reference to the host farm I was wondering how their CORN crop yielded, being as OLF was there baling corn fodder....

[@chevymetrodriver]

@@canuckloyalist4681 lol yes I see that now I misread it the first time

[@williamriley2528]

You have to haul all of those corn fodder bales back to the Jersey mushroom barns...??? That Sucks...

[@stewartflannagan3734]

I think he's just contracted to do the bailing, Wouldn't be bad if he had the trucking contract either, money is money.

[@williamriley2528]

@@stewartflannagan3734 if he's trucking those bales back to Jersey to the mushroom barns then I'm sure he's getting the money for the Corn Fodder Bales...

[@archieflunker2252]

Luke, I am your fodder.

[@lukestrawwalker]

The Emperor has been expecting you... We would be honored, if you would join us... I find your lack of faith disturbing... LOL:) Later! OL J R :)

[@southernlonewolf798]

He's growing like a weed. Before y'all know it he'll be running them tractors with yall

[@johnnyholland8765]

Real tractors blow black smoke.............

[@jamesdayton9530]

You are in the best place to get Crab Cake SandwichedYou are in the best place to get Crab Cake Sandwiches. Crabs from the Chesapeake Bay area are the best in the nation.

[@dlmarquart]

4960 sounds strong

[@delta1066puller]

Perfect overhall

[@gdsteyr]

Loving the black smoke Greta Thunberg would love it too Haha.

[@georgegooding57]

Boy's growing like a weed. Won't be long before he's driving for you.

[@thirrybelisle]

Good morning

[@richardmcferrin9847]

Good luck

[@farmboytrucking21]

Georgi don't hardly pay anything I called bout their add other day and the said 90 a ton and at auction is morw

[@warrenpost1502]

Uneventful are the best days

[@blanequilhot6876]

good Morning Wes

[@AlextheDutchDairyfarmer]

👍👍

[@WilliamTMusil]

Mornin Wes

[@stephenpaget3660]

Too green maybe

[@mrdfarms9373]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@greggmckinney9171]

Ck the oil

[@JACKATTACKED]

👍

[@advandervelden1588]

Comment

[@lawrencelacenski9781]

2 nd