Crank Up The Power! Losi TENACITY TT Pro 4WD Brushless RC Truck Review | RC Driver

The crew at Losi has really stepped it for the off-road enthusiast who wants performance handling and impressive electronics in a ready to run basher truck. We got our hands on the new Losi TENACITY TT Pro 4WD Brushless RTR RC Truck and we were impressed before we even opened the box. The TT Pro features a Falken (Or Brenthel) liverey on the trophy truck body and it has an LED light bar in the grill. Under the body is the rugged SCTE based chassis and suspension that are proven both on and off the track. This truck is loaded with Pro level parts like lightened chassis, aluminum shocks, aluminum shock towers and threaded turnbuckles. The big wow is the Spektrum electronics that will boost this truck to some insane speeds! In this video, we go over all of the important features and show you how the Losi TENACITY TT Pro performs. This is one review you can’t miss!
PRODUCT FEATURED
Losi TENACITY TT Pro
By: Horizon Hobby
Part Number: LOS03019T2
MSRP: $429
Link To Buy
Falken: snp.link/26a3b7a9
Brenthel: snp.link/da31f1f1
Shop For RC: iconrc.com/
DRIVER SHIRTS & MERCH: teespring.com/stores/rc-drive...
Don’t Miss A Thing! Follow Us:
Subscribe: bit.ly/SubToRCD
Website: bit.ly/VisitRCD
▶ Check out my gear on Kit: kit.co/RCDriver_Online
*Notice: Some of our articles, videos and descriptions may contain affiliate links or coupon codes, which means that if you click on or use one of the product links/ codes, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Thank you for the support!
#rcdriver #Losi #rctrucks

[@Th3wook]

Great review it definitely helped me decide on getting one and it’s been amazing so far!!! I couldn’t be happier, thanks for the work and reviews you do!

[@TheRcKiwis]

Awesome looking truck!! We're definitely going to have to get one of these for our channel! Cheers for the educational video!

[@sylvainster30]

Great review Greg 👍🏼 now i want one 🤤🤤🤤 Thanks for sharing the passion ✌🏼😎👍🏼

[@fogcityrc4874]

sweet vid! I have never seen a SC truck back flip until this video!

[@cwatson42785]

I got this truck right when it came out but haven't run it yet lol. I'm definitely liking everything so far. Seems very well made! I had to have it after seeing how well recieved the db was! I got the brenthal version

[@rc_dubai]

love your videos!

[@voodoostroker]

I like the single cab body 👍🏼

[@ReadySetRC]

Did I see several backflips🤔 WOW! Great video Greg👍👍

[@Flying90]

So rad! I would love to get one of these trucks!

[@DoubleClutchProductions]

Such a cool truck

[@TruSwagTv2]

That truck is so cool 🤜🤛👊😎💯🏎🤝💪

[@IDriveAnAudi]

This is a great truck! I have the yellow/black version. It's really fun out of the box. I have a problem with my steering assembly right now and need to take it apart, but I had already purchased the Exotek upgrade so I need to do that anyway. Love the truck!

[@bigjay4142]

Just picked one up other day The black and yellow one it was A tough choice as the falcon color one is awesome to it is an awesome truck I ran it on 3 s with the 15 t Pinion gear on it and still would do wheelies on the grass field I was running on I Definitely agree if anybody’s looking for a fun basher truck this one is a great one to get

[@rcadventuresunlimited]

great basher 👍👍

[@mikehagquist5198]

Best looking rtr sct. Clear window 😊

[@kubeanie18]

We bought it awesome so far

[@timvanasen6711]

Great review Greg always very detailed wife & I have 2 db pro's great rig, I'm ordering one of these Brenthal livery, for a mod I'll see if the db pro cage with interrior and rear hinge will fit 😉👍

[@closed2459]

It's green paint reminds me of 70's refrigerators

[@LulzRoyce]

Why nobody use a dust cover!?!? Keeps your internals 99% dust free, let alone gunk and dirt. Good spacious 50% meshes will not cause your motor to overheat.

[@surfside75]

Bought these method/falken wild peak tire wheel set for my baja rey raptor 👍

[@8ightgeek]

What diff weight would be perfect for my losi? Im planning on tracking mine!

[@Josue.Vargas]

hey which would you pick? Losi Tenacity TT Pro vs ARRMA Senton 3S vs Slash Ultimate?

[@paulleguyt7817]

Are these wheels and tires exactly the same (size and compound) as the ones on the tenacity DB Pro?

[@Firewlkre]

I like it! That truck body is going to protect the shock towers and shocks better than the buggy. Does it have more ground clearance?

[@SuperEightOneEight]

great sct there,,,anyway,,how dies it compares to tekno sct410.3?....anyone got both to elaborate?

[@AJ-js1yw]

Hello. When you say its based on the losi TEN SCTE, Do u mean the chassis? Arms? Shocks? And if i may ask, what version scte? V1 V2 V3? Thank u

[@cows1990]

i';m very impressed with this truck. You dont need to upgrade anything. Much better than that other SCT everyone gets.

[@Sackmatters]

Than that other sct lol. I don’t think a slash is even a sct until it has a lcg chassis.

[@RodEvens]

Can I or shouldn't I add shock limiters for racing?

[@michaeljones5512]

Question for everyone I may have to take my losi tenacity TT pro short track truck the front steering differential broke I am trying to get a stripped screw one off my question is for everyone on this page can you help me out with some advice as a beginner and so that way I know to put it in a shop and get it fixed

[@gm3353]

falken livery classic - seen it many times on 911s in IMSA GT racing

[@Duececutty6972]

I appreciate all your reviews. You do an excellent job. I really like this truck but I also like the Traxxas Slash. I’m torn with the Slash Ultimate and this Tenacity. Just bashing at the local track. Which one do I go for?

[@TheRoadTaken]

I have this request, too.

[@Duececutty6972]

Well Since posting this a while back I’ve owned both for a while now and the Losi is 10x better in every way. Not saying the Slash isn’t good because it is and it’s a must own for me but the Losi tenacity is a straight solid beast!! Can compete at local races as is.

[@TheRoadTaken]

@@Duececutty6972 Thanks for taking the time to reply. I'm looking for something that is compete worth as-is at least at first to make sure I enjoy the hobby (and can afford it!) LOL

[@Berrystrongsauce]

@@Duececutty6972 how does it fair on a track? I have a teckno sct and trying to get my bro into rc again and this tt pro seems like the best option for a cheaper durable rc that he can race some.

[@Duececutty6972]

@@Berrystrongsauce The TT PRO is the best RTR truck out there. No comparison. No RTR truck even close.

[@donniemarks94]

Is it better than the arrma senton 3s?

[@muddygus]

Rookie here....Will a 3s Lipo 100C, be okay in this truck?

[@xWORLDxCHAMPIONx]

Do you think it’d do any good on a track? If it’s controllable enough it could run in the 4X4 short course open class.

[@DR-ip1rh]

Nope, it doesn't hold up very well... found that out the hard ( and expensive) way. I got this truck about a year ago, and I thought the same thing... I'll get a truck that's based on a race truck, and I'll be able to have a bit of fun at the track. The TT Pro wasn't out yet, so I got the all plastic brushed motor version. I also got the "Proformance" kit, A HobbyWing 120A ESC/3660KV Motor combo (great combo for this truck) and a Turnigy GT5 transmitter (not a bad little transmitter, since I don't race competitively) which made it mechanically identical, and electrically comparable to this. I took it to the local track running 2 cell lipo (6000mah Nanotech) and literally blew out the shocks halfway through my second pack. These shocks are the old style, with e-clip retainers for the pistons. I pushed both rear shock shafts through the pistons, embedding the e-clip into the piston. Fixed the shocks and took it to the bike park, doing some big jumps... happened again. It's fine for bashing, and ripping around parking lots and parks, but the track is another world. IF you want to race, or even if you plan to use it a lot, do yourself a favor: GET THE TLR SCTE 3.0 instead... it's A LOT better. It's more expensive, but it will save you money in the long run. Better shocks, better chassis, better tunability, better bearings, much better drive line components, MUCH MUCH BETTER MOTOR MOUNT (weakest part of the Tenacity)... basically, better in every way... Trust me... I've pretty much upgraded my Tenacity into and SCT 3.0... I should have bought the SCTE to start; would have cost less. I actually have the chassis plate and related hardware coming in a few weeks to make it official... after that, I'm going to stop calling it a Tenacity, since the only things left from the Tenacity are the diffs and the body mounts. I've done everything else... (Except the shocks and towers... For that I got a set of 8ight T 4.0 shocks second hand on ebay, rebuilt them, and made some towers to fit them.) I even made an adapter plate to mount the SCTE motor mount and center diff carrier to the tenacity chassis plate because the stock motor mount is so unreliable. If you want it to be reasonably reliable at the track, here's what you'll need: Wheels and tires (The stock rims are brittle and weak, and the stock tires are better for ware than they are for grip. Talk to the guys at the track and find out what works best on your local track); shocks (Probably the best thing to get is the SCTE 3.0 shocks. There are other options, but shocks are one of the things Losi does really well. I think the TLR 22 has the same shocks, but I'm not 100% sure.); Bearings throughout (Pretty much anything is better than stock... I got the cheapest ones I could find on ebay, and they have outlasted the stock bearings by far.); drive couplers and outdrives (I wore out the stock ones in about a month of bashing at the park... put in the SCTE 3.0 ones, and it's been about a year, and still have lots of life... one thing to note is that you will need to grind a flat spot on the input shaft on the differential to use the SCTE drive couplers. I did it with a dremel tool.); Steering servo (Again, pretty much anything is an upgrade from stock, but if you want to be competitive, or even hold you're own at the track, you should really think about spending some money on a nice steering servo.) A couple other thing to watch out for on the Tenacity: The motor mount; it's made form terrible steel, and is poorly designed. Check the screws regularly, use loctite, avoid removing it if you can, and pray that the screws don't strip; the hinge pin mount covers can break. IF this happens, the lower suspension arms can fall off at the inner hinge.. Make sure to keep spares... Again, the SCTE 3.0 has much better ones... and they do fit, but they are expensive... Do those things, and you'll have a reasonably reliable, not quite competitive truck that you can sometimes take to the track and not have to worry too much about... again... really... if you're going to use it a lot, or you want to take it the the track, you're better off getting the SCTE 3.0... you'll end up spending the extra in upgrades and replacement parts eventually anyway.

[@ShutterContinent]

@@DR-ip1rh you are referring to the plastic base model Tenacity from the sounds of it, not the pro? This one has aluminum chassis, towers, shocks, etc

[@DR-ip1rh]

@@ShutterContinentthe Proformance kit upgrades the plastic version to basically this exact vehicle, but with the bumpers of the scte design. The Proformance kit includes the exact same aluminum chassis (with the battery holder, servo mount, side guards, and chassis brace) aluminum shocks, aluminum towers, and antisway bars.

[@EriMCardenasRC]

Its a Losi 🤷‍♂️🔥

[@cuzexa8612]

I wonder if the body will fin on my slash

[@STEVOD313]

I'm really liking this one, seems very solid

[@cwatson42785]

I grabbed one of these last month bro! It's a really nice truck! I definitely recommend it!

[@willshealy3687]

I have a regular tenacity sct and it is trash. I have broken two chassis from light use. So disappointed in it the place it always breaks is towards the front.

[@cwatson42785]

@@willshealy3687 No offense but isn't your comment totally irrelevant with this truck? Fact is this truck has the aluminum chassis so your bad experiences wouldn't fiqure in here. Do you know they make the db pro kit you can buy? Maybe instead of grabbing another stock chassis and have it break grab the aluminum chassis upgrade.

[@willshealy3687]

Chris Watson actually I play on doing that hopefully it will actually be decent

[@mfp5]

Great video Greg!! Losi has another hit on it's hands! Question...I already have a DB Pro, is the TT Pro different enough to warrant picking up...or do you think they're close enough in driving capabilities/characteristics that it would be a little redundant?

[@SebastianLong]

I don't own the TT Pro but I do own the DB Pro. I feel like it would have the same characteristics as far as the drive goes if you ran your DB without the wing. Other than that I think the parachute effect from the body may be the only other difference. There essentially is very few differences between the two and you could turn your DB into the TT by changing bumpers and body mounting components. I think getting both would be a waste of money, but like I said, I've only got the DB Pro. Just stating my thoughts.

[@rcdriver]

Michael Plummer Thanks! The TT has slightly different handling traits, some because of the body, but I don’t think it’s enough of experience difference to add the truck to your collection. The DB is pretty awesome. Hope you’re enjoying it!

[@mfp5]

@@rcdriver That's what I was thinking. Thanks for the input!! I absolutely love the DB Pro...it's one of the best cars I've ever driven!

[@desmocharlie]

Great video Greg! Question: I just got one TT Pro and when I drive it with the AVC/ST. Rate at 25% the truck runs fine but if I dial it to 100% I get a lot of shaking and I loose control completely. My transmitter is the DX2E. Have you experienced anything like that? Is there some setting I should do? I already bonded and calibrated the receiver; calibrated the ESC; increased Drag Brake Force to 40%. Thank you for your help!

[@tylorarcher8439]

As you drive these trucks the front end gets light so when the AVC is set to 100 it’s working really hard to keep straight and the steering servo is making a lot of quick adjustments to try and keep it at what it thinks is straight. I’ve been running mine with it off

[@SavageX125]

I recently picked up this truck and my local hobby shop. Out of the box the truck only works half the time. I turn it on sometimes no drive or steering, reset the ewc and calibrate it, and then I’ll have steering and drive but no brake or reverse. Reset it again, and then it’ll work with steering drive and reverse with brake. I’ll drive it for a bit and if I stop then it’ll cut out and stop driving. I changed the connector because spektrum batteries are ridiculously over priced. But needless to say not impressed with a $670 CAD truck. Gunna wait a day or two to cool down before I call losi and rip their head off.

[@blazinghobby7089]

wait a backflipping SC truck thats illegal

[@mongillohockey]

I’m torn between the Tenacity TT Pro and the Traxxas Slash 4x4 Ultimate. I get that the Traxxas has better parts availability but the TT Pro looks way better. Which one should I go with and why? They’re only $50 price difference and that doesn’t matter to me.

[@scooter2202]

What you ended up going with? My final decision is based on parts available/compatible(short term/long term). Debating between this one or one of the traxxas short course trucks.

[@XARIER39]

Would you consider this and the DB still relevant? Or is there another brand or model you see as better today?

[@codenamethecleaner7519]

These are new still so still a good choice

[@maxxdavidson7795]

will they make a truggy version

[@itubebigtime]

It does not seem to fly very well, as most stock short course trucks do. The Buggy is definitely better in that regard. Keep up the videos 👍

[@mongillohockey]

How does this compare to the 1/10 Losi Baja Rey? They look the same and the price is similar. Thanks!

[@SG-wj2qj]

This truck is 100% better for racing and bashing. The baja rey is awesome in its own regard but it’s design and cage makes it very unstable on a track, a bit more fragile on crashes - specifically the rear end. The baja rey does make for a more fun leisure driver. Small jumps, fly bys, watching that rear end dance.

[@devancummings4312]

Who’s making aftermarket parts for this truck? Picked it up a couple weeks ago and want some aluminum upgrades.

[@EugeneRCDrezgalovo48rus]

Супер 🇷🇺👍😉

[@closed2459]

Like hotwheels all the bottom plates the same just cast a differnt top

[@MRanger04]

This is a race truck in disguise. All it needs is tires and some small suspension changes to dominate. I raced the losi ten scte when it came out a few years back. It was a very good truck. They made upgrades for it. Now they offer the 3.0 version in a race kit for what this rtr cost. I recently bought one of these and it’s just like I remember. Except this truck includes the quality parts you would want. Personally you can’t compare arrma to a losi. Losi/tlr is next level or better. Compare arrma to traxxas makes more sense to me.

[@GTPRIME209]

Dang, I do not like the exposed receiver, now I'm contemplating returning my newly purchased TT because of this.

[@ShutterContinent]

It is weather resistant, that is the style on these trucks. Traxxas has boxes if you want one

[@veliness7883]

Could this body fit on a slash 4x4

[@rcdriver]

Bryce Vitiello Sorry, I don’t have a Slash 4x4 assembled to check but it should or at least be close. Might have to drill new mounting holes.

[@veliness7883]

@@rcdriver Ok thanks. I will not mind if I have to drill mounting holes.

[@nobodynoone3428]

@@veliness7883 It should. They're about the same size. Losi bodies can be extremely expensive though. Some are more than double the price of other brands.

[@randyaguililla6963]

Standard or metric hardware?

[@DavidFernandez-sc5ws]

Randy Aguililla metric

[@h.w.m.306]

Nice vid! I'm looking for a trophy truck for under 300 bucks that's brush less. I'm saying 300 bucks because shipping to Dubai costs ALOT so I'll be glad if you can help

[@doug148877]

The senton 3s brushless is 300 dollars, the stock electronics are junk though (in my opinion).

[@DavidFernandez-sc5ws]

Pro mt next?

[@nobodynoone3428]

or truggy

[@Texasbroski512]

I wish I would have drywall tape and shoe goo the body I broke the front of the body first day smh

[@nobodynoone3428]

Seems like this should be a little cheaper than the DB. Nice truck though.

[@rjcorrea6640]

Shame, I actually would like to get this rig but but it isn't available in the UK unless I order it states side. But the the delivery and tax would be too much already with the price of it

[@smellurfingerrcdejesus9176]

Did you know that they make a falcon toy that has a Mercedes in it and it's the same color scheme same design it's from Hot Wheels I'm buying it

[@gm3353]

this vs baja rey vs slash 4x4 ultimate - go

[@PoundsofRandom]

review the sonic car from legendary.com

[@George-hr5cv]

130 amp speed controller should be able to take 4s power

[@MrAlexsasax]

Motor is 2-3S

[@George-hr5cv]

Aleksandar Pantic the motor could take 4s with lower gearing. Kevin Talbot ran the traxxas 3500 KV velinion motor on 6s and 4s in his slash 4x4

[@MrAlexsasax]

George Antos I know, you can run it on 8S if you want😀

[@OffTapOzzy]

Would love to see this truck come in a nitro version, Electric power does nothing for me.

[@dglewis89]

They used to have one, it didn't sell good enough to keep it in production. It was the TEN-SCT Nitro.

[@RUZTY1311]

Steel spur? You sure? Not even the Lasernut came with a steel spur lol

[@alphaalpha7758]

This or baja rey?

[@stattonracer]

Got one and love it! But the transmitter is junk!

[@rcdriver]

statton Isaacson What don’t you like about the radio? Not a fan of the plastic wheel, but the functionality is good for an RTR radio.

[@cwatson42785]

Are you confusing this with the stx2? Cause this remote is pretty good!

[@travisdrury5556]

Db and tt are same except for bumpers, body and tires

[@nobodynoone3428]

plus wing, wing mount, body mounts, drivers, roll cage...but you're basically correct

[@EugeneRCDrezgalovo48rus]

like, like, like 👍 👍 👍 🇷🇺🇷🇺🤘👍😉💪

[@pinheadrc6027]

I just bought this for my wife for mothers day. We both have the tenacity db pro so im afraid i might one of these after i guve it to her. Check us out happy bashing friend

[@doug42780]

I really like watching your videos. Very helpful. But I got to say the music in the back ground when u are talking isn't very helpful. Just saying I think it would be better if you don't have it there

[@rcdriver]

doug Miller Thanks for watching! I took a poll a while back and more people wanted background music than not. So I went the music route.

[@insanemadmanroom2299]

Get a net for it had to for the mojave from all that dirt

[@mojaverc1585]

SCT problems hey!

[@firasoji304]

Since its $430 3s, do you think its a better truck than the 4s $400 kraton? Or is it just overpriced?

[@paulclancy2404]

The quality is little better with the losi . More race performance the Kraton pure basher both great I own versions of both

[@paulclancy2404]

4s is too much for slippers imo and 3 all you need imo

[@paulclancy2404]

Made me think lol if your good driver older been around you like losi better your young go skateparks get the kraton

[@paulclancy2404]

@@philthyco1 facts I like em both what's up brotherman. When I was younger I was sct guy they were the best bashers .

[@paulclancy2404]

@@philthyco1 lol you are..., seems like popularity died , I had 4 or 5 slashes now 2 and ralley car , one is all integy and strc that I never completed , I need the pins with e clips .

[@jlo96f3]

They all look the same, well under the body

[@1peanut]

center diff SC with aluminum chassis and shocks ? traxxas slash is a toy compared to this professional grade RC and almost same price. there is toy grade. hobby grade, Professional grade.

[@matyasfabok5532]

This or BAJA REY??

[@SebastianLong]

My honest opinion, Baja Rey. It's more durable, but it rolls easier. I'm not saying it's obnoxious rollovers, but it just happens more often. I've got the DB Pro which is nearly identical and my brother has the Rock Rey which is pretty much identical to the Baja Rey. I've broken the DB twice. First isn't actually a break persay. Pulled the treads out of the rod end on a shock on a bad landing. The second, also my fault was I split the rear hub in two. I'm used to much larger RCs with slower air response. On another note, I've got the Super Baja Rey which, for the bind and drive, is only about $150 more. 😉

[@matyasfabok5532]

@@SebastianLong thanks very mutch!!

[@paulclancy2404]

@@SebastianLong now put that way I slept on bnd sbr now it's not available and now I ordered db pro which probably shouldn't have bc I'm buying 4.0 losi truggy that more likely going convert to electric

[@SebastianLong]

@@paulclancy2404 The BND SBR is available and in stock on Horizon Hobbies. Not sure which site you buy yours from, but I just double checked myself. Probably restocked if you use HH. I'm not sure if you seen when the price dropped to $499, but I picked up two. One for my brother and one for myself. I haven't driven mine yet as I was to put the 750 kv motor in it. I also have the Super Rock Rey so I'm not bothered by not driving it. The SBR is a sweet RC for sure. It is currently $599 on HH if you were interested. 😊

[@paulclancy2404]

@@SebastianLong maybe I was crying I lost the sale lol and bnd was out of stock or they brought it back I do use horizon I just got the mini t anniversary from them usually use tower hobbies and they had bnd 500 like you got yours and ik great price for that rig , when it came out it was close to 800 after taxes just didnt have it back than. I did manage to get a 5t for 1000 out the door which really good price at the time. I'm actually going to lhs to get the 8right 4.0 truggy I wanted that truck for long time and they discontinued it .I also did want the sbr lol .

[@urdonercjeremyburris7541]

Looks small in the running video and stiff

[@ChrisShepard8122]

Losi is no longer Losi now that Gil is no longer involved. Brand has gone way down hill.

[@rcdriver]

Chris Shepard Horizon hired Gil back as a consultant for TLR and Losi.

[@ChrisShepard8122]

@@rcdriver That's great to hear. 👍

[@mikepasquale7415]

I bought one and it sucks.. pulls all over

[@rcdriver]

Mike Pasquale Depends on the surface. I noticed some diffing too which I mentioned in the video. Some surfaces it was ok. A little oil tuning should help it out.

[@paulclancy2404]

I read alot of the comments its amazing how the db was is nothing but praise and it is a let down , goes show how much tuning aerodynamics and lil extra weight will do even with all the same components

[@deltazero3796]

Oversized Overpriced crap With ugly Falken livery I see no fun in driving this junk while. at least 40% of price is for some half ass liveries.

[@BASSstarlet]

Same as the stupid expensive body shell of Kyosho!

[@cwatson42785]

Lol funny you say that, with almost everyone I know who had the db pro said it's their favorite truck of 2019. And I had yet to hear any negative comments about it before reading yours.

[@smiley37greg]

I think that they are trying to unload all of the Tenacity db, sct, and mt replacement parts piled to the rafters in their warehouse . Losi/HH should have released this version 1st IMO. Maybe consumers wouldn't be so skeptical about their rerelease of a platform that didn't perform or sell very well.