Not only very talented in making jewelry but one of the best video presentations. No stupid looping music. No talking and just the right amount of humor! Your a master👍🏼👍🏼
@my-projects2 ай бұрын
Awesome feedback ☺ - you have taken the time to notice the details in the video - it is exactly this kind of feedback that makes me very humble, but also motivated to continue my work. Thank you very much.
@mikemaxwell259116 күн бұрын
A great looking piece you made thousands like. Bravo! Be well.
@my-projects16 күн бұрын
Thank you for your awesome feedback, Mike Maxwell ☺👍
@samoasisifi5 ай бұрын
The execution of your craft is nothing less than that of a master, craftsman, and artist. I've completed my 1st piece with aluminum wire capped with copper. When im ready ill break out my copper and brass. Cheers M8 and thank you.
@my-projects5 ай бұрын
@@samoasisifi I am very honored by your feedback 😊 - thank you very much for it. It's good to hear that you've made a good start with alu / copper - keep going, 👍 I'm sure you'll enjoy it as much as I do. Thanks again.😉
@janedoee85155 ай бұрын
I'm a metalsmith beginner and i'm speechless. I can watch it for hours😮 Exeptional skill! I'm in love😊
@my-projects5 ай бұрын
@@janedoee8515 Thank you very much for your very nice feedback - it humbles me 😊👍
@skuzzylady16 күн бұрын
Fabulous! - love the wee guy, hiding in the copper tube too! 😉
@my-projects15 күн бұрын
Thank you very much - and for noticing the details as well - I really appreciate that.☺😀👍
@catsmad4812 күн бұрын
I spotted that too.....had to go back again because I thought I imagined it.😂😂😂😂
@my-projects12 күн бұрын
@@catsmad48 Thanks a lot 😀❤👍
@catsmad4812 күн бұрын
Your videos are an absolute joy to watch. Not only stunning work but totally entertaining too. TV is dead to me now😂
@my-projects12 күн бұрын
Awesome to have you as a viewer of my videos! Your eye for details in the video is quite extraordinary - it gives me motivation to keep doing what I do 🥰 - thank you so much for this too. All the best to you.👍
@kiranpatil3262Ай бұрын
The best part in this video is there is not background music which I liked... Usually in every video on YT there we have background music which keeps us disturbing and we can't pay attention to the work... This video is amazing..❤ Keep up your good work 😊
@my-projectsАй бұрын
Thank you so much for your awesome and specific feedback, which I really appreciate. ❤You're right - music is often distracting and can make the experience of a good video bad - but rarely the other way around.👍
@shirleybishop48822 ай бұрын
Absolutely beautiful!! Love the way you use practical tools.
@my-projects2 ай бұрын
Thanks a lot for your eye for the details👍
@xvideodventurer48265 ай бұрын
My man U R not just making jewelry U R making art that people can wear. U deserve all the praise, respect, & love in the world. I'll be looking forward 2 more of your videos.😀🙂☺💗💗💗
@my-projects5 ай бұрын
Thx a lot - respect for taking the time to give me your very nice feedback. 😃☺👍
@pamelatillery2841Ай бұрын
Recently found you, binge watching all your creations, lovely to see the process and loving the humour. You make beautiful items. 🇬🇧👍🇬🇧
@my-projectsАй бұрын
Thank you very much - I really appreciate your awesome feedback☺👍
@terryg80125 күн бұрын
Gorgeous!
@my-projects24 күн бұрын
Nice - thanks a lot ☺👍
@SavageArt1110Ай бұрын
Amazing bracelet😍😍😍
@my-projectsАй бұрын
Great feedback! Thank you very much - I really appreciate it. The best to you ☺🥰👍
@4nbop80user3 ай бұрын
I love your work and congratulations too to the one who made the video ! Working with metal, especially copper, is so very satisfying. The light, color, sound, touch, smell…. Your video really brings it all across ! My workshop is not accessible right now but I really felt like heading for it ! Big up to both of you !
@my-projects3 ай бұрын
Thank you very much for your very nice feedback. It gives me a huge motivation to continue making jewelry and making videos about it. Yes, it is me who both does the work and films / edits it. I completely agree that working with copper is very satisfying - I will also continue with it. Many thanks again.
@4nbop80user3 ай бұрын
@@my-projects So you made the videos too ? Wonderful - you truly are multi faceted ! Kudos !
@my-projects3 ай бұрын
@@4nbop80user Thank you very much - I try to do the best I can.
@artist_11_1124 күн бұрын
Beautiful!
@my-projects24 күн бұрын
Thanks a lot! 😀👍
@joseluisgonzalez17682 ай бұрын
Aplausos sos un Maestro, un hermoso trabajo bien explicado y el video de la mejor calidad. Saludos desde Argentina.
@my-projects2 ай бұрын
Muchas gracias. Sus comentarios me reconfortan y me motivan para seguir trabajando. Muy buen día en Argentina.
@EdwardGrullon-b7k4 ай бұрын
Excellent job with the instructions and craftsmanship!
@my-projects4 ай бұрын
Thanks again EdwardGrullon 😊
@LESAM7578Ай бұрын
That’s amazing!
@my-projectsАй бұрын
Thanks a lot 😊👍
@alicerosa67664 ай бұрын
Beautiful bracelet, love it❤
@my-projects4 ай бұрын
Thanks a lot 😊🥰
@myrnaroman96113 ай бұрын
Una verdadera obra de arte, En tu mano se ve más linda aún ❤😊
@my-projects3 ай бұрын
Un comentario muy agradable: me reconforta el corazón.🥰❤
@Monstermagick11 күн бұрын
i facepalmed when i saw you use the hanger in the drill instead of just shoving the coppet straight into the chuck. lol thankyou
@my-projects10 күн бұрын
Thanks a lot - Yes - why not do things a little differently 😀👍
@MASI_forging5 ай бұрын
Incredible work as always 👍👍
@my-projects5 ай бұрын
@@MASI_forging Big Thanks 😊👍
@matthewcutler41813 ай бұрын
What a monster, good work 👏🏻👏🏻
@my-projects3 ай бұрын
Thanks 😊
@jimcharmer88683 ай бұрын
Really enjoyed that mate, I make bulky copper bracelets too, and it’s rare for me to find a video that I enjoy on the subject, keep it up, and we’ll done on not overcooking the brazing rods, nothing worse than silver joints ;-)
@my-projects3 ай бұрын
Thanks a lot my friend. Yes, there is something special about bulky bracelets, which I keep coming back to - good to know we have it in common.
@Ilikethebeginningofall4 ай бұрын
Amazing 👌
@my-projects4 ай бұрын
Thanks a lot 😀👍
@ВячеславМакаров-м4фАй бұрын
Это просто супер!!!! Шедевр. 👍🤝👏
@my-projectsАй бұрын
Большое спасибо за ваш очень приятный отзыв - мне это очень приятно. Очень хорошего дня тебе.☺👍👍
@ВячеславМакаров-м4фАй бұрын
@@my-projectsОчень хорошая пайка!!!! Если не секрет - какой припой используется, что бы не отличался по цвету от материала?
@my-projectsАй бұрын
@@ВячеславМакаров-м4ф Большое спасибо за ваш замечательный отзыв. Пайка вообще не секрет - я использую припой Rothenburger Copper 1 мм - НО использую совсем немного, иначе пайка не будет полностью медного цвета.
@ВячеславМакаров-м4фАй бұрын
@my-projects Спасибо 🙏💕 Удачи Вам и здоровья!!!!
@my-projects24 күн бұрын
@@ВячеславМакаров-м4ф Спасибо большое и кстати ☺👍
@utegorgens1407Ай бұрын
sieht super gut aus, aber wirklich sehr schwer. vielleicht probiere ich das mal mit dünnerem draht. habe sowas bislang mit nur 1mm-draht gemacht, dafür aber doppelt. mir gefällt sehr die präsentation des videos.
@my-projectsАй бұрын
Vielen Dank für Ihr tolles Feedback - ich weiß das wirklich zu schätzen. Ja, das Armband ist ziemlich schwer und stark - es wäre sicherlich gut, es auch aus einem dünneren Faden zu machen. Super schön, wenn du damit anfängst - und lass mich bitte wissen, wie es endet. Nochmals vielen Dank.☺👍
@utegorgens1407Ай бұрын
@@my-projects Hi, zuerst möchte ich ein anderes Armband machen, das ich in einem Deiner Videos gesehen habe.
@my-projectsАй бұрын
@@utegorgens1407 Vielen Dank - toll, dass du meine Videos für etwas nutzen kannst. Ich hoffe, es wird Ihnen gefallen.☺👍
@dante172405 ай бұрын
Encore une merveille !! ❤❤❤
@my-projects5 ай бұрын
@@dante17240 Merci beaucoup pour votre excellent retour 🥰👍
@Galen19964 ай бұрын
Speechless!!!
@my-projects4 ай бұрын
Thank you😊😉
@fcogarba74762 ай бұрын
Te ha quedado preciosa muy bonita 👏👍🇪🇸
@my-projects2 ай бұрын
Muchas gracias. Me alegra que pienses así.🥰👍
@stephanieinspired115113 күн бұрын
So beautiful. We would like to purchase bracelets from you, if you are willing. Looking now for your website…
@my-projects13 күн бұрын
Thank you so much for your fantastic comment again Stephanie ☺👍Unfortunately, I do not sell my works - they become gifts for my family and close friends. But thank you very much for your interest - and all the best to you. 🥰
@richardmiller86702 ай бұрын
I like a rawhide mallet for this purpose.
@my-projects2 ай бұрын
That sounds like a good idea 👍
@petersmedley4595 ай бұрын
From a fellow jeweller, who likes to specialise in heavy gauge statement pieces, that was superbly well done. I normally use Bronze or Silver on the basis that Copper is more likely to deform when worn but I am convinced that your piece will stand up beautifully. I’m curious-I normally use silver solder but I would love to know what solder it is that you used as it seems an excellent colour match for Copper. Once again, outstanding work and result. P.S. I use my Foredom for polishing and have a wooden holder that I treasure. It is two pieces of scrap wood, a base slightly thicker than the upright, which I clamp in place in a vice. The upright has a hole drilled through it, slightly bigger than my handpiece, with a narrow slit from the top of the hole to the top edge of the upright piece of wood. Just above the hole for the handpiece is a hole drilled through for a bolt which can be tightened to clamp the handpiece in place. It’s a simple design and something which you might find useful? I hope I’ve described it sufficiently for you to visualise! 🐺
@my-projects5 ай бұрын
Thank you very much, Peter - a very nice feedback, which I really appreciate. Yes, strong copper jewelery keeps its shape - you are absolutely right about that. Your description of your wooden holder is very nice - I can easily imagine it - I also think it would work for me. Thank you very much for the tip! I have actually bought some copper solder tin, (Rothenberger) which holds the color quite well - however, I have to be careful with soldering a little at a time - otherwise there may be a tendency for it to become too bright.
@deanmalpas7149Ай бұрын
excellent work. do you ever silver plate this Cu work
@my-projectsАй бұрын
Thanks a lot!. No - I usually don't, but your question makes me reconsider doing it at some point - Thanks.👍
@JustME-ft4di8 күн бұрын
It’s like a very big Etruscan box chain. Not sure that has the links soldered in crosses though? Cool! Been meaning to gave a go at making g a smaller one. Can I ask what solder you used on the copper? I can’t get copper solder to flow and silver always looks bad.
@my-projects7 күн бұрын
Thank you so much for your awesome feedback. ☺👍I use Rothenberger copper solder 1 and 2mm - it works for me, but don't use too much - because then you will have to grind too much on it to get the joints copper colored ☺again.
@mrtrillionfold13 күн бұрын
Awesome Bracelet!!! Got any for sale?
@my-projects13 күн бұрын
Thank you so much for your fantastic comment ☺👍Unfortunately, I do not sell my works - they become gifts for my family and close friends. But thank you very much for your great interest! 🥰👍
@mrtrillionfold12 күн бұрын
@ well, I appreciate you showing what it takes to make this bracelet and your other creations. They are Awesome! Thanks for sharing your skills and your knowledge. Happy New Year!
@my-projects12 күн бұрын
@@mrtrillionfold Thanks a lot👍
@my-projects12 күн бұрын
@@mrtrillionfold Thanks a lot again. Happy New Year to you and your loved ones!
@sarikayabora18 күн бұрын
10:55 There was a someone inside the copper pipe when it was cut
@my-projects17 күн бұрын
Yes - that is absolutely correct and thank you for noticing the detail. ☺👍
@Creativevillageidea-s3f3 ай бұрын
Mantap sobatku idea maha karyanya.. Anda pintar sekali dan hebat.. Sehat terus sobat dan jag kesehatan karna itu lebih utama. Salam oersahabatan dari saya. 🙏🙏🤝🤝🤝
@my-projects3 ай бұрын
Terima kasih banyak🙏🙏🙏
@Maggioretom3 ай бұрын
Hi! Really very nice work! can i ask you what the welding filler material is? Is it pure copper or something else? Thank you very much!🙏
@my-projects3 ай бұрын
Hi - Thanks a lot for your nice feedback :). I use Rothenberger copper solder and if I am careful with the soldering I can get a copper colored joint. If you put too much solder on, the copper-colored part will float out, and then you will have to grind away the silver-colored part.
@ValkoBranislav5 ай бұрын
Pekná práca...
@my-projects5 ай бұрын
Veľmi pekne ti za to ďakujem.
@silvermarc15 күн бұрын
Может был уже этот вопрос. Каким припоем для меди вы пользуетесь?
@my-projects15 күн бұрын
Для пайки я использую медный припой Rothenberger. ☺👍
@jsdover595 ай бұрын
Awesome bracelet, better than any I've ever seen for sale in a jewellery store. What was the diameter of the copper pipe you used to make the end caps?
@my-projects5 ай бұрын
@@jsdover59 Thanks a lot 😊👍 I used 15mm Copper pipe.
@zźx-o9yАй бұрын
great,
@my-projectsАй бұрын
Thanks, my friend.👍
@brendabaxter506017 күн бұрын
Why do you burn it and put it into the liquid to work with?
@my-projects16 күн бұрын
Thank you for your feedback.☺ I burn it to soften the metal after I work on it. I use liquid to cool it to be able to work on it quickly, and I use sulfuric acid liquid (14%) to remove residue after soldering.
@frenchphil1892 ай бұрын
Thank you for your reply. If I may, can you tell me please what kind of solder do you use. I am having trouble getting 'rings' to solder shut properly.
@my-projects2 ай бұрын
I use Rotenberger copper solder - 2mm - but be careful not to use too much, because then the copper color in the soldering is destroyed. Please let me know if you can get it working.
@kariesfighter4042Ай бұрын
Hallo, sehr schöne Arbeiten. wo bekomme ich die Schwefelsäure??
@my-projectsАй бұрын
Vielen Dank für Ihr wunderbares Feedback. 14 %ige Schwefelsäure kann man vielerorts im Internet kaufen. Einen schönen Tag noch.
@MrBerdun3 ай бұрын
Una pulsera preciosa. Tengo una pregunta: ¿esa herramienta para estirar el cobre la has hecho tu?. Si es así, ¿tienes algún video de como hacerla?. GRACIAS
@my-projects3 ай бұрын
Muchas gracias. Sí, yo mismo hice la herramienta, que es una tabla gruesa de madera. Hice 2 agujeros, uno de 2 mm y el otro 3 mm más pequeño que la circunferencia de la pulsera. Luego saqué la pulsera a través del tablero, pero requiere esfuerzo. Desgraciadamente no tengo más vídeos que en la película donde muestro cómo hago un agujero en el tablero. Gracias por tus excelentes comentarios.
@sergeykirichenko975314 күн бұрын
добрый день а что это за жидкость голубая куда вы погружаете метал после прогрева ?
@my-projects13 күн бұрын
Эй, это 14%-ная серная кислота, которая удаляет остатки припоя и другие загрязнения с меди.👍
@richardmiller86703 ай бұрын
Love watching your art. Are the loops supposed to be symmetrical, or is one side of the loop intentionally bigger than the other? Thank you!
@my-projects3 ай бұрын
Thank you very much for your great feedback. ☺ It is easier to get the thinner end of a loop through the other loops. And if the other end of the loop is more open, it's easier to get your awl through the first part of the loop. But it is intended that the 2 ends in the loops should be the same size when the loop is finished braiding. I hope I have understood you correctly and that my answer is understandable. 👍
@richardmiller86703 ай бұрын
@@my-projects yes! Perfect thank you. I will attempt making one via your exceptional tutorial.
@wunjodnbАй бұрын
For the soldering, are you using a butane torch or something a bit bigger? Great video. Thanks for sharing!
@my-projectsАй бұрын
Thanks for your feddback ☺👍I just use a regular butane torch, like this one: www.amazon.com/Iwatani-Professional-Adjustable-Anti-flare-Stabilizing/dp/B01HVZR3DI/ref=sr_1_23?crid=1LO749JKXR74W&dib=eyJ2IjoiMSJ9.KFdUozfPnqR0k-axGt_H-M03tKu4hocFcwh3M0054QZ7v4L8JBFybdPYqxC3DnhRmjQD99BNSUfo-rbs2CERBzFJO88Ij4glnKvJhGCfGAZZ69eJcGtUqGyHQlnS40faQB2yD7mmXcyXE8TLQR8aqEfar_31aFolIXOnd2Ocgojps_Hynh42KPwNm7-K11R0WEACUA7Yn0n9Hs7oKqqNoD_1tlWCguIhK-wBZTBue77tzONoA_V3tYT2sk5xOggJdOIpbg1Ucz3pmv33EzWSTE3PPimoADLCq_ylUbTpIvI.C70YSrDikIyjU8Xx8UCEP40P_xN48sLOotU_4EFuUKI&dib_tag=se&keywords=butane+torch&qid=1732125970&sprefix=butane+torch%2Caps%2C174&sr=8-23
@wunjodnbАй бұрын
@my-projects thank you! Looking forward to more videos!
@gilbertdavenport438911 күн бұрын
How much would that be for a 22" necklace?
@my-projects10 күн бұрын
Thanks a lot - but unfortunately I do not sell my works. They are given as gifts to family and friends. ☺👍
@frenchphil1892 ай бұрын
I like the fact that you use very few 'specialised' tools to create your items.
@my-projects2 ай бұрын
Thank you very much for noticing the details - yes it is often not necessary to use specialized tools :)
@HolisticSoundCenterАй бұрын
Could you tell me the reason behind why you heat the copper then put it in sulfuric acid? :)
@my-projectsАй бұрын
Thank you very much for your interest. Yes - I heat up the copper to soften it a little when I have to shape it later on and I use sulfuric acid to dissolve redundant solder residues, so that the bracelet will be nice after the grinding and polishing.
@Gem666a3 ай бұрын
Good good
@my-projects3 ай бұрын
Thanks 😊
@Gem666a3 ай бұрын
@@my-projects thanks you for you , j'adore vos techniques différentes et votre façon de filmer , bravo 👍👏👍
@my-projects3 ай бұрын
Merci beaucoup pour ce gentil et charmant retour😊👍
@tyrone59172 ай бұрын
This is great work please send me your information
@my-projects2 ай бұрын
Thanks a lot for your awesome feedback 👍
@frenchphil1892 ай бұрын
Thanks for the quick reply. I Googled your info and there are many different specifications .... do you have a specific type that you use and if so what is its 'part number' for want of a better ID, please.
@my-projects2 ай бұрын
You can use most of Rothenberger's copper solder - unfortunately I don't have the specifications anymore - it is years ago I bought it 👍- but when I use their copper solder, I am careful not to use too much - otherwise there will be silver joints instead of copper joints.
@ZamirCastillo-Abdullah3 ай бұрын
Hey this is an amazing video and I'm wanting to get into this as a hobby. Any chance you can put a list of all the tools you used with links of where to get them? Also wondering what gauge the wires are, what grit sand paper, and what type of polishing compound you use. I'd greatly appreciate it as the internet is extremely vast and I'm having trouble with figuring out what to buy and don't want to spend too much.
@my-projects3 ай бұрын
Thanks al lot for your nice feedback :) You can easily start with a small gas burner, round pliers, pliers, a small hammer, some hand files and a small vise - and then you're good to go. You don't need to buy expensive jewelry tools - I just use the usual hand tools that are in my workshop. The twisted wire is 2x16G and the thick wire is 10G. I use sandpaper in various sizes starting with 320 and ending with 2000. To finish I use regular polishing paste (the blue one for maximum shine) I don't know what country you are in, but all discount hardware stores have everything you need (also on their websites)
@ZamirCastillo-Abdullah3 ай бұрын
@@my-projects Of course you make some great things man! I've been looking at harbor freight I'm in the U.S they have almost everything I need. And I already have quite a bit of the hand tools and sand paper. I guess I'm mainly trying to find the right solder cause I can't find the kind you use. What kind of block do you use to heat and solder on? Also not sure where to get the sulfuric acid. Is that better than pickle or is it the same? And last but not least do you use boric acid or any type of flux?
@my-projects3 ай бұрын
@@ZamirCastillo-Abdullah I found this on Amazon, www.amazon.co.uk/Temperature-Consumables-Accessories-Conditioner-Refrigerators/dp/B08NB332F2?crid=3CPKUIAHJJ7DN&dib=eyJ2IjoiMSJ9.7bN3_v3LtMJhHoHOlOuz25XZQ5ifAkM5i2yzGVMij-jv3K2O5WrtV3e1akcHk0jeyX6WC7wPsOaz8kaYrPudJQsO6HoOg1ttdEQYBeJCrmNXTYQ77G_O6wr75c76ONIYc7O42Za7Kjj22hP_KXXiHH2n0dJKZbaVmtajgT1ZsEx017lnR8f4eiQOtGBWdZ3zd40Q3E7YhvQSGGz56QdBoG5F_XaxQJCjL1dVWmcpmclzasEhg0BoxBPyXYYHGxSc8QxAs1vQx14IZ6SQuBeLvvmy-KxlxiAIxzD17SkiPaE.e7QOKLzlc-bSHifNHOsdOFjgIIYtSF7yeeOQ9I4is_E&dib_tag=se&keywords=phosphorus+copper+solder&qid=1710699007&sprefix=phosphorus+copper+solder,aps,146&sr=8-23-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&psc=1&linkCode=sl1&tag=darvetholmes-21&linkId=b9a5a4a8f005a98373003ce0fcd75306&language=en_GB&ref_=as_li_ss_tl I haven't tried it but it looks like you can use it - just be careful not to use too much or it will turn silvery. If you can't find sulfuric acid 24%, you can also use sandpaper - it's just more difficult. You can allso use pickle instead - it's pretty much the same. For small solders I do not use flux, but for the slightly larger ones I use flux paste
@ZamirCastillo-Abdullah3 ай бұрын
@@my-projects YOU ARE AMAZING thanks ! I'm going to follow this list and get what I need. For the sulfur acid it looks like I can order online. Is the difference that you don't need to warm it up like the pickle?
@my-projects3 ай бұрын
@@ZamirCastillo-Abdullah I think it's more a matter of attitude - because you can easily also heat it up, so cleaning the copper goes faster. I hope you will enjoy the proces :)
@chrispaterson4942Ай бұрын
What is the turquoise solution ?
@my-projectsАй бұрын
It is 14% sulfuric acid that I use to remove the solder residues.
@smcewen7Ай бұрын
What are the wire reducer tools called that you used
@my-projectsАй бұрын
You can see a similar one here: www.amazon.com/Edward-Tools-Insulated-Stripper-Pliers/dp/B0CPN7PKZH/ref=sr_1_137?crid=135YZYQ7W4RE1&dib=eyJ2IjoiMSJ9.zXgT8I9tAV07XBGyUCd3Gu5kEUuhVIBYv7Ad09ojs-3SG7m_5S072f8SH27cpVokPR7ovmmHIv1MEiNBQEX8J6rb7AVV3zkpgA9WHWAnrUYRc9JYUyokrx19sCLMIm45iMK7uYgUswrEFs54GhOPHZEafi_b62h2un-etIFEmqynbVd20cOMYneUn7x2odQ-SYDM8NUfqLcliEjjth5uWWJkyMhkZzKD9_VN_WI28MWznzkF_EB2iQ8fmL9zNyWNHQ0ZMYVDjVqUQIE0dq180H5AR-9iSgevVEAf-f_D8vg.GqXGKaZLqy4rwunTenYq4vqDUqE9Rx-9wwps3T_nYM8&dib_tag=se&keywords=simple+wire+stripper+tool&qid=1731666712&sprefix=simple+wire+stripper+tool%2Caps%2C159&sr=8-137 Have a nice day. :)
@divinelypurposed6851Ай бұрын
Beautiful! How can we order one?
@my-projectsАй бұрын
Thank you very much - but I only make my jewelery as gifts for family and close friends - but thank you again. ❤️Have a really good day 😊👍
@divinelypurposed6851Ай бұрын
@ You are truly gifted. If you ever decide to sell special pieces like that one, I’m interested.
@my-projectsАй бұрын
@@divinelypurposed6851 I will 👍 Thanks a lot again - I really appreciate your feedback and it makes me happy.🥰
@tyrone59172 ай бұрын
I would like to , know how much would it . Cost for a bracelet are you in the states
@my-projects2 ай бұрын
No - I'm from Dennark in Europe - Unfortunately, the bracelet is not for sale - I made it as a gift for a friend. Have a super good day
@zźx-o9yАй бұрын
What's your solde. Formula ?please
@my-projectsАй бұрын
I use Rothenberger copper solder. Don't use too much - you'll avoid silvery joints.
@Vladimir_68_region18 күн бұрын
👍👍🔥🔥
@my-projects17 күн бұрын
Thanks a lot ☺👍
@WilliamMoussa-x1b4 ай бұрын
ما نوع الساءل الازرق الذي تضع فيه المعدن ؟ وشكرا
@my-projects4 ай бұрын
It’s sulfuric acid (24%) Thanks my friend😊
@joseduarte17195 ай бұрын
Good evening, kindly, what is the diameter of the wires and the gauge of the axle that made the rings?
@my-projects5 ай бұрын
The twisted wire is 2x16G and the thick wire is 10G. The diameter of the wooden stick is 27.5mm
@joseduarte17195 ай бұрын
@@my-projects thank you very much hello attention
@joseduarte17195 ай бұрын
@@my-projects this measurement in G how many millimeters is equivalent to a G conversion of G to millimeters
@my-projects5 ай бұрын
@@joseduarte1719 You can convert G ti mm - and mm to G here 👍 mwswire.com/wp-content/uploads/2024/01/MWS-gauge-to-mm-conversion-chart.pdf
@MisterWood10003 ай бұрын
Lavoro meraviglioso, potrei sapere cosa usi alla fine per lucidare con quella bomboletta spray? Come si chiama quel prodotto lucidante? Grazie.
@my-projects3 ай бұрын
Grazie mille per il tuo feedback. Utilizzo la normale cera lucidante per lucidarlo in modo che brilli, ma infine utilizzo la vernice zapon ipoallergenica per sigillare il rame in modo che non si ossidi così rapidamente.
@wiktorkowalb7770Ай бұрын
Цайзінг класний, бери тверду породу дерева. А оту ковирялку котрою робиш ширші отвори спиляй на конус сплющений ,буде значно легше. Удачі.
@my-projectsАй бұрын
Дуже дякую за добру пораду - обов'язково спробую.
@wiktorkowalb7770Ай бұрын
kzbin.info/www/bejne/d5Lbe2aPmKudq80si=bFB4evx0RQdXf31O , я не спеціаліст, якщо не маєш часу то на третій хвилині. Радий що допоміг.
@alanrobinson62575 ай бұрын
very nice, do you make these for yourself or to sell ?
@my-projects5 ай бұрын
@@alanrobinson6257 Thank you so much - I made it for a friend - unfortunatly I’m not selling it😊👍
@alanrobinson62575 ай бұрын
@@my-projects Im enjoying the videos. may give something like this a go
@my-projects5 ай бұрын
@@alanrobinson6257 you definitely should - Thanks again 👍
@rafosamsonadze95272 ай бұрын
❤❤❤❤❤❤
@my-projects2 ай бұрын
Big THANKS..! 😊👍
@DRAKVLL3 ай бұрын
Is that a Woodpecker in the back every now and then?
@my-projects3 ай бұрын
yes - you are right, I live next to a small area beside a small forest, so occasionally I hear the woodpeckers
@DRAKVLL3 ай бұрын
@@my-projects Oh that´s nice, nature sounds are good for relaxation which is quite needed when focusing on works such as the pieces of art that you produce. :)
@my-projects3 ай бұрын
You’re right 👍 I appreciate your feedback - Thanks 😊
@richardmiller86703 ай бұрын
It’s the Predator
@my-projects3 ай бұрын
@@richardmiller8670 Yes... the big one.
@mishanatanzon2013 ай бұрын
What kind of solder you use???
@my-projects3 ай бұрын
I use Rothenberger copper solder and if I am careful with the soldering I can get a copper colored joint. If you put too much solder on, the copper-colored part will float out, and then you will have to grind away the silver-colored part.
@DemonSlayerDaveАй бұрын
@@my-projectshi, great work! Do you have a link for the exact rothenberger solder?
@my-projectsАй бұрын
@@DemonSlayerDave It is 2 mm Rothenberger Copper solder - you can get it in many places online 👍
@Saykdom4 ай бұрын
Hi can we pass an order for a custom piece ?
@my-projects4 ай бұрын
Thank you for your feedback. I made the bracelet for a friend and unfortunately I do not make bracelets for sale😊👍
@sirdaddy10003 ай бұрын
Can I get you to make me one of your bracelets but in a dragon sense
@my-projects3 ай бұрын
Unfortunately, I do not make bracelets to order - the bracelet was a gift for a friend :)
@barsturk86467 күн бұрын
👏👏♥️ İnstagram ?
@my-projects7 күн бұрын
Not yet - but hopefully soon. ☺❤👍
@darrenstettner5381Ай бұрын
Pretty sweet. I feel like the clasp coulda been more wow than a hook though. Copper is such a nice metal. I’m gonna start telling the meth heads that I’ll buy copper too.
@my-projectsАй бұрын
Thanks a lot.👍 Yes, it would be nice to make another clasp for the bracelet as well. In my next video I am making another and different clasp. Yes, copper can also be used for something good 😄
@ВиталийСтебловский-л7о2 ай бұрын
це колос так робиться. лисячий хвіст робиться по іншому
@my-projects2 ай бұрын
Спасибо за отзыв - хорошего дня.
@WilliamCobleАй бұрын
Dynamis
@my-projectsАй бұрын
@@WilliamCoble ??
@НиколайФедоренко-с2п2 ай бұрын
Какая толщина проволоки и диаметр оправки ?
@my-projects2 ай бұрын
Витой провод 2x16G, толстый провод 10G.
@НиколайФедоренко-с2п2 ай бұрын
@my-projects спасибо
@АлександрШведчиков-1113 ай бұрын
Отлично... Сначала плести из жестких жил, а потом сделать отпуск металла.. Это чтоб плести было сложнее, или чтоб получился кривой и неравномерный рисунок... или всё сразу???
@my-projects3 ай бұрын
Спасибо - последнее - но из такой прочной медной проволоки все равно трудно плести.
@EdwardGrullon-b7k4 ай бұрын
Excellent job with the instructions and craftsmanship!