HOW TO INSTALL MSD BOX WITH HOLLEY TERMINATOR X ON A '79-'93 FOXBODY MUSTANG

[@wadestewart901]

Great Video! I hope MSD is sponsoring this Video!

[@RegularGuyGarage]

I sent it to them on Instagram. Not sure they’ll see it. If they do hopefully they hook me up in the future lol

[@oscarvillarreal8951]

This is probably the best explain how to MSD box video so far.

[@DiNome1978]

great video, simplified and to the point thanks 🙏🏼

[@strangedemon]

Excellent video. Very important for boosted fox bodies and simple with terminator x using that adapter kit. Well done Dan

[@RegularGuyGarage]

Thanks Donny B 👍👍 I’ve learned a ton from your vids over the years

[@frank3stangs]

Donny b! Got my turbo installed watching your videos! Thanks!

[@danconlan8735]

Glad to hear that it works well Dan! You are one smart dude with all that electrical nightmare type stuff. Thanks for sharing, DC

[@RegularGuyGarage]

Thanks DC! I spend a lot of time reading before I tackle these things

[@79beans347]

I did everything exactly how you said to do it down to a tee , I mean followed every single word so i was all excited to fire my care back up and it wouldn't start and i spent a week trying to figure it out and rewatched the video to make sure I did everything that you told me to do come to find out you never said hook the battery back up and I had to pay the Ford service department $800 to diagnose the problem, 😂🤣😂😜 I had to mess with ya and I had to watch it twice to make sure that you didn't say it so i could poke some fun but you couldn't have covered it any better than the instructions , good instructional video it was most definitely different from the rest and straight to the point and made it look easy which it is but will help someone one day with a install for sure

[@RegularGuyGarage]

😂🤣 dang you got me 😂😂😂😂 also you work pretty quick to have done all that in 30 minutes after i posted the video 🌝

[@RegularGuyGarage]

And yea. That’s why I wanted to just get this out there. No fluff. Straight to the point and it’ll be there for when people need it. Next video is back at the race track 😎

[@79beans347]

😂🤣 yeah when I see one of your videos pop up i drop everything and watch because lets face it there's not many good channels out there so when I see one I watch it immediately 😂 I was planning on that little joke through the whole video once I figured out what kinda video it was 😂🤣😂 yeah I can't wait to see what it does at the track, does this upgrade help you out at the track??

[@RegularGuyGarage]

I have a good sense of humor so I appreciate the jokes lol. And let’s just say I have a hunch that it’ll help at the track…just a hunch though 👀

[@79beans347]

@@RegularGuyGarage yeah I always enjoy a good laugh and a good joke especially when the party in question actually gets it , There's been a select few that didn't get the joke and thought that I was serious even though I usually make the jokes so farfetched that there's no other way that you could take it, so when that happens I break out the crayons and coloring book and attempt to break it down for them 😂🤣 Oh ok I wasn't sure if u have taken it to the track yet or not but yeah I feel like it is going to help out alot especially the 2 step, this whole time I thought that you had a msd ignition just without the rev limiter and 2step like a ready to run distributor and coil with the cdi box but I with you I feel like your 60ft will get better along with the ET because now you can launch like tussin at 6200 rpm 😜🚗💨💨

[@Quik5oh]

Great video! Your editing and step by step narration is spot on.

[@GearHead704]

Cool stuff. My Dad's 69 F100 has an old school MSD Ignition on it.

[@emmanuelreyes4221]

Awesome information

[@RegularGuyGarage]

🤘🤘

[@boostjunkieMike]

❤️👌🏾😎 thanks for sharing. I miss this build.

[@fullauto8176]

I appreciate your Reg Guy videos -in this video you correctly showed the white wire from the TFI harness correctly going to the neg side of the factory coil plug my question is did you connect the positive side of the plug (green/red) using a 12v relay as described in the instructions? ..getting ready to finalize my connections thanks

[@ma7673]

Great video!

[@bonezshakergarage]

Great video.

[@RegularGuyGarage]

Thanks 🤘

[@bigd9848]

Great content ✊

[@RegularGuyGarage]

Thanks brother ✊

[@frank3stangs]

Nice video!!!

[@dewaynemitchell3931]

Hello got a question im going to relocatemy battery in my trunk i heard that if you extend any of the wires on the box you have to go a gauge size up is the true and do the ground have to go on the neg battery post or just any good metal part of the car thanks

[@mikevaughn7743]

Very Clearly shot and well explained video. I assume it would be the same with my Terminator X and MSD Digital 6 plus?

[@lochnessfox3441]

I guess my question is why not a dual sync distributor?

[@RegularGuyGarage]

I Just wanted to get this one 🤷‍♂️

[@lochnessfox3441]

@@RegularGuyGarage ok. I’ve not seen this one done yet. Curious to watch. My terminator should be here mid June sometime. Im absorbing all I can get. Why the msd System ? And did it run better? Thanks buddy?

[@lochnessfox3441]

@@RegularGuyGarage thank you for your time buddy. Have a good one!

[@RegularGuyGarage]

It runs much much better. Starts smoother. The holley had a 2 step also, but I had a hard time getting it to work on the stock ignition system. Just wanted to showcase the one on the MSD for now

[@lochnessfox3441]

@@RegularGuyGarage I’ve got ya and thanks for showing that to the rest of us!!!!!

[@NoFox_Given]

Cool video, surprised you didn’t go with the dual sync that seems to be the go to upgrade with terminator X. By doing this do you save any In’s and Out’s with the terminator X or are you using one now by going this route?

[@RegularGuyGarage]

I don’t have to use any Inputs or outputs to run this as is. And now that I have a more capable ignition system the terminator x 2 step should work, so I’ll switch to that when I install my transbrake/bump box and run them all together

[@ryanabitter]

Hi! Just bought the terminator x max kit. Question! Can the terminator Max do the two-step and can I bypass the MSD two step if I do so?

[@RegularGuyGarage]

Yes. You just don’t hook up the wire for the 2 step on the MSD. I just better luck with the MSD 2 step

[@ryanabitter]

@@RegularGuyGarage thank you!

[@NobleSpeedmotoworks]

So if you set the rev limiter the same on the msd and the terminator, which one is actually controlling the rev limiter? Is one preferred over the other?

[@turboman351w3]

Has that tfi ever give you problems with the Holley losing cam signal

[@RegularGuyGarage]

No I haven’t had that problem

[@turboman351w3]

@@RegularGuyGarage that’s good, yea watch out for it if does happen, I really like all the help you give people on getting them help with the Holley efi/ terminator x edvice

[@rhinevalleygarage]

IHO what would be the best route for a foxbody: LS , Coyote, Windsor, or 7.3 Godzilla?

[@RegularGuyGarage]

Cheapest route for most power would be LS. Godzilla would be really cool but I’ve seen guys blowing those up with power adders already. I’m a fan of Windsor’s and Coyotes but that’s more on the expensive side

[@rhinevalleygarage]

@@RegularGuyGarage I personally like the windor sound, everyone over 25 is like here comes a mustang.

[@motorbrains88chris]

What’s the benefit of running the mad box with Holley ?

[@RegularGuyGarage]

Much stronger sparked than the stock ignition system

[@RegularGuyGarage]

If you go back through my videos, I couldn’t get the 2 step in the terminator x to work at all on the stock ignition system and it would constantly have hard starting issues. As soon as I installed this system I haven’t had one hard start. To each their own 🤷‍♂️

[@Metlupass2]

What made you go with the Trickflow R intake vs anything else ? Thanks

[@sbfnation2535]

I just got my term x installed in my 347 I’m confused in the settings when your setting up your ignition parameters it ask if it’s tfi or cd box but if you click cd box it says it won’t control sequential injection or timing do you just keep it set to tfi or do you set it to the cd box setting any help would be greatly appreciated thanks

[@RegularGuyGarage]

Keep it set on TFI and the terminator x will control your ignition timing.

[@sbfnation2535]

@@RegularGuyGarage thanks your the best

[@lochnessfox3441]

It looks like it’s still a tfi distributor? Am I wrong dan?

[@RegularGuyGarage]

Yes it’s still a TFI distributor and plugs right in

[@Jkush463]

Im super confused theres no points wire on a MSD box, so are you actually saying the points wire from the TERMINATOR system needs to be hooked to that white wire from the MSD box as well? The way you said it in the video confused

[@bluecollarfox916]

My car had the harness cut out of it so it’s carbed. Is there an MSD set up I could use with it? Or could I still use this one?

[@RegularGuyGarage]

Yes there’s several applications to hook up an MSD box to . People use them with carb setups all the time.

[@bluecollarfox916]

@@RegularGuyGarage awesome thanks. I’d like to be able to control my timing more accurately than this stupid HEI Chevy style I have

[@supersportimpalass]

As far as I know you can’t run sequential injection with that distributor. The dual sync would have been a better choice imo

[@captchris7362]

Why not use the two step with the holley terminator x great video I bet it rips now

[@RegularGuyGarage]

I couldn’t get the holley 2 step to work on the stock ignition system. For this video I just wanted to show how to hook up the MSD 2 step. I’m going to try the holley 2 step now with the upgraded ignition system and most likely use that one

[@scottdeeter6164]

What throttle body are you running

[@RegularGuyGarage]

75mm

[@thehellfox3423]

Dude, that box will leave you stranded on the road. MSD is absolute fucking garbage, I had an MSD 6AL on my fox with the terminator x shit left me stranded in the middle of an intersection. Went with a cheaper more reliable Pertronix box and haven't had an issue since. MSD boxes were tough as nails back in the day but somewhere down the line their quality went to shit. Trust me, hook it up to where you can easily return it back to stock because when that bitch leaves you stranded you're gonna remember this comment.

[@RegularGuyGarage]

I don’t street drive the car, but all I have to do is unhook the adapter and plug the stock coil harness back in. so far it’s been working fantastic