Thank you for posting this, I must of read the manual like 8 times trying to figure this shit out lol. Really helped me to watch someone do it.
@cosmicway40486 жыл бұрын
I actually had this video running while I did the procedure, a john deer mechanic down loaded it to a thumb drive off of his shop computer, he also loaned me all the tools needed but they are simple enough to improvise.
@Panelson74 Жыл бұрын
@@cosmicway4048 I would love some help on the tools, they are essentially discontinued now.
@colbypatterson45527 жыл бұрын
This video has been really helpful! It references the "valve train instructions". Where did you get this video? Do you know where I could find those valve train instructions?
@cosmicway40486 жыл бұрын
Colby Patterson a mechanic at John Deere gave me it off of his company tech computer, I just had the video to fix mine...I hate that the cam gear is pressed with that bolt with out a key way
@cosmicway40486 жыл бұрын
Colby Patterson I was lucky the guy let me use his gauges after seeing how they work I could do it with out them
@jschenkyou4 жыл бұрын
I have a 2.4 in a sullivan-palatek 185cfm compressor. It starts and runs fine but seems to be over-reving I put a tach on the flywheel and I'm getting 3450 rpm. How do I regulate that back to 2650 rpm? Thanks
@DanielRodriguez-rf5eb3 жыл бұрын
check the acceleration screws and adjust the stop until you reach the rpm you want...
@GondorsModernKnight Жыл бұрын
My boss just gave me this job knowing ive never done it before and told me to do this at 2pm. Needless to say i just put in my 2 weeks notice
@cosmicway4048 Жыл бұрын
i never did anything like this before, im just a truck driver, but watching the video that john deere tech gave me made it easy,
@cosmicway4048 Жыл бұрын
it is my grandsons tractor, that was 7 years ago, still running, seems to me i split the tractor to get the front assembly off, rad and stuff, i replace all the injectors, but what happened is the cam gear came loose, that gear is pressed on a taper, no keyway, crazy
@cosmicway4048 Жыл бұрын
i thought he traded it in, but the other day he pointed to a tractor in his fleet, said, remember that tractor, lol
@JoseTorres-hd6sd Жыл бұрын
Muy bien muchachito 👏👍
@josepinto41842 жыл бұрын
Quiero saber como se sacan los inyectores de ese motor para
@davidzapata39982 жыл бұрын
Tengo una maquina un 323d con motor electrónico John deere 4024 y no lo puedo encender no tengo información
@margaritarojasfrez23545 жыл бұрын
hello I would like to know if the video a second part
@cosmicway40485 жыл бұрын
margarita rojas frez don’t really know, this was all I was given, I know this much I used this procedure on my grandson’s tractor over 2years ago and it’s still running good
@pallotey8105 жыл бұрын
This engine is obviously poorly designed.
@CarlosGarcia-zq9ij6 жыл бұрын
yo tengo varios moteres de este tipo encienden muy bien , aceleran bien pero cuando le metes carga pierden potencia y se apagan.
@DanielRodriguez-rf5eb3 жыл бұрын
Pues porque las bombas de inyeccion ya no tienen la presion requerida
@CarlosGarcia-zq9ij3 жыл бұрын
@@DanielRodriguez-rf5eb ya se mandaron reparar las bombas y siguen en la misma
@DanielRodriguez-rf5eb3 жыл бұрын
@@CarlosGarcia-zq9ij 1er y gran error de todo el mundo... esas bombas no se pueden reparar. Se deben de cambiar por unas nuevas. No hay manera de reparar ni la bomba ni el inyector del JD4024 ó el JD5030
@DanielRodriguez-rf5eb3 жыл бұрын
@@CarlosGarcia-zq9ij o suponiendo que ñas bombas esten buenas. No deben estar bien ubicadas en el punto que es. Puede estar erroneo el tiempo de inyeccion
@CarlosGarcia-zq9ij3 жыл бұрын
@@DanielRodriguez-rf5eb gracias mi estimado, de hecho fijate que tal vez sea eso , ya que hasta hemos cambiado las bombitas y los inyectores de otro motor que esta en buenas condiciones y aun a si no jala, lo que hemos optado es cambiar de motor al 4045t power tech ojala y me pudiera ayudar mas usted por que e pensado en que si me llega a quedar un motor de estos 4042t he pensado en meterselo a un carro , pero no se si tenga que cambiar la relacion o algun ajuste en las bombas para que sea veihcularl
@luislorenzini95902 жыл бұрын
Y la puesta apunto de el árbol de levas con los balanceadoras
@JorgeDiaz-ij5bn6 жыл бұрын
donde puedo encontrar un técnico para este motor??
@cosmicway40486 жыл бұрын
Dónde estás. Tuve que arreglar. en los Estados Unidos están en todas partes.
@CarlosGarcia-zq9ij6 жыл бұрын
yo tengo varios moteres de este tipo encienden muy bien , aceleran bien pero cuando le metes carga pierden potencia y se apagan.
@cosmicway40486 жыл бұрын
Carlos García sounds like you might have a fuel filter problem or fuel pump, does it happen to just one or all your engines, if so might be the fuel
@CarlosGarcia-zq9ij6 жыл бұрын
to all engines, in fact I have to replace them with the 4045t engine
@gustavodaza26686 жыл бұрын
Hola Desde Bogotá Colombia me gustaría fuera el vídeo en español Tengo un equipo John deere
@victorleites84685 жыл бұрын
Hola necesito manual en español, gracias
@cosmicway40485 жыл бұрын
Hola perdon no lo tengo en espanol solo English
@victorleites84685 жыл бұрын
@@cosmicway4048 Hola gracias por responder tengo uno de estos motores en un compresor Sulliar 185 funcionaba perfectamente hasta que dejó de encender .: Todo está correcto suministro de combustible , compresión correcta ,ausencia de aire en el sistema de inyección .Pregunta podrá ser la válvula de avance en frío que esté dañada ?? Tengo forma de anularla para verificar ?? Atento a tus comentarios ,te saluda Víctor
@cosmicway40485 жыл бұрын
@@victorleites8468 hola, I cant find anyone to translate to English for me, as soon as I do I can answer you
@josecastro30755 жыл бұрын
@@cosmicway4048 hola soy mecanico y me interesa tener ese catalogo de reparacion como lo puedo lograr
@yaderalejandromendozataraz10183 жыл бұрын
@@cosmicway4048 hola me gusta poder tener esa catalogo de compresor en ingles me lo podrías compartir a mi correo yader.alejandro.mt@gmail.com
@malcolmgeorge2 жыл бұрын
I have a 3 liter that doesn't want to start. If you give it a little starting fluid it will fire up and run all day. Sound familiar to anyone??
@malcolmgeorge2 жыл бұрын
I might have found my issue. I pulled the aneroid off the block and found a broken off grease fitting in there! No idea where it would've come from, but I think it was holding the linkage up keeping it from getting full fuel on startup.
@84gssteve6 жыл бұрын
Gawd, I hate these engines. Good thing there is only one in our fleet and its been lightly used.....
@cosmicway40486 жыл бұрын
Steve po my grandson has 3 and he hates them too. The cam gear came loose, I hate that there is no keyway it's crazy.
@justinianosalazar78712 жыл бұрын
Acuantas errepem de trabajar esemotor
@gemahaydeecruzgonzalez-hk3by9 ай бұрын
Cómo lo veo en español
@arnobilbaronecheverria96674 жыл бұрын
good afternoon someone knows how to set the injection pumps of a john deere on time * PE5030T173216 *good afternoon someone knows how to set the injection pumps of a john deere on time * PE5030T173216 *
@Panelson74 Жыл бұрын
John Deere JDG10245 Service dial indicator New; Original 1 pcs John Deere JDG1854 Injector Wrench New; Original 1 pcs John Deere JDG1704 Flywheel turning tool New; Original 1 pcs John Deere JDE81-4 Timing Pin New; Original 1 pcs John Deere JDG1678 Hydrolic Bleed Down New; Original 1 pcs John Deere JDG1823 Rack Holding Tool New; Original 1 pcs John Deere JDG2073 Fuel Control Rack Tool New; Original 1 pcs
@cosmicway4048 Жыл бұрын
My buddy at JD let me borrow those tools helped alot
@Panelson74 Жыл бұрын
@@cosmicway4048 yeah, I was going to ask if you had them for sale.
@cosmicway4048 Жыл бұрын
@@Panelson74 it was my grandsons tractor,he traded it in after a year, and just traded that one in lol
@cosmicway4048 Жыл бұрын
i thought he traded that tractor in , but in fact he still has it
@pablosolis31592 жыл бұрын
Traducir aespañol
@CarlosRamon-w8q Жыл бұрын
Español hablado
@aeroguy865 жыл бұрын
What a piece of shit engine! Waaaaaaaaaaaaay over implicated