Thanks so much for this. Was able to disassemble my own pedal which had a broken coil spring and I followed your video to get it all back together with new parts etc.
@mariomata96634 жыл бұрын
Thanks for you video, really it will help me because I have the same problem than you with the coil (lost its force and starting to make metalic noise and loose the cleaps so easy). Before start with the service, I have a doubt, the piece that you dismounting in the minute 2:20 of your video, it`s really screwed to the main body or is press fit mounting. I told you that because your unscrewed to take it out but I´m not sure if you do that because is easier to take out or because is really screwwed?. Thank in advance for your answer.
@speedybenji Жыл бұрын
Yes it's definitely screwed! Thanks @maliapostol for your video...followed everything to the letter (even the scary hammer to put it back with the spring on it!) and my pedal's been resuscitated !!!
@MoiGospodin016 ай бұрын
best
@viteslibisiklet2355 жыл бұрын
Refresh kit and spring, it think buying a new pedal with new cleats is good idea
@mariusreiter9493 Жыл бұрын
Thanks for this video.But I've been trying this for 2 years without success, you make it seem so effortless. My pedals are like welded together. Even put them in the oven to melt the thread lock, still not a chance to unscrew them unfortunately, even my locking pliers slipped and just created deep scratches. Maybe It's time for some new pedals after 10 years.
@dickystreets2 жыл бұрын
Buenas 👋 😉 En mi modo de ver creo yo que azeite 20w 50 vegetale es mucho mejor para manteminiento del ejo. Saludos ✌️ 😉 👍
@felixantoinetremblay5 жыл бұрын
Thanks!
@Eisencyanblau6 жыл бұрын
Eggbeater 1 - лопнула пружина через полгода после покупки, такое же дерьмо :(
@andrewhill38476 жыл бұрын
thanks for the great video, will this technique work with the eggbeater 11 aswell.
@wojciechpyjor6910 Жыл бұрын
Super manual !
@tommasomoncini Жыл бұрын
Hi I have another problem ... externally the 4 wings of the pedal have an oscillation as if the central spring could no longer hold them still do you know how to help me? Thanks
@maliapostol Жыл бұрын
I am not shure about your problem. Maybe, mount on the spring are worn out so you have loose spring.
@tommasomoncini Жыл бұрын
@@maliapostol Yes i find this video but i think is not so easy. Is it possibke to replace the spring? kzbin.info/www/bejne/hmmno4yEl7V0f68
@maliapostol Жыл бұрын
@@tommasomoncini I belive it is possible but I didnt try.
@germane30684 жыл бұрын
what kind of eggbeater are this, eggbeater 2 or 3 or what?
@maliapostol4 жыл бұрын
Plant-Based-Rider it is model 3
@eng.ricardogarcia2 жыл бұрын
Thanks a lot. I need to refresh my spring
@wesleypereira87592 жыл бұрын
Também queria saber como retirar a mola
@maliapostol6 жыл бұрын
yes
@peterbee88924 жыл бұрын
I have crank brothers eggbeater 3. Any idea how to get the needle bearing out of the pedal body.
@maliapostol4 жыл бұрын
Peter Bee you need to buy refresh kit from crankbrothers and inside is tool for needle bearings. There is protective ring inside axle in front of bearings so without tool you can make damage