JOHN DEERE PENCIL FUEL INJECTORS REPLACEMENT Made Easy | John Deere 4.5L 6.8L POWERTECH

[@PistonShack]

More John Deere Videos: JOHN DEERE FUEL LIFT PUMP REPLACEMENT | JOHN DEERE POWERTECH 6.8L 4.5L kzbin.info/www/bejne/i6TYo5WhqZaBbZY TREE STUMP VS EXCAVATOR or HOW TO REMOVE STUBBORN STUMP | John Deere 2054d kzbin.info/www/bejne/mpjGf2isbLuMZqM TRACTOR IGNITION KEY SWITCH WIRING | Universal Ignition Switch | JOHN DEERE 2130 kzbin.info/www/bejne/lXWXpWeerLydZqM

[@PistonShack]

Thanks for watching!

[@reloadnorth7722]

My buddy has a bad injector in a 1995 JD 240 skid steer. Same pencil injectors. This video makes all the difference to change them. Thankyou.

[@PistonShack]

That's so cool! I am glad this video helped you out. JD 240 has four cylinder engine, right?

[@reloadnorth7722]

@@PistonShack No. 3 cylinder, 2.9 litre engine, no turbo.

[@matthewgudger7122]

I just wanted to say thank you! I've got a 1972 410B and diagnosed the issue, but really needed your thourough video to help show me how to pull those injectors. Back to digging now.

[@jxp2212]

Big props for being so consistent with the videos coming out 👍

[@PistonShack]

Yeah, I do what I can)

[@jxp2212]

Great production and very informative uploads!

[@PistonShack]

Much appreciated!

[@PulsarTECH]

Thanks for your video! Very interesting tutorial!

[@PistonShack]

Glad you liked it!

[@plainnpretty]

Thanks for sharing this . I had one stuck in my 310 backhoe took me 2 weeks to get it out . I’d work on it a little then work on other things but I got it out using a homemade puller .

[@PistonShack]

Glad it helped, buddy! How's your repair? Any luck to get injectors out?

[@plainnpretty]

@@PistonShack yes I have new ones in now but one of the steel lines was leaking. I had to order a new one so I’m waiting on it .

[@sbmasson]

Thanks for the video.

[@PistonShack]

You are welcome Bruce! Thanks for watching)

[@tonypadgett6641]

Thank you for your help and expertise! Great video

[@PistonShack]

Glad it was helpful Tony! What kind John Deere machine do you have?

[@rustompilapil9839]

good day sir, what is the possible reason why no deseal appears in the injectors? Thank you

[@rustompilapil9839]

I am from the Philippines sir.

[@austinkrinke5308]

Very helpful. Thanks.

[@PistonShack]

Glad it was helpful, Austin!

[@sinenomine9093]

Thanks, in the process of replacing an injector on my JD 2755 farm tractor, very timely.

[@PistonShack]

Glad I could help! Let me know if you have any questions. Cheers Sine!

[@thomassolutions7888]

Thank you ,very good,,Very good video

[@PistonShack]

Glad you liked it Thomas! What kind JD machine do you have?

[@WarpedSpeed]

I have a John Deere 1120 tractor and it was virtually identical to replace the injectors (3 cyl 2.7 L) the High Pressure line was held on with the 3/4 female but also needed a 9/16 to hold male on injector end. The replacement injector did not have male on injector. The low pressure fuel return lines were just push on rubber fuel lines, and I needed a 5/8 wrench to tighten a male flare fitting.

[@PistonShack]

Hey Gerald. Thanks for sharing your repair experience!

[@maxmoo3275]

torque specs on hold down clamp bolts?

[@igostupidfast3]

mini slide hammers are great for stuck small things

[@PistonShack]

Good point! I should get one for myself! Can you recommend any specific model or brand.

[@igostupidfast3]

@@PistonShack i use harbor freight, (the 2 pound pittsburg model)

[@jimgomolka2132]

Thank you for your video! I just replaced mine and now there is a rapping sound and vibration coming from one cylinder. Sounds and feels like a hammer tapping the injector from the bottom... Any ideas what is causing that?

[@PistonShack]

Glad it helped Jim. Check if injector fires or not first. Also look for any injector damage or carbon/oil deposits. It could be dead valve lifter or valve lash out of specs.

[@carlosmoreira1788]

Great video! I do have a question on a jd200clc and it started leaking from the cap and even two of them became loose. From your experience what can be the cause? Threads are ok

[@PistonShack]

Hey Carlos! Those injector caps known to leak. I have seen people overnight cap then they start leaking. Check for any cracks or worn out o-rings. I would replace leaky once anyway. Thanks for your feedback.

[@blacktranch]

I have a leak coming out right under the return lines on top of injector 3 and 4, but my tractor still runs good. What do I need to replace?

[@mygarden365]

Thank You.

[@PistonShack]

You're welcome! Thanks for your feedback.

[@wallis066]

I it necessary to adjust these after they are installed

[@PistonShack]

There's no adjustment.

[@TheDkd6]

A framing hammer 🔨 works in seconds

[@PistonShack]

That's so cool! I will try it out next time!

[@jmrm3627]

Any one knows what is the psi setting on this injectors? I am trying to calibrate mine after I cleaned and unclogged them.

[@trail457]

I thinkthe dealers use a special slide hammer to get them out.

[@PistonShack]

Yeh, there's special tool.

[@edwinmadeley]

Where are the glow plugs??

[@stevebarz5125]

Use a slide hammer

[@thatsprivate6478]

My

[@wayneferagen2332]

Do you consult or help out FaceTime I have a John Deere 243 cylinder diesel which is not starting that I bought and there’s a little bit of blow wind coming from the top when I took the valve cover off but I don’t get any kind of attempt to start when I try. Anyway we can FaceTime on the phone and go over what I got I can pay for your time