Having the press and roller tool-machines is a must. Lot of us don't have this so its Anvil time 'Al a Carte"
@perrywe1 Жыл бұрын
Fantastic metal work Paradise!! Good as new. Looks too good to be covered up by dash panel. lol
@infamousflav2 жыл бұрын
Nicely done! Thanks for putting in the effort for the video-- it looks like a lot of work. Keep up the good works. it looks like you got a few rusty Camaro owners you're inspiring (me included)!
@ParadiseBayCustoms2 жыл бұрын
Thanks for saying… Much appreciated! I’m enjoying it. Where are you at on yours?
@infamousflav2 жыл бұрын
@@ParadiseBayCustoms Mine are deep in the blues of the twos... Two 67's in about 2222 pieces for the past 22 years, two wives, two kids, too little time-- life.
@ParadiseBayCustoms2 жыл бұрын
@@infamousflav I can relate 2! 🤪
@charlieseidelmann67022 жыл бұрын
Great video! Attention to detail and fine workmanship. You are a craftsman.
@ParadiseBayCustoms2 жыл бұрын
Thanks Charlie. Kind of you to say. I’m really enjoying the process - happy to share what I can. 🍻
@DansGarageNC2 жыл бұрын
Looks like it is in better condition than mine, lol. Look forward to more.
@ParadiseBayCustoms2 жыл бұрын
Thanks 👍 Gonna check your channel out too.
@janicedeeter5772 жыл бұрын
My most favorite car...had one a long time ago. I had to sell so I could bury my Father. One day; I'll have one again. Many thanks for your work.
@ParadiseBayCustoms2 жыл бұрын
@@janicedeeter577 Karma is a wonderful thing… Given the sacrifice for your father… Trusting your good deed will be rewarded and another First Gen will be in your future! Thanks for watching, commenting and following along!
@janicedeeter5772 жыл бұрын
@@ParadiseBayCustoms Many thanks for your kind reply.
@berniegarrett4243 Жыл бұрын
I’m in the process of building a 68 RS/SS Camaro Pro Street And I’m loving your channel. Keep the great work up boys
@ParadiseBayCustoms Жыл бұрын
Thanks Bernie! I appreciate the support and kind words. Good luck on your 68. Where are you at on yours?
@berniegarrett4243 Жыл бұрын
Hey brother I’ve got the mini tubs in the fitted the floor, all the quarters, the roof. However, I just watched your video on modifications to fit Tremce transmission and we will be doing that. Check out “Trunk Monkey Rod Shop” on KZbin. Thanks again for all the great work. 🍻
@ParadiseBayCustoms Жыл бұрын
@@berniegarrett4243 Will do.
@williamaguiar142 жыл бұрын
Amazing work
@ParadiseBayCustoms2 жыл бұрын
Thanks for saying and watching. 👍
@ogbean862 жыл бұрын
Good work man. Glad to see the progress.
@ParadiseBayCustoms2 жыл бұрын
Thanks. Much appreciated! More coming soon. 👍
@GoGoGarage2 жыл бұрын
Nice Metal work and looks like lots of welding work. I also love to use Steel-IT.
@ParadiseBayCustoms2 жыл бұрын
Thanks 👍
@grey1wa Жыл бұрын
I've got a 2nd gen that's about to get started so I'm looking at all the rust repair info I can so I have some tools to work this in a sensible manner
@ParadiseBayCustoms Жыл бұрын
Awesome. Good luck with your build. I’ll keep sharing my experience/insight - hope it will help.
@grey1wa Жыл бұрын
@@ParadiseBayCustoms so far as i need to do a floor pan replacement on mine too
@elsdp-45602 жыл бұрын
Thank you for sharing. What a great repair👍👀
@ParadiseBayCustoms2 жыл бұрын
Bing watching! Awesome. Much appreciated. 😁
@HeckYeahBen8 ай бұрын
Do you use seam seal after?
@ParadiseBayCustoms8 ай бұрын
I will… After I epoxy paint everything. Thanks for watching and commenting. 👍
@trashpandaautomotive2 жыл бұрын
💪
@ParadiseBayCustoms2 жыл бұрын
Thanks!
@TheLooper02 жыл бұрын
Good work! My lower cowl was too far gone , I’m waiting for the new one to arrive. You mentioned Princess Auto, where are you in Canada?
@ParadiseBayCustoms2 жыл бұрын
Thanks! I’m in Winnipeg. You?
@TheLooper02 жыл бұрын
@@ParadiseBayCustoms Windsor On.
@ParadiseBayCustoms2 жыл бұрын
Where are you at on your build? Plans?
@TheLooper02 жыл бұрын
@@ParadiseBayCustoms Hi , I finished new floors, mini tubs, subframe connectors, removed both quarters and sandblasted the inner body framing. I’m prepping for epoxy priming that area now, while waiting for the lower cowl and still waiting on the drivers side quarter from the Camaro depot. I ordered the Detroit Speed quadralink as well so that I can install that box for the coil overs in the back. I’m still debating on the front subframe from Detroit Speed, I saw that you sure going that root. Very expensive, but why cut corners after going this far?
@ParadiseBayCustoms2 жыл бұрын
@@TheLooper0 My thinking exactly! Sounds like we are on parallel paths with you out in front! Do you post/share your progress anywhere? Would love to follow along? Instagram? Facebook? I put daily updates when I’m working on the car to Instagram… This kinda stuff keeps me motivated! 😂🤪😂
@charlespalmaccio7640 Жыл бұрын
Can you replace the lower cowl without removing the windshield?
@ParadiseBayCustoms Жыл бұрын
No. It forms the base for the windshield. Upper cowl is simply another layer on top of lower - both forming the base of the windshield.
@rezashakouri49702 жыл бұрын
There is no way to stop further rust underneath of layer by layer sheet metals. Hate Full. Rust starts right after welding
@scratchawaytechnology14882 жыл бұрын
That's why I love the panel adhesive ..it treats the metal and bonds it so well ..no more rust !!