Corsair 3500x ARGB Review - two different builds in one video

[@3_kids_one_shot726]

This is such a great case. The case itself with no fans is only $90 is the U.S. great video sir as always!

[@TheProvokedPrawn]

Yeah it's good value. I should have talked about that. I'm building in another case now that's the same price and is nowhere near as good quality.

[@itsprod.472]

The version without fans is definitely a good buy if you have fans already or wanna buy a different set like the RS series of fans (the cheapest new fan lineup from Corsair) only downside those aren’t ICUE link

[@RLJSlick]

I really love those Corsair cases, they are expensive, but love the design. Great video!

[@TheProvokedPrawn]

@@RLJSlick the standard version is £89, the ARGB is £120. That's not expensive imo. Very reasonable for the quality.

[@igm1571]

what about NZXT ?

[@carson6131]

@@igm1571i'm going to do a build for christmas and corsair 3500x is currently 75$(without fans) while NZXT is H6 is currently 110$(cheapest) option. I'd rather have the H6, but money talks

[@igm1571]

@@carson6131 i think you should buy a case with pre installed fan, corsair and nzxt is just way too expensive while doesnt bring any major features from the case, you could take a look Montech and Deepcool, their case are very high quality and the price is also affordable too, and also come with pre installed fan.

[@Mohawkchris]

Very beautiful case! I want to change mine up a bit. I have a Fractal Torrent and love it, but I get bored after a year and always want to change it out.

[@TheProvokedPrawn]

Fractal has a new case out that's getting good reviews. I personally like this and there's some cool things coming from others coming in October too (watch out for videos!)

[@Mohawkchris]

@@TheProvokedPrawn I'm really into those Hyte cases with the screens right now.

[@rmorenberg]

I just built in the case and used the Titan 360 as well but I top mounted it. I do like it as well. I used the black version with only 6 rx120mm fans in at the moment but I have an RX 140mm for the bottom and a black rx120 for the rear if I need or want to add it later. So far I am happy with it.

[@TheProvokedPrawn]

👍

[@EstablishedOne]

I watched this vid a few time and I'm going to put my liq cooler on the side like you did. My first time building a PC, I think I got this now 🤞

[@TheProvokedPrawn]

I have a build guide too if it helps.

[@MASTICOR718]

I'm torn on the case. Coming from a 4000d.... I love the look. I found it simple to build in but had poor thermal compared to before when I had all the same hardware other than the 3 additional fans with the case. Moved the 240mm around no help. As of this writing I'm installing a 360 in hopes of better results. Otherwise I'm going back to the 4000d.

[@normified]

Another great video, gonna upgrade my case soon and use this beauty. Not an RGB guy though, I'll just slap in the Lian Li P28s for that clean-white look. Only gripe would be that the "filter" on the side seems to be metal, metal "dust filters" have never done much since they aren't fine enough to grab small particles and are thick so they restrict airflow. Guess I'll make my own, haha

[@TheProvokedPrawn]

Thanks for watching!

[@zekken2423]

Thank you for the review. I fell in love with the case at first sight. I think it's time to switch to a new one.

[@TheProvokedPrawn]

Glad I could help

[@tr1ksh0t88]

do you think this case will have enough airflow for a 4090 with 8 fans?

[@scottrobeson7513]

Do I need any extra cables to connect all 10 of the fans/icue? I’m building mine next week. Does it comes with everything I need to connect?

[@TheProvokedPrawn]

This might be useful kzbin.info/www/bejne/Y5vIf2SjadJpY7c

[@cheekster777]

Thank you my friend.

[@rn.v4629]

u sure the radiator in/exit at the bot of the radiator is good? shouldnt it be higher than the cpu block itself? i always tought that was the way to go due to bubles in the system. but i might be wrong

[@TheProvokedPrawn]

kzbin.info/www/bejne/p4LGqox-fNl0qNU

[@rn.v4629]

@@TheProvokedPrawn thanks alot!

[@yashs98]

Could you tell me, Which RGB you have used? Corsair LL 120 RGB?

[@notniex]

Can I install 3 of the 120mm fans on the side ? Or is it 140mm or can I do both

[@TheProvokedPrawn]

120mm yes

[@notniex]

@ what about in the bottom

[@calldeltosell]

I think I am having a deja vu moment. They (white RGB fish tanks) all start to look alike after awhile. It's just me I guess.

[@TheProvokedPrawn]

🤣

[@gman8105]

Did this PC case come with GPU bracket that you showed in the video?

[@TheProvokedPrawn]

No. It's an additional purchase

[@sinnermac6338]

good looking build

[@TheProvokedPrawn]

Thanks

[@brandon_907]

With side mount, any concerns with cooler being above hoses in radiator? Potential air at highest point

[@TheProvokedPrawn]

No kzbin.info/www/bejne/p4LGqox-fNl0qNU

[@rosoms]

would you put this above the 4000d airflow? trying to buy a new case for my pc and was wondering if buying the 3500x would be the way to go.

[@TheProvokedPrawn]

Personally yes. It has better airflow and looks nicer.

[@rmorenberg]

Hi again this time not a question just a statement. I used the Corsair Titan 360 AIO in the 3500x case which has been great, so I did a pump head swap and used the screen head and my coolant temp and package temps are on my rig about 10 degrees cooler than the H150i on my build in the 6500x case. same 14700k CPU's and both in ASUS boards the Hero BTF for the 6500x and the Dark Hero for the 3500x. I'm debating if I should get a Titan RX360 for my main unit, the 6500x build.

[@TheProvokedPrawn]

Corsair would like that mini review 👍

[@rmorenberg]

I had another dumb question regarding the new Corsair Titan 360 AIO. which is better to use the AIO pump header on the MB or the CPU fan header? I've used both and am not really sure if there is a definite difference? or does it really matter?

[@TheProvokedPrawn]

Generally I think it doesn't really matter

[@rmorenberg]

@@TheProvokedPrawn thanks I had that in the back of my head. thanks for the response.

[@phsavatage8681]

Does it only have two ssd drive mounts?

[@TheProvokedPrawn]

Yes

[@jordanmarazzi]

Only ? I don’t understand pcs I got all my parts and this case going to build on Sunday but I heard I should get another ssd ?

[@phsavatage8681]

@@jordanmarazzi I probably could get an aftermaket mount for the front where a fan is on but it looks like it only comes with the two mounts at the back by default. I need more than two drives 🤣

[@jordanmarazzi]

Hey is the intel core i5 14600k compatible with this ?

[@yashs98]

I want to assemble a pc.. components are i) MSI Mag z790 Tomahawk wifi motherboard ii) Intel i7 14700k iii) ADATA XPG (16×4) 6000 MT/S DDR5 RAM iv) Samsung 990 pro 2TB with heatsink SSD v) NVIDIA 4060 graphics card vi) Cooler master 360 pl 360 flux liquid cooler vii) 6 Corsair LL 120MM RGB LED Fan For these specifications which SMPS would have been better Corsair RM 1000e or 850e or 750e? I'm very confused.Please help me.

[@TheProvokedPrawn]

Use this outervision.com/power-supply-calculator

[@airzeroHD]

I'm buying this case for my 360mm Aio

[@TheProvokedPrawn]

Interesting way to do it

[@nhanstorm]

After I saw where the aio was placed, there is no creditability for this channel 😅

[@TheProvokedPrawn]

Ok. You clearly need to learn a thing or two

[@nhanstorm]

@@TheProvokedPrawn the AIO inlet needs to be higher than the pump, one of the builds where the inlet is at the bottom of the case when it's supposed to be at the top. The air gets trapped at the top of you do it that way, bro just looked at the first tutorial and was like yep that's good.. doing it that way will severely shorten the lifespan of the aio cooler

[@mochachocolattevanilla]

Love your videos

[@TheProvokedPrawn]

Thank you.