Cylinder Head Installation

[@zeeshan_engineering_services]

Indeed special lubricant for cylinder head bolts is CAT / CTP 5P3931 Anti Sieze Compound / C5-A copper based lubricant blended by Loctite company 😊

[@val_p7027]

What a greatly explained video good job sir

[@bigred1247]

You forgot the front orings on dowel for oil to head

[@chick3nbig777]

What about the o-ring that goes under the plate? Does it take one on top of plate too?

[@CostexTractorParts]

Hello and thank you for contacting us! For us to better assist you, please send us a direct email to [e-mail] so that one of our representatives can contact you directly. Thank you!

[@gripgetter]

Did they ever get back to you about those O rings?? I’m doing a C-15 rt now and I would like to know that as well

[@sunilshinde8578]

@@gripgetter O-rings 5P-0840 should fit before and after spacer plate gasket

[@bigred1247]

Mine has 2 on a 1LW

[@bigred1247]

@@gripgetter on your plate front dowel look for the oring cut out in plate my 3406e took upper n lower

[@Rafael0Elles]

a query is the socket used for tightening the screws 19mm?

[@johngoldsmith6629]

Cat has a socket made for these 3/4 drive, 12 point.

[@dynamicmarinediesel3572]

Should head be retightened after 250 hours or not needed?

[@zeeshan_engineering_services]

Not needed in any engine technically😊

[@johngoldsmith6629]

Did not add sealant that was required in 2017 on spacer plate gasket.. Now if you have the newest head gasket don't need sealant.

[@salvor1]

Might help to say what engine in the title

[@modernknight6871]

The say the C15, it is a CAT

[@WilliamGemstone]

Might help if you watched the video

[@DieselSupport]

Cool

[@CostexTractorParts]

Thank you for your comment!

[@AkashAkashg]

Hi d9r cat dozer cylinders head information

[@CostexTractorParts]

Good afternoon,Thank you for contacting us. For any inquiries or questions, please contact us via email at:[e-mail]@costex.comThank you!

[@CostexTractorParts]

Hello! For any questions or inquiries that you may have, please send us a direct email to: [e-mail] Thanks!

[@jessicachihana7888]

15d

[@cbone5999]

I made the mistake of following this and had to do it over because they left the part about the two small o rings for the oil return. That sucked big time.

[@marceloevera2009]

looks like that chinese head from jereh ....reinforced ribs, more nickel content,thicker deck....comes with a promised to be the solution for cracked heads....

[@codyreeves1869]

I think you misspoke. You said 10 outside and 16 inside bolts but viewing the video a few times I'm counting 16 outside and 10 inside bolts. unless you count the 4 side bolts as inner bolts at which point it would be 14 inner and 12 outer. either way it sounds off

[@MohamedMostafa-us7pl]

For Sale 10 Cylinder Heads Caterpillar 3618 Marine Engine