Correction Due to Pull or Tension | Taping Corrections | Surveying

[@geriowenwagayen1226]

I usually skip ads but for you sir I'll gladly watch them! Thanks for the easy-to-comprehend lectures!

[@miguelbernabe7535]

Sir im a student from VSU ill recommend your videos for my schoolmates in geodetic engineering. Its very helpful thank you

[@jonilenecabarrubias2724]

Hello Sir. Your vids are very useful especially in this online class. Mas marami pa po kayong examples at mas naiintindihan ko pa po nang mabuti yung lesson ko as a Civil Engineering student. God speed po Sir. Napaka helpful po talaga ng vids ninyo. 💞😍

[@jehnerbumal-o8402]

Dakkel iyaman ko kanyam sir karo tadta nga pandemic nga puro module ken awan discussion, ket adu naadal ko kanyam. Salamat sir God Bless sir

[@leighyuuuh5352]

Thank you so much for all your videos sir mas naintindihan ko and it is very helpful po specially sa Fundamental Surveying na subject namin

[@kweyneeb5347]

A line recorded as 472.90 m is measured with a 0.65 kg tape 30.005 m long with cross-sectional area 3 mm² at 20°C under a 50 N pull. At the time of measurement the temperature dropped to 5°C and the applied pull was 75 N. The line was 3% grade, E = 200 GPa, α= 0.0000116 m/°C.

[@eloy7165]

A distance was recorded as being 471.37 ft at a Temperature of 38⁰F. What is the distance when corrected for temperature?

[@jakelloren3255]

Sir, what if the tape is too short and the Csubp is -0.0034m. Do we include the negative symbol of Csubp when finding for L'. Like this L' = L - (-0.0034m)? Or is the negative sign on the Csubp just an indicator.

[@JonasClassNotes]

I think the negative sign is the indication of the "too short" description. You do not need to use it again sa calculation.

[@zarvinomozar1586]

Sir whag is elonggation of a steel tape wheng used for measurement in a vertical shalf?

[@zarvinomozar1586]

What"

[@lalkhan4296]

Question: 11. A Base Line Was Measured To Be 150 M Long With A Tape At A Field Temperature Of 27°C, The Applied Pull Being 14 Kg. The Tape Was Standardised At A Temperature Of 15°C With A Pull Of 8 Kg. If The Designated Length Of The Tape Is 20 M, Weight Of 1 Cm Of Tape = 7.86 G, Total Weight Of Tape = 0.8 Kg, E = 2.109 X 106 Kg/Cm² And Coefficient Of Expansion Of11.2×10^6 find true length of tape?please solve this question

[@kurddd_2]

sir when we use (+) and when we use (-) please ???!

[@bayagko]

new subscriber po..very helpful mga videos ninyo ,,Thanks and continue sharing.... :)

[@jonathannathan6436]

Salamat sir ... Dakel a tulong kinyami nga studyante ❤️

[@johnwilliamtolentino6384]

Very helpful sir! THANK YOU!

[@NoOne-rf6vf]

So para po makuha yung cross-sectional area, i-didivide lang po yung weight ng tape sa length ng tape? Hindi na po kasama yung gamma?

[@JMDSchwindler]

thanks a lot Sir. sasagot alng sa surveying eh

[@jomargako5721]

so helpful ur vids sir / thank u

[@imprintdesign7208]

saan po makikita ang mga constant ng gamma?

[@distorjetbrianh.1415]

Hello po sir, tanong ko lang po sana kung pano po malalaman kung too long or too short po ung tape? Salamat po.

[@JonasClassNotes]

Hello. Compute mo ang correction gamit ang formula. Kapag negative lumabas, ibig sabihin too short ang tape. Kapag positive, too long.

[@distorjetbrianh.1415]

@@JonasClassNotes okay po sir.. salamat po nang maramii :)))

[@cosmicxistence3428]

sir ano pong book gamit nyo?

[@JonasClassNotes]

Gamit ko book ni Sir La Putt dito sa mga videos ko sa horizontal distance measurement.

[@cosmicxistence3428]

@@JonasClassNotes thank you sir

[@angelicalasala629]

Sir, pano po makuha ang unit weight ng steel kung ang given po ay weight and length lang?

[@angelicalasala629]

ang given po ay in^3 ng steel at ang pounds nito

[@JonasClassNotes]

Weight/volume lang Lb/in³ ang magiging sagot.

[@angelicalasala629]

@@JonasClassNotes maraming salamat po

[@JoshuaMickaelle]

sir feedback lang po, hindi po kasi gaano audible yung volume ng sound niyo

[@chilledcow2272]

Sir, lilipat na ako ng school. :)))) Bakit siya pinapaliwanag niya lahat prof ko bigay lang ng formula tapos binabasa lang yung formula? ._.

[@binsoy8163]

gago cguro yun hahaha

[@chilledcow2272]

GUYYSSSS ISHARE NATIN YUNG KZbin CHANNEL

[@peregrinarizannkaeya.8910]

hi po pede magtanonggg?

[@JonasClassNotes]

Pwede naman po

[@peregrinarizannkaeya.8910]

@@JonasClassNotes pa'no po kung di given ang Modulus elasticity at cross sectional area? may constant value po ba sila?

[@JonasClassNotes]

@@peregrinarizannkaeya.8910 Ang modulus of elasticity ay innate sa material. Pwede mo isearch kung ano ang modulus of elasticity ng isang material. Kapag A36 steel, E=200 GPa.

[@peregrinarizannkaeya.8910]

@@JonasClassNotes steel tape po? 200 gpa?