Cougar Duoface Pro RGB Build - Step by Step Guide

[@shmulikanglister]

This video helped me a lot. A few comments: 1. A lot of things are optional like the EPS, radiator and all the water and light show.. 2. A lot of my power connectors and MB headers don't correspond to the ones in the video. What took about 10 minutes in the video, took me about three hours.

[@hasanuguz6868]

Realy clean, detailed and informative pc build guide Christopher. Thanks.

[@nicolasrolke3538]

Hey, can I just say thank you man for your channel. It is so helpful unlike most of gaming channels that are out there, yours is straight to the point, well produced and goes over everything. Thank you man. Keep going. 💯💯💯

[@ChristopherFlannigan]

Thanks, much appreciated

[@SoftCloud27]

Pretty relaxing video, was a really good watch!

[@markkeener569]

Your Prensention the best I've ever seen. I'm close to using the same case on a build, and after your Vid I think I will do just fine. Thank you Christopher.

[@victorvelesvillavideos]

I don't know if you have heard about the new PSU from Corsair, the shift series that have the cables to one side, the thing is that they say that the case must have a minimum width of 210 mm, I know that this model does comply, but in your experience you see that the back cover is very tight or glued to the source... because I think it should at least measure more than 5 cm, so that the cables can bend and go up or go to one side.

[@leonardocabrini3934]

This video was AWESOME! very detailed and organized

[@renebitorajac2094]

What a fantastic tutorial!

[@AlexYaroff]

Fantastic video, helped me a lot!

[@jared5583]

Hi! could you help me pls? I have everything connected as in the video but the leds of the fan just dont change.

[@فلوقتقنية]

Thank you, I benefited from your explanation

[@exceededrust9884]

When I click that button it just restarts my pc. Anyone know the answer to this?

[@codgod3021]

Hey, Can you please tell me where the reset cable that connects to the rgb controller connects on the other end? Mine cam not connected and don't know where to put it

[@vrekman256]

perfect as always

[@Viktor_Key]

Cable management is brilliant 🤣🤣

[@davidpatrick8153]

I noticed other people with the similar problem, but I connected my CPU cooler RGB to the Cougar RGB panel and synced it all to my motherboard. However the CPU fan light acts all wonky and does whatever it wants. Just curious if anyone found a fix, thanks

[@kalitkas]

For me work fine, msi center.

[@GuillermoMartinezVasquez]

hello. An orange USB 3.0 port doesn't work for me. Do the two front orange ones work for you?

[@EuripidisZ]

Great review. Have you found how to sync RGB lights with motherboard? In manual it says that you have to press the RGB button for 3 seconds and then it syncs but it doesn't work for me

[@georgejimenez9197]

Hola amigo, me pasa exactamente lo MISMO. Lograste solucionarlo mi motherboard es una MSI software msi mystic light

[@kalitkas]

For rgb need connect to motherboard ARGB. Try press ~5s and you see white color, it's mode for motherboard. Use msi center.

[@kalitkas]

​@@georgejimenez9197read

[@affita5723]

@@kalitkasthanks bro

[@redwolf48845]

I'm wondering when you'll upgrade the SSD to M.2 5.0? Most of the motherboards you show support M.2 5.0 drives.

[@ChristopherFlannigan]

One on the way from Crucial, so hopefully covering it on the channel soon

[@simoeqr1113]

can 750w psu handle these specs r9 7900x rtx 4080, no overclocking.

[@ChristopherFlannigan]

Just about, but would recommend at least 850w

[@АлексейЛевинтов-к6и]

Hello Christopher! I notice, that motherboard need 10 stand-offs, but in video i see that's being installed only 9. Is this normal for this motherboard?

[@ytice695]

How can you control the rgb on the fans with Msi mystic light does it need to be in a certain mode on the case

[@kalitkas]

Connect argb on motherboard, press reset for ~5s and wait white color, now u can connect in msi center

[@jimjimakos897]

thx for this

[@keczupowyzdzisiek7417]

Hello, which case wil be a better choice. Cougar Duoface PRO or Lian Li LANCOOL II Mesh C. Thanks in advance

[@АндрейИльин-д6ж]

мне понравился cougar mx600

[@henrylober1373]

Did the motherboard mounting screws come in the box?

[@t.buitano5093]

Yes

[@ytice695]

How can you control duoface rgb case arg

[@kalitkas]

What

[@MARCO-vj9oy]

duvida cruel, entre esse e o Lian LANCOOL 216

[@alejandroit2974]

why u removed reset of hub? and connect to mother

[@talkingcom]

❤❤❤

[@vrekman256]

+1