Crafting Sacred Icons: 3D Printing, Silicone Molding, and Plaster Casting Adventure!

[@p3wp3wCthulhu]

Thanks

[@DoasIDo1]

Wow! Thank you so much for the donation! In fact, you are the first one who clicked super thanks! I am very happy! ☺😍

[@pierrex3226]

Very smart way to save on silicone, using plaster to create the bulk of the mould. Usually people just pour the whole thing in silicone. Well done

[@DoasIDo1]

Thank you!

[@ДедМартыненко]

Мастер !!! Только настоящее Мастера не боятся делится своими секретами !!! Ну и главный герой - рыжик , помощник !

[@A1998GatewayPC]

For a minute there I thought you were gonna actually cast it in bronze. Loved the little guy just curious about the whole process and the little paw going into the plaster 😂

[@DoasIDo1]

My cat loves plaster very much, he always wants to roll around in it

[@automated6225]

Great job, impossible to make without the help of the cat 😀

[@DoasIDo1]

Thank you! 😊

[@blackhawk2788]

The lil shit was a nuisance 😂

[@rodrigoramosdeoliveira5740]

Quanto custa um desses????

[@Ron-Ayres]

@@rodrigoramosdeoliveira5740 The cat?!

[@EZLogikal]

That cat was 100% cat

[@ezequielperalta5463]

Nananana, this is great, a pure piece of patience and skill.

[@DoasIDo1]

Thank you so much!

[@itsbarandogan]

You and your assistant did a great job.

[@DoasIDo1]

Thank you very much, I am glad that you liked our work! 😊

[@CrinosAD]

Great video, great results, and an even greater (and curious) assistant!

[@DoasIDo1]

Thank you very much!

[@digipitta9654]

Under the guidance of cute kitty you done great job. Thanks for sharing your knowledge.

[@DoasIDo1]

And thank you for watching my videos!

[@curiouskitten4351]

Goodness, your kitty was all up in this project! When that paw went into the powder you were measuring I lost it laughing! Your finished products looked pretty good.

[@DoasIDo1]

Thank you very much!

[@mikekiske]

@@DoasIDo1 Hi, there. Which nozzle size did you use? Thanks.

[@DoasIDo1]

@@mikekiske Hello! I used a 0.2mm nozzle and printed with a 0.1mm layer

[@mikekiske]

@@DoasIDo1 Sweet. Thanks for sharing.

[@nickwhitney1534]

Kitty stole the show.👍🏻

[@CeramiTechGraphChim]

Le chat voulait participer au modelage et au moulage. Bonne continuation. The cat wanted to take part in the modeling and casting. We wish you all the best.

[@DoasIDo1]

Thank you very much!

[@chamanlal1883]

Sir really great method,with this method less Epoxy more tiny details we can get Thank you again for your wonderful teaching

[@DoasIDo1]

Thank you! I'm very glad that you liked my video!

[@ericamanda01]

Beautiful results! And who are you kidding, that's not your assistant, it's your boss. lol

[@DoasIDo1]

Thank you very much! That's for sure!😁

[@NicoleHam]

Silly kitty omg. Anyone else say “hey stop!” 😂 AMAZING work by the way!!! Thank you for putting the materials on screen!

[@DoasIDo1]

Thank you very much!

[@Valandor_Celestial_Warlock]

Great video. I appreciate the "show don't tell" format. Have you considered using gold or silver leaf as a finish? That would look amazing.

[@DoasIDo1]

Thank you very much! Yes, I will be making videos on gilding and silvering in the future.

[@roderickbc]

Dude, thanks a lot for sharing your knowledge. I really enjoyed watching it. Your assistant is amazing.

[@DoasIDo1]

Thank you very much!

[@IndoorTechnology]

Congratulations for this project! Very useful and pleasant to watch.

[@DoasIDo1]

Thank you very much!

[@valeriyiva9892]

Отличный мастер-класс. Примерно 4 в 1. Без слов лучше получается, понятней. Нет воды.

[@DoasIDo1]

Спасибо!

[@Farshid-x9d]

I really appreciate how you achieved such a high-quality smooth finish on the 3D-printed part and all those technical details and techniques However, please make sure to keep the cat away, as the fumes can be harmful to animals, especially since they are more sensitive to smells❤🐱

[@DoasIDo1]

Thank you very much!

[@p3wp3wCthulhu]

This is a wonderful tutorial, thorough, well presented and thoughtfully constructed. Your knowledge and love of your craft is exemplified by how well you can teach it to a layman. I wish you abundance. Thank you!

[@DoasIDo1]

I am glad that I can pass on my skills to people who are interested.

[@jonjimihendrix]

I’m amazed the cat didn’t try to lay in the mold itself. Mine would have within 10 seconds. 🐈 📥 Neat video, gives me many ideas. Thank you!

[@DoasIDo1]

Thank you very much! 😁

[@ultraali453]

This really felt like an adventure. Thank you for sharing your video with us!

[@antontudor5724]

❤❤❤ a lot of work stay strong and remember theat artists feel what money cant buy.

[@FrankGiuliani]

Print it in one piece, come on, it’s 2024 😅

[@watchingyoutubeat]

How about printing on the model using a Rolland or mimakki or a canon UV FLATBED printing service just after taking it out from silicon mould, I just shared my plan idea I am going to do , but if you do it's called professionalism... 🎉🎉🎉😊❤❤

[@luchod9339]

Puedes poner al momento de poner el yeso algo para colgarlo y que quede embebido en la figura. asi mejoraria el acabado final. Excelente trabajo, muchas gracias por compartir

[@DoasIDo1]

¡Muchas gracias!

[@p.d.catito3313]

Sveti Nikola good job

[@DoasIDo1]

Thank you very much!

[@derinakgün-w1c]

❤ amazing harika bir çalışma

[@DoasIDo1]

Çok teşekkür ederim!

[@ivanvarovin176]

Можно ещё армировать силикон марлей (в случае если силикон не очень прочный - сталкивался с такими), а гипсовую форму можно армировать сеткой для штукатурки. Про то, что можно использовать вакуумную камеру вы, уверен, в курсе.

[@sparrowpoint6738]

Wonderful video and beautiful cat!

[@DoasIDo1]

Thank you very much!

[@InstructiveTools]

This has just given me a lot of ideas, thanks for the demo.

[@DoasIDo1]

Please!

[@CraftsmanCollective]

Very cool- we love this kind of stuff on our channel!

[@DoasIDo1]

Thank you very much!

[@YesThatPrettyGirL]

STELLAR! SO happy that I stumbled upon your channel. THANK YOU! Certainly a new sub I’ve here.😊

[@DoasIDo1]

Thank you for subscribing!

[@moradmoses3779]

Wow! Good job, May God bless you ❤🙏

[@DoasIDo1]

Thank you very much!

[@A.B.C.58]

most beautiful including the 🐈. i think it is hungry. thanks

[@МАСТЕРБАЛТ]

Круто! Пузырики удобно либо огнем убирать (кухонной зажигалкой), либо феном строительным.

[@DoasIDo1]

Благодарю за совет, обязательно попробую!

Super finishing ❤

[@DoasIDo1]

Thank you very much!

[@LeGenda-2400]

Without the cat, this project is impossible.

[@DoasIDo1]

I agree with you!

[@Diyqueenss]

Love it 😻 love ❤️

[@ayo3Dprint_lombok]

awesome, save it for latter project, but its hard to find all the materian in my place.

[@idizzzful]

Congratulations for your work

[@DoasIDo1]

Thank you very much!

[@CBeleznai]

Great stuff! Why do you print it vertically? Better definition of surface structure? Thanks

[@DoasIDo1]

Thank you very much! With this printing arrangement, the model turns out to be of higher quality.

[@wendypeterwendywendy]

I really liked to see your process great video. However, your faithful assistant stole the show! Can I ask why you did all that really excellent work only to leave the cardboard covers for the hanging on the back untouched? It would have made sense to spend 5 mins with a little acrylic paint even just painting them black. To tie in with the background colour.

[@DoasIDo1]

Thank you very much! I did this just as an example. Not for sale, not for gift.

[@FlyWithSergio]

Vibration will improve bubles. Super nice video.

[@DoasIDo1]

Thank you very much! I will make a vibration table soon

[@petermayer4760]

very good I love mother mary

[@DoasIDo1]

Thank you very much!

[@lamarchedutemps7427]

Nice work !

[@DoasIDo1]

Thank you!

[@GetRealwithMike]

Very nice and excellent technique.

[@DoasIDo1]

Thank you very much!

[@RockstarAlexander]

Прекрасная работа !

[@DoasIDo1]

Спасибо!

[@Elias_Halloran]

Fantastic process

[@DoasIDo1]

Thank you very much!

[@OldManShorty]

the cat was trying to help you lol

[@DoasIDo1]

She always tries to help me 😊

[@OldManShorty]

But as far as assistance go you found a cute one

[@DoasIDo1]

Thank you!

[@NSResponder]

Impressive results.

[@DoasIDo1]

Thank you!

[@Lennart1995]

your cat wants to eat everything lol

[@benedettaparadiso9587]

Il mio sogno per l' arte sacra: dalla stampa 3D al prototipo. Vorrei anche fare la modellazione con software 3D e poi tutto il resto .. ma non conosco niente di queste cose. Dai tuoi tutorial spero di imparare qualcosa. Grazie!! Sei bravissimo 💕👏👏👏

[@DoasIDo1]

Grazie mille! Cercherò di inventare sempre qualcosa di interessante e di condividerlo con voi

[@josephpk4878]

Very cool video. Really good to see a complete process of someone's art. The wall mount kinda freaks me out - only takes a short fall to smash plaster and all that work is gone. I'd be drilling some holes and adding a rigid fastener. Nice job.

[@DoasIDo1]

Thank you very much!

[@nataliasomova5031]

Супер классная работа!!!!!;❤❤❤❤❤❤❤❤❤❤

[@DoasIDo1]

Спасибо огромное!

[@darkblu117zcrookedneck8]

Just wow.😮

[@DoasIDo1]

Thank you very much!

[@sensii2]

Amazing! 👍

[@DoasIDo1]

Thank you very much! 😊

[@jimintaos]

Really nice technique and great results. My only suggestion would be to cast the hanging brackets in place. The bits of cardboard and string don't do justice to the quality work you did on this. Also-I never ever trust glue alone for hanging anything heavier than a paper airplane.

[@DoasIDo1]

Thank you very much for appreciating my work and thanks for the advice!

[@portalmast1177]

I would recommend adding alignment holes to the individual pieces. btw I do this because I have shaky hands

[@apokalypthoapokalypsys9573]

These would serve nicely as Fumi-e.

[@nerminkec4098]

Hello, realy nice work. One question, what kind of softwares do you use to prepair it for 3D reliefs print out, or do you simply find finished product on the internet and print it out.

[@DoasIDo1]

Hello! Thank you very much! I print ready-made models, download from the Internet.

[@Alan_Hans__]

Comes up quite stunning.

[@DoasIDo1]

I'm very glad you liked it! Thank you very much!

[@Stephan39]

The Cat is awesom. 🤣

[@DoasIDo1]

😊

[@jayedwin98020]

Is the plaster base just for supporting the silicone mold? • Would this silicone mold also be appropriate for making a wax pattern?

[@DoasIDo1]

Yes, plaster is needed here only to support the shape. Of course, you can pour wax into this mold

[@CMC440]

Would have sence if model would be Ariella Ferrera. Amazing done!

[@DoasIDo1]

Thank you very much!

[@theirishbear9658]

Oh wow that is gorgeous!

[@DoasIDo1]

Thank you very much!

[@p.d.catito3313]

bravo bratko

[@AlphaWomen-pz7lg]

i have seen mold machines but not simple as this this is great

[@nicolo9093]

Beautiful work my friend, I love it Painting just a thin layer of silicone at the beginning to make curing faster and getting rid of the bubbles easier was very smart of you as well! And I bet the cat couldn't wait to pee inside the alabaster dust hhehheeh

[@DoasIDo1]

Thank you very much! My cat really loves the smell of plaster

[@pierch99]

extraordinaire

[@DoasIDo1]

Thank you!

[@Patricia_larose]

Perfeito😊

[@timl9495]

Awesome !!!

[@DoasIDo1]

Thank you!

[@Dream-Designers]

beautiful

[@DoasIDo1]

Thank you!

[@mogadimetsosanele2285]

@09:13, cat's sniffing coke😂

[@gz625]

Really cool process but I would add wall hangers at the stage of filling the form. These glue gun ropes looks absolutely not convincing

[@DoasIDo1]

Thank you very much! Yes, I agree with you. I completely forgot about the hangers when I was pouring the plaster, so I had to improvise. But I admit, these hangers with glue turned out to be quite reliable

[@JurassicJordan]

This is amazing. But why not skip the mould making process and just print it inverted, perhapse out of TPU for the ability to bend the mold once printed

[@DoasIDo1]

Thank you very much! It is with this arrangement that the print quality is as high as possible. And with TPU it's a good idea!

[@ashchan30]

Beautiful work!

[@DoasIDo1]

Thank you very much!

[@wybuchowyukomendant]

Nice, it came out great

[@DoasIDo1]

Thank you very much!

[@AckzaTV]

13:46 wow looks like chocolate or silver, looks fun to touch, it seems so familiar too, very christmasy, so how many silicon molds can you make from 1 3d printed wax mold anmd cant you just use regular pla to make a silicon mold? and then youc an pour molten metal intoa silicon mold righty?

[@DoasIDo1]

Yes, you can use a ready-made plate to make a silicone mold. I only make castings from plaster so far; I haven’t gotten to metal casting yet.

[@Jorge-MX]

Excellent!!

[@DoasIDo1]

Thank you!

[@pmnirmal6052]

The cat wants to learn ! He wants to smell it, taste it and touch it!

[@zzzvvvqqqfffpupsik]

Шикарно. А нельзя ли сзади вкрутить саморез? А то конструкция с верёвочкой как-то не очень выглядит.

[@DoasIDo1]

Спасибо! Лучше проволоку утопить в еще жидкий гипс. Посмотрите мое последнее видео, я там показал, как это сделать.

[@EtnoZam]

Instead of wire you can sink a hanging fixture while casting

[@victorfloresperu]

The cat, my friend, is not your devoted assistant, it is your devoted director and he likes to steal camera because it is the cat's project.

[@DoasIDo1]

😊👍

[@TKnightcrawler]

Useful video. :)

[@dimebag2486]

Very good job!

[@DoasIDo1]

Thank you very much!

[@dimebag2486]

@@DoasIDo1 Good morning, starting 3d printing, Do you use school glue to improve the bonding layer? It works well? THANKS.

[@DoasIDo1]

Yes, I always use school glue, it works great. But not every glue is good for this, you need to choose the optimal one.

[@vickydonor5922]

Curiosity kills the cat😂

[@pdokoonline]

Great videos

[@DoasIDo1]

Thank you very much!

[@Mattie_LIGHT]

instead of casting plaster products could i use the mold for concrete? will it hold up for a small concrete statute?

[@DoasIDo1]

Yes, you can pour concrete mix instead of gypsum.

[@LouelAbenezer]

Cute 🐈

[@cw4608]

I had no idea the mold making process was so involved!

[@DoasIDo1]

It's actually not as difficult as it might seem

[@battleshipman56]

It's not, this guy is stupid and didn't print it as 1 piece

[@kiwi_cobra]

Absolutely amazing

[@DoasIDo1]

Thank you very much!

[@DavidConstruction-un3uf]

Absolutely splendid! how much is one item/Icon?

[@DoasIDo1]

Thank you very much! I haven’t sold them yet, but if I did, I think they would cost 20 dollars.

[@GaryMcKinnonUFO]

Excellent process and lovely finish. My 'devoted assistants' are also far too interested when i'm printing, mould-making or resin-casting, they're no longer allowed in the workshop :) I make and sell coasters and coaster holders so my shapes are far simpler than the piece you have here, i 3d print them, coat them in epoxy resin to smooth the print and then make the silicone moulds from that. Liked and subbed :)

[@DoasIDo1]

Thank you very much for appreciating my work! Your option is interesting, I want to try it too. Thank you very much for subscribing and good luck to you!

[@breemiumtechnologyhub]

Perfect and Amazing ❤Great Job 👍👍👍👍

[@DoasIDo1]

Thank you very much!

[@sandroneto8733]

show, fantastic

[@DoasIDo1]

Thank you very much!

[@TommyBarnabasDahl]

Nice cat 😂

[@DoasIDo1]

Thank you! 😁

[@СергейМельников-ц3е]

Всё это хорошо, но прошу объяснить, чем конечный гипсовый вариант лучше чем первоначальный пластиковый? Если бы речь шла об медной/бронзовой отливке. Или о серийном выпуске гипсовых изделий в покупных литьевых формах, я бы ещё понял. В чём смысл?

[@DoasIDo1]

Пластиковая печатается сутки, а гипсовая делается 30 минут, вот и разница

[@raymond6845]

Wow, this comes at the perfect time for a project I want to make! Thank you! Can I ask what the different colors of silicone meant? You started out with a red/peach, and then moved to a blue for the second pour, and then an even deeper blue for the last Thank you for the inspiration!

[@DoasIDo1]

Thank you very much! Different colors of silicone are needed so that I can see where I applied it. If the silicone is the same color, then when applying the second and third layers it is difficult to see where the silicone is and where it is not. I hope I explained it well

[@raymond6845]

@@DoasIDo1 Explained very well! I never thought of that, but I can see how that is something that could be an issue. Thank you for the tip!

[@largadeugnt]

You're amazing! Thank you.

[@DoasIDo1]

Thank you very much!