Many thanks for sharing this. A very clear explanation, which helped me to sort out some misunderstandings that I had formed after reading several textbooks.
@QualityExcellenceHub3 жыл бұрын
You are welcome and Thanks for your appreciation. Happy Learning ahead.....
@mohseenshaikh84734 жыл бұрын
Best Ever Video for learning SPC. I like the graphical representation most. Thank You Sir.
@QualityExcellenceHub4 жыл бұрын
You are welcome. Happy Learning ahead.
@Nivethac-y2q Жыл бұрын
Very Well explained sir. Thank you.
@QualityExcellenceHub Жыл бұрын
Thank you. Happy Learning Ahead....
@Eve9853 жыл бұрын
Amazing explanation in this video. Thanks sir
@QualityExcellenceHub3 жыл бұрын
You are welcome. Happy Learning ahead.....
@pmppros3 жыл бұрын
It took me a second to get these concepts but they are the best ones in my opinion.
@QualityExcellenceHub3 жыл бұрын
Thanks
@flloydestrada91573 жыл бұрын
this is so good. thanks for this explanation
@QualityExcellenceHub3 жыл бұрын
You are welcome. Happy Learning ahead....
@manojsinhzala44223 жыл бұрын
Its really good video You have cleared my doubt in some cases Thanks
@QualityExcellenceHub3 жыл бұрын
You are welcome. Happy Learning ahead....
@arvindjha76074 жыл бұрын
This video is best and the good thing in this is that it expressed in a very systematic and in simple way that make it's feature more expressive. One more request to you sir if possible please do available some excel sheet for the general practice onintro section.
@QualityExcellenceHub2 жыл бұрын
Thanks. You are welcome. Happy Learning ahead....
@linga32403 жыл бұрын
Really its very important process step, finally got the well explained video. Thank you sir. And i wish to do more videos on Quality department topics with a clear and easy explaination 💐
@QualityExcellenceHub3 жыл бұрын
Thanks for your appreciation. Sure, I will post as said. Happy Learning ahead....
@syedshahbaj70705 жыл бұрын
Sir great way to teach us ...ultimate .....
@QualityExcellenceHub5 жыл бұрын
Thanks.... Happy Learning.
@philledwards774 жыл бұрын
This video is by far the best breakdown and explanation of Cp-Cpk I’ve ever seen and heard. Thank you for this awesome content!
@QualityExcellenceHub4 жыл бұрын
You are welcome and Thank you for your Appreciation. Happy Learning ahead.
@rocksong37722 жыл бұрын
Very very nice sir
@QualityExcellenceHub2 жыл бұрын
You are most welcome. Happy Learning ahead.....
@mahendhiran46813 жыл бұрын
Thk you so much sir👍👏
@QualityExcellenceHub3 жыл бұрын
You are welcome. Happy Learning ahead....
@SaiSneh5 жыл бұрын
Thank you for all your efforts to make this video for all. Appreciate it. Shared with my friends
@QualityExcellenceHub5 жыл бұрын
You are welcome. Happy Learning.
@Sahabuddin_Ali Жыл бұрын
Nicely explained
@QualityExcellenceHub Жыл бұрын
Thanks. Happy Learning Ahead....
@DeepakKumar-jk8gg5 жыл бұрын
Thanks for such informative vedio.....
@QualityExcellenceHub5 жыл бұрын
Your are welcome. Happy Learning.
@sharadgarg57644 жыл бұрын
Wow! What a explantion😀 thank you so much and also i want to be a same explanation about MSA
@QualityExcellenceHub4 жыл бұрын
You are welcome. Please check my video on MSA
@pavankulkarni72534 жыл бұрын
This Video is excellent, Understood much of the things. Just one thing I need to know, how do you plot the Graph manually ?
@QualityExcellenceHub4 жыл бұрын
It will plotted same as normal graph.
@basavarajamargol31833 жыл бұрын
Thank you sir
@QualityExcellenceHub3 жыл бұрын
You are welcome. Happy Learning ahead....
@mehulrathod1942 жыл бұрын
Excellent sir best video ..can we used same cp and cpk in real production
@QualityExcellenceHub2 жыл бұрын
Yes you can.. Happy Learning ahead....
@admorgan9674 жыл бұрын
Thank you for the video. I have a question, I am not sure why did you select d2 from five subgroups (2.326) rather than 25 (3.931) as shown in time 7:23 minutes. Thank you
@QualityExcellenceHub4 жыл бұрын
5 is subgroup size. 25 is number of subgroups. D2 taken is based on subgroup size. (i.e. number of reading in one subgroup = 5). Hope your doubt is cleared now. Happy Learning ahead.
@QualityExcellenceHub4 жыл бұрын
You dont have to calculate. It is a constant and is taken directly from Table given in SPC Manaul by AIAG. Hope it is clear now. Happy Learning ahead.
@balfasmustari2 жыл бұрын
Thank you very much for your sharing, very usefull explanation, appreciated so much
@QualityExcellenceHub2 жыл бұрын
Thank you for your appreciation. Happy Learning ahead....
@billchuah91024 жыл бұрын
hi sir, may i know how to get the constant(d2), i cant get the meaning. by the way, you teach is very clearly for us. thank you so much.
@QualityExcellenceHub4 жыл бұрын
Thank you for motivating me. d2 is a precalculated constant. It is mentioned in SPC AIAG Manual. Happy Learning.
@kajalchougule87233 жыл бұрын
Thnk u sir! Such a informative video. All things are well explained with graphically.
@QualityExcellenceHub3 жыл бұрын
You are welcome. Happy Learning ahead....
@МиленМилтанов2 жыл бұрын
Hello, how compute Cpk or Ppk indices, when our data is nominal, ordinal or dihotomous. Thanks in advance.
@QualityExcellenceHub2 жыл бұрын
Please elaborate your query. Happy Learning ahead....
@SARAVANAN-vd9vw4 жыл бұрын
thank you sir,, this is useful for me
@QualityExcellenceHub4 жыл бұрын
You are welcome. Happy Learning.
@sagarkor69729 ай бұрын
Very good video but I have 1 question please give ans. If we have Cpk then why we need to calculate the Cp.
@QualityExcellenceHub5 ай бұрын
Please go through video once again. You will get your reply. Happy Learning Ahead....
@chandrashekhardeshpande91832 жыл бұрын
Well explained, i have first time your video.thanks.
@QualityExcellenceHub2 жыл бұрын
You are welcome. Happy Learning ahead.....
@sharad10835 жыл бұрын
Sir, How are you choose the value of d2
@QualityExcellenceHub4 жыл бұрын
It is a constant value mentioned in AIAG Manual.
@dalwindersingh66554 жыл бұрын
@@QualityExcellenceHub AIAG manual Means?
@QualityExcellenceHub4 жыл бұрын
@@dalwindersingh6655 Automotive Industry Action Group. Manuals of core Tools are released by AIAG.
@mahendranlegend33173 жыл бұрын
Sir u explained about shift of curve on LSL what about USL
@QualityExcellenceHub3 жыл бұрын
Please let me know the time stamp so that I will be able to understand your query. Happy Learning ahead....
@sagarbhosale1174 жыл бұрын
Not understood to how to calculate constant (d2)=2.326 ???
@QualityExcellenceHub4 жыл бұрын
d2 is a constant based on Subgroup size and can be directly opted from SPC AIAG Manual. No need to calculate. Happy Learning ahead....
@daokunlim28524 жыл бұрын
Hi, your video is great. Do you have any video for the explanation of Pp and Ppk?
@QualityExcellenceHub4 жыл бұрын
Yes. Please check the videos on my channel. Happy Learning ahead.
@a.h.m.shakilaktar67814 жыл бұрын
Very good to understand. Thanks a lot
@QualityExcellenceHub4 жыл бұрын
You are welcome. Happy Learning ahead.
@motapartikrishna99635 жыл бұрын
Thank you for sharing this!
@QualityExcellenceHub5 жыл бұрын
You are welcome. Happy Learning....
@Ara-x3q Жыл бұрын
Thank you, Thank you for this awesome content! :)
@QualityExcellenceHub7 ай бұрын
You are welcome. Happy Learning ahead....
@suyogisudhe70204 жыл бұрын
use usefull well explained video...thank u so much
@QualityExcellenceHub4 жыл бұрын
You are welcome. Happy Learning ahead.
@mohdaniq46844 жыл бұрын
Terbaik laa uncle
@srinivasaathreyaudayagiri42562 жыл бұрын
Hi ... I have a doubt at 7:39 ... d2 value is 2.326 ... How we got this??
@QualityExcellenceHub2 жыл бұрын
It is a Constant and mentioned in SPC manual. Happy Learning ahead....
@pravinsonawne34113 жыл бұрын
Very useful, and complete presentation
@QualityExcellenceHub3 жыл бұрын
Thanks. Happy Learning ahead....
@swaminathanp.58254 жыл бұрын
Very good Video - The CP & CPK are explained step by step in simple to understand way . Thankyou for Uploading .
@QualityExcellenceHub4 жыл бұрын
Thank you for your appreciation. Happy Learning ahead....
@sukengshah224 жыл бұрын
Thank you Parsartha Virda, this was the most well explained version of the process capability study that i have come across on the internet.
@QualityExcellenceHub4 жыл бұрын
Thank you for you appreciation. Happy Learning ahead.
@user-bk8db7ud6k3 жыл бұрын
Excellent video. Thank you.
@QualityExcellenceHub3 жыл бұрын
You are welcome. Happy Learning ahead....
@L-A16404 жыл бұрын
would you kindly apply CP and CPk to a call center example?
@QualityExcellenceHub4 жыл бұрын
Sure, I will try to do the same.
@veeramani18165 жыл бұрын
Clear explanation sir, thanks
@QualityExcellenceHub5 жыл бұрын
You are welcome. Happy Learning.
@veeramani18165 жыл бұрын
@@QualityExcellenceHub sir I want to learn different methods of alignment in cmm inspection. Is any video available reg this
@QualityExcellenceHub5 жыл бұрын
@@veeramani1816 it is a specific information. It depends on which CMM and software you are using.
@veeramani18165 жыл бұрын
@@QualityExcellenceHub ok sir, I want to know about 321 alignment and best fit alignment, we are using lk evolution make cmm and software is camio or explain in pcdmis software
@ravikumars72552 жыл бұрын
thank you sir for this clear explanation 👍
@QualityExcellenceHub2 жыл бұрын
You are welcome. Happy Learning ahead....
@vikassingh-qi4ot4 жыл бұрын
Very good way to explanation .Thank you
@QualityExcellenceHub4 жыл бұрын
You are welcome. Happy Learning ahead...
@Sachin.bhadankar972 жыл бұрын
Big thanks for such a good knowledge
@QualityExcellenceHub2 жыл бұрын
You are welcome. Happy Learning ahead.....
@kishanpanchal48433 жыл бұрын
Sir what is difference between population (overall) standard deviation and sample (sample) standard deviation please tell me...
@QualityExcellenceHub3 жыл бұрын
Overall SD covers overall population and sampke SD is the SD of only the samples which are under study. Hope this clarifies your doubt. Happy Learning ahead.
@kishanpanchal48433 жыл бұрын
But sir in minitab I can get correct answer of sample SD by using manual formula but for overall SD I can't get correct answer by using manual formula for overall SD
@tanmaythorat66733 жыл бұрын
Learned so much from this video, You have explained very well, Thank you
@QualityExcellenceHub3 жыл бұрын
You are welcome. Happy Learning ahead...
@anandm164 жыл бұрын
Hi sir, when process mean lying on the target line, what will be the value of Cpk = ?? & what will be the sigma level ??
@prasantht25935 ай бұрын
Average of range how to find not understand
@QualityExcellenceHub5 ай бұрын
Take the average of ranges of all subgroups
@gauravsakharkar32225 жыл бұрын
Thanks for the video sir, Please can we have the same for MSA in detail
@QualityExcellenceHub4 жыл бұрын
Sure. I will. Please give me some time. Happy Learning Ahead.
@cincin0013 жыл бұрын
Can I ask why in the last slide, the bottom process doesn’t have a Cp of 3? The whole process variation fits into the limits 3 times.
@armandmatossian20814 жыл бұрын
So this is for a 3sigma process? Not 6 sigma?
@QualityExcellenceHub4 жыл бұрын
Value of xbar and r chart will be in terms of cp and cpk. Relation of cpk vs sixsigma value is as mentioned below Cpk =2 = 6sigma Cpk=1.67 = 5sigma Cpk=1.33 = 4 sigma Cpk=1 = 3 sigma. Hope this helps. Happy Learning ahead.
@ivlothanna9374 жыл бұрын
Sir don't mistake me you make Process capability with Xbar R chart data so what is the relation between SPC and Process capability both are same or different
@QualityExcellenceHub4 жыл бұрын
Staristical Process Control is a vide subject and calculating process capability is on topic of SPC. Creating Xbar R chart is just a visual representation of the process output. Hope your doubt is clear now. Happy Learning ahead....
@ivlothanna9374 жыл бұрын
@@QualityExcellenceHub thanks sir
@عبداللهالمشرقي-ن8ب4 жыл бұрын
in case , you have controlled process and available X chart and R chart , what are the values of X bare , sigma ,
@QualityExcellenceHub4 жыл бұрын
Value of xbar and r chart will be in terms of cp and cpk. Relation of cpk vs sixsigma value is as mentioned below Cpk =2 = 6sigma Cpk=1.67 = 5sigma Cpk=1.33 = 4 sigma Cpk=1 = 3 sigma. Hope this helps. Happy Learning ahead.
@عبداللهالمشرقي-ن8ب4 жыл бұрын
@@QualityExcellenceHub think you for your quick reply , how to calculate cp and cpk from available in formation from X chart and R chart
@sudipbanik3169 Жыл бұрын
Sir I want to do internal auditor training
@QualityExcellenceHub7 ай бұрын
You can. Please go ahead.... Choose good agency....
@rintupaul14133 жыл бұрын
Excellent video for cp & cpk
@QualityExcellenceHub3 жыл бұрын
Thanks. Happy Learning ahead....
@Vision2674 жыл бұрын
Can we have only one subgroup
@QualityExcellenceHub4 жыл бұрын
No.
@ManiK-tp8yp3 жыл бұрын
தெளிவான விளக்கம்👌 Very clear explanation👌 நன்றாக புரிந்தது👍 Well understood👍 உங்களுடைய கற்பிக்கும் விதம் மிக நன்று👏 Way of teaching is very nice 👏 மிக்க நன்றி🙏 Thank you very much 🙏
@QualityExcellenceHub3 жыл бұрын
Thanks. Happy Learning ahead....
@ganeshbachhav9599 ай бұрын
Best explanation .Thanks
@QualityExcellenceHub7 ай бұрын
You are welcome. Happy Learning ahead....
@nagendrarana70693 жыл бұрын
This is an excellent video Sir
@QualityExcellenceHub3 жыл бұрын
Thanks. Happy Learning ahead...
@018-gokulsundar92 жыл бұрын
Thanks sir.. Learned a lot...
@QualityExcellenceHub2 жыл бұрын
You are welcome. Happy Learning ahead....
@muthukumara2274 жыл бұрын
Super sir... Thank u so much
@QualityExcellenceHub4 жыл бұрын
You are welcome. Happy Learning ahead.
@nuzhatjabeen14233 жыл бұрын
Very well narrated. Thanks
@QualityExcellenceHub2 жыл бұрын
You are welcome. Happy Learning ahead....
@manindersingh4175 жыл бұрын
Also define what is standard deviation on graph,
@QualityExcellenceHub5 жыл бұрын
Sure. I will consider this input during excel video. Happy Learning.
@manindersingh4175 жыл бұрын
@@QualityExcellenceHub thanks sir and also make videos on np chart, u chart.
@QualityExcellenceHub5 жыл бұрын
Sure. Please give me some time
@sandeepchoyal39103 жыл бұрын
Very informative session 👌
@QualityExcellenceHub3 жыл бұрын
Thanks. Happy Learning ahead....
@vigneshv84454 жыл бұрын
Excellent video sir!! Thanks a lot.... can u do video on CMK like this it will be very much helpfull for people like me!! Please do it!!
@QualityExcellenceHub4 жыл бұрын
Can you please elaborate what is full form of CMK?
@vigneshv84454 жыл бұрын
@@QualityExcellenceHub Machine capability index (CMK)..SIMILAR TO CPK.
@QualityExcellenceHub4 жыл бұрын
Ok, I will. Please give me some time... Happy Learning ahead....
@vigneshv84454 жыл бұрын
@@QualityExcellenceHub thanks a lot..will be eagerly waiting..
@bharatmehta41664 жыл бұрын
Sir i wants to know how you take d2
@QualityExcellenceHub4 жыл бұрын
d2 is a constant based on Subgroup size and can be directly opted from SPC AIAG Manual. No need to calculate. Happy Learning ahead....
@mallikarjundn4228 Жыл бұрын
Thanks sir, I learned more knowledge and ideas about quality core tools through your channel. And your video gave me more confidence to change my work. my confidence has boost to discuss with our colleagues along with the presentation.
@QualityExcellenceHub7 ай бұрын
You are welcome. Happy Learning ahead....
@youngandwild19694 жыл бұрын
You have saved me with this video and many of your others, so glad I found this channel.
@QualityExcellenceHub4 жыл бұрын
Thanks. Happy Learning ahead....
@terangbenderang63084 жыл бұрын
Thank you for your explanation. I had learned 3 times from 3 different persons, I learned the formula for cp & cpk. I see your video, I learn the Concept. You are a good teacher.. thanks..
@QualityExcellenceHub4 жыл бұрын
You are always welcome. Happy Learning Ahead.....
@stegokiller88143 жыл бұрын
ima copy this and use it for school lol ty
@QualityExcellenceHub3 жыл бұрын
You can show this video.
@m.ajmalmahaboobjan42864 жыл бұрын
Really appreciate, thanks for your good level of teaching about the SPC concept
@QualityExcellenceHub4 жыл бұрын
You are welcome. Happy Learning.
@Coolman9762 Жыл бұрын
Very informative video👌
@QualityExcellenceHub Жыл бұрын
Thank you. Happy Learning Ahead....
@mohamadrazakabdulkarim6924 жыл бұрын
Thanks boss. You are the best!
@QualityExcellenceHub4 жыл бұрын
You are welcome. Happy Learning ahead....
@terangbenderang63084 жыл бұрын
1 more question : How if there is only one limit specification? For example only have LSL, dont have USL. (Viceversa) How to calculate cp & cpk?
@QualityExcellenceHub4 жыл бұрын
Consider only one Cpk Upper or Lower whichever is applicable. OR Ask customer and decide with his agreement. Hope you understood. Happy Learning ahead...
@Lishicreations2 ай бұрын
Dear..sir...where I can get d2 value if n is more than 30
@sureshraj9977 Жыл бұрын
Hello sir, Really simple to understand and a very clear explanation. Thank you so much for making this video. Will be great if you make a video on d2 calicualtion. How to derive it. Can we calicate d2 as standard deviation.
@QualityExcellenceHub Жыл бұрын
Thanks for your appreciation. Sure, I will. Happy Learning ahead....
@amoghrajn62534 жыл бұрын
Excellent Video on Cp and Cpk, gained knowledge about their difference and use of it. thank you for your Video Requesting you to upload more such videos about quality and their tools.
@QualityExcellenceHub4 жыл бұрын
Thank you for your appreciation. I will be continuing it. Happy Learning ahead....
@bonsai74384 жыл бұрын
Hallo Parthasarthi Virta, I want to say thank you for your valuable explanation. Is well structured and clear explained. I just subscribed your Channel :-) Please continue with this style and choice Lean Six Sigma belt topics further. Rgds
@QualityExcellenceHub4 жыл бұрын
Thank you for your motivation. I will continue the same. Happy Learning ahead....
@madhavshenoy7711 Жыл бұрын
Very nice explanation
@QualityExcellenceHub Жыл бұрын
Thanks Happy Learning Ahead.....
@raghavendrapalekar673911 ай бұрын
Can you please make video one full DfSs of manufacturing using CP cpk
@basuman716 күн бұрын
excellent sir. Please post new video is very helpful to me and many.
@yogendrasinhparmar86263 ай бұрын
For cpk , standard deviation should be S not sigma 😅😅
@littotom76664 жыл бұрын
please do a video on FMEA
@QualityExcellenceHub4 жыл бұрын
Videos are already there on FMEA. Please check below Playlist for FMEA videos. FMEA: kzbin.info/aero/PLUdaUZpIxC7FD2yxB1TO8cqpSXOvljAYr
@areejalattar7134 жыл бұрын
Thanks you are the best
@QualityExcellenceHub4 жыл бұрын
You are welcome. Happy Learning ahead.
@paramasivamboominathan63744 жыл бұрын
Sir, how many readings are required for a particular specification say example the diameter after particular operation is 35+/- 0.02 how many min job or part readings are required to calculate cp& cpk through std deviation
@QualityExcellenceHub4 жыл бұрын
Ideally, 25 sub groups of 5 each in one group. Total 125 readings for ploting the chart.
@gauravgouda85914 жыл бұрын
Excellent video sir
@QualityExcellenceHub4 жыл бұрын
Thanks. Happy Learning Ahead.
@swapnilkawade32184 жыл бұрын
Best and well clear crisp explanation.
@QualityExcellenceHub4 жыл бұрын
Thanks. Happy Learning ahead.
@swapnilkawade32184 жыл бұрын
@@QualityExcellenceHub sure, liked your explanation..
@varshakuttarwade46873 жыл бұрын
Sir please can you reply for What is mean by Cp= 0?
@QualityExcellenceHub3 жыл бұрын
It does not exist in practical scenario because USL and LSL cannot be Same. There will be some Tolerance. It can tend to zero for worst process. But cannot be Zero. Happy Learning ahead....
@varshakuttarwade46873 жыл бұрын
@@QualityExcellenceHub Thank u so much
@QualityExcellenceHub3 жыл бұрын
You are welcome
@jaimelannister17974 жыл бұрын
Why do my teachers gotta assign such long videos
@1981hosni2 жыл бұрын
شكرا ، من مصر
@QualityExcellenceHub Жыл бұрын
You are welcome. Happy Learning ahead.....
@vigneshhari34563 жыл бұрын
Explain full design drawing and how to read. How to measure Gd&t symbol, tolerance
@QualityExcellenceHub3 жыл бұрын
Sure, I will. Please give me some time. Happy Learning ahead
@alokalliyanage702210 ай бұрын
This is the best explanation I have gone through so far on this topic. Thank you for your great explanation sir🙏
@QualityExcellenceHub10 ай бұрын
You are welcome. Happy Learning Ahead....
@abhishekghosh60584 жыл бұрын
23:12 when cpk=1 how will be the graphical representation. Means if the cpk value is 1 then there will be no non conforming. Proceed and customers voice are same???
@QualityExcellenceHub4 жыл бұрын
Yes. Check video ahead 23.35 onwards. Top figure of Cpk =1. It is self explanatory. Happy Learning ahead.
@kalaidinesh44553 жыл бұрын
Sir ,Could you post the video for Cpk calculation with unilateral tolerance? Because i want to know that,If i changed the tolerance from unilateral to bilateral,it will affect the CPk?
@QualityExcellenceHub3 жыл бұрын
Yes, there will be effect of change in tolerance from bilateral to unilateral. Happy Learning ahead....
@aswinkumar9392 Жыл бұрын
Super and fantastic clear explanation with simple English❤❤❤❤
@QualityExcellenceHub Жыл бұрын
Thank you @aswinkumar9392 Happy Learning ahead.....
@Engrmfaisal4 жыл бұрын
Too much Thanks sir Very helpful......sir the way you deliver is really outstanding
@QualityExcellenceHub4 жыл бұрын
Thanks for you motivation. Happy Learning.
@rajasekharyadala87503 жыл бұрын
Dear sir, Please check as per my understand CPK is 1.33
@nikeshdeshmukh80725 жыл бұрын
The explanation was amazing and appreciate your efforts behind this. Pls make a video on pp and ppk calculation as the calculation of mean differ in cpk and in ppk