Crankshaft Position Sensor Test

[@heikkiparn6129]

Aitäh!

[@screwsnutsandbolts]

Thank you for the support, I appreciate it ! 👍👍

[@markwilliams2830]

Excellent description detailing how these components work.Thank you

[@screwsnutsandbolts]

Thanks Mark ! :)

[@justingobeil]

Very well done, easy to understand, specific in application, I like it!

[@screwsnutsandbolts]

Thank you !

[@DavidHill-mq8ef]

Always good for us DYI guys, great video simple to follow

[@screwsnutsandbolts]

Thanks 👍

[@turboboy-oq6xe]

Thanks!

[@screwsnutsandbolts]

Thank you very much for your support !. I really appreciate it ! 👍👍

[@OpaM-so3tw]

very clear thanks, been robbing old junk yards, have an old 98 chev 1500 dont want to let go of. New engine , new tranny, changed the brakes a thousand times, can't count the replaced cv joints etc.

[@OpaM-so3tw]

old just like me, but I am older.

[@hk809]

Thank you very much for this valuable information..... Greetings from Turkey....

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@darkojankovic6440]

Great video man. Very helpful! I have problems with this sensors, but i didnt know how to test them.

[@screwsnutsandbolts]

You're welcome !

[@contagiousdoge3054]

Best Nissan micra channel always ❤❤❤🎉🎉🎉Keep it coming love them all💯💯💯💯💯thanks

[@screwsnutsandbolts]

Thank you !

[@amarsta]

Thanks! FSM doesn't have this info anywhere 🤯

[@florinapetrei6106]

Foarte bine explicat !

[@screwsnutsandbolts]

Thank you !

[@berndb.5097]

Well explained and a very good presentation. I am highly impressed. You are a good teacher 🙂😎

[@screwsnutsandbolts]

Thank you! 😃

[@sawkpawn4071]

Thanks you for explaining how each sensor works and what it is sensing. Helps a lot! And also how to test it 😊

[@screwsnutsandbolts]

You're very welcome !

[@Abdultechnicalzone]

Bro u teached Very well. clear

[@screwsnutsandbolts]

Thanks for watching !

[@hammadk15]

this is amazing, my k 12 micra wont start , cant wait to get going on this new information . Godwilling it will be fixed and this is the issue and not the timing of the engine. which could possibly be out

[@bogdanluca02]

Hello, you fixed your micra?

[@beachwave2]

Excellent video. Thank you.

[@screwsnutsandbolts]

Thanks for watching !

[@stephenrose8188]

Best video by far, brilliant!

[@screwsnutsandbolts]

Thanks for watching !

[@GeorgeGarcia-k4q]

Perfect now this is a great and helpful video

[@screwsnutsandbolts]

Thanks for watching !

[@RuthMoses-ok7tx]

Fantastic job

[@screwsnutsandbolts]

Thank you! Cheers!

[@subcontinentpoetry7424]

Wonderful video sir plzzz just like this practical video plzzz plzz for god sake make an EFI course videos series as well

[@JohnSmith-ok9sn]

Excellent video. Subscribed!

[@screwsnutsandbolts]

Thank you !

[@randyfazio8559]

great video. very helpful

[@screwsnutsandbolts]

Thanks for watching !

[@colin5064]

Nice and simple excellent video

[@screwsnutsandbolts]

Thanks for watching !

[@이또리-k1c]

나는 그것을 즐기고 있다. 좋은 동영상입니다!

[@screwsnutsandbolts]

Thank you for watching !

[@AlexanderMasara-q9s]

Good video and informative

[@screwsnutsandbolts]

Thanks for watching !

[@jimwalenciak2054]

Excellent video. Perfect

[@screwsnutsandbolts]

Thank you ! :)

[@ArmandoSanca-mv8el]

U do Nice job my brother nice work

[@screwsnutsandbolts]

Thank you !

[@user-2uf2kr2c]

Hello, nice vid. There seem to be 2-wire sensors as well? Regards

[@gerhaldlaubscher8321]

Great video!!

[@screwsnutsandbolts]

Thanks!

[@yanuarlaksana2799]

Thanks for your sharing experience Excelllent video

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@itzikvil1]

best video on KZbin. thanks a lot mate.

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@elwrencho101]

Awesome outstanding tutorial 👍

[@screwsnutsandbolts]

Thank you 👍

[@GabrielEbenezer-b2s]

That's good bro you just got a bew subscription by me 👍

[@screwsnutsandbolts]

Thanks for the sub !

[@johnsonikechukwu2741]

Lovely teaching

[@screwsnutsandbolts]

Thank you! 🙂

[@francisdsa6790]

Appreciate your test 👍

[@fatihsermer9676]

In my car, there is voltage at the middle signal terminal when the ignition is on and the sensor is not installed. Is this normal?

[@dunaweezel]

Thanks. In my case the cam and crank sensors both kinda alternate the 5 volt and 0 volt (.3v) As in every couple swipes it may stay at 0 v or it may stay at 5v when the wrench is pulled away. But both are doing the same thing. Does that sound normal. Thanks

[@Couldntthinkof1gudenuff]

Another awesome video 👌🏻thank you.

[@screwsnutsandbolts]

Thanks for watching!

[@СержантАндриевский]

it is more reliable to check it with the magnetization force (it should hang 2 medium coins hanging one after another - like chain links).

[@richarddiaz8248]

Thank you for your expertise

[@screwsnutsandbolts]

Thanks for watching !

[@smuth_official]

thank you very useful 🙏

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@timzdubem40]

Very useful 💯👍🏽👍🏽

[@screwsnutsandbolts]

Thanks for watching !

[@dogniunsergedouho5361]

Wouah Thank you very much I love you ❤️🙏

[@screwsnutsandbolts]

You're welcome 😊

[@tamilarasan5287]

நன்றி சகோதரா❤

[@screwsnutsandbolts]

You're welcome !

[@MisraransarMisraransar]

God bless you good information

[@screwsnutsandbolts]

Thanks for watching !

[@bogdanborys536]

Good job, men!

[@screwsnutsandbolts]

Thanks!

[@meassavuth4649]

Hello sir , crankshaft and camshaft sensor are same functioning or different functioning ?

[@HonrUk]

Very good video

[@screwsnutsandbolts]

Thanks for watching !

[@kojocisco]

So how to test 2pin sensor? Mine cam is 3pin, crank is 2pin.

[@64arguz]

👍🏻💪🏻 thanks !

[@screwsnutsandbolts]

You're welcome !

[@hayleyesuskassa6473]

Thank you very much

[@screwsnutsandbolts]

You are welcome

[@davebrown4699]

I love this, is testing the camshaft position sensor the same?

[@screwsnutsandbolts]

Thanks, yes it would be the same process

[@ugurg2273]

Thank you for your informative videos. Can you help me with the speed sensor of my 2005 Yaris?

[@chownzi2461]

What if I have no signal voltage something with the wiring?

[@shatrimatri5266]

Signal voltage when Crank the engine coming from the ECM. First check the wire connection from the sensor to the ECM. If connection is good than the problem will be from the ECM

[@antoniosocorro6841]

Bravo! Thank you so much.

[@screwsnutsandbolts]

Thanks for watching !

[@ManuelMarco-w9p]

is this process same to all model? specially at audi a7 with 5 volts supply?

[@CliveTrigwell]

Hi. Can u please help with coil pack input signals aswell . My coil packs are over heating and melting

[@abdallahmohamedgelwah736]

Super thanks

[@Gabofer8a]

Why some vehicles use different part number for a sensor even when the Vehicle is the same but just a year or trim of difference. I usted a genérico crank sensor and Didn't worked well until I Got the original one. Why this happen?

[@Savage-lx5yj]

Excellent!

[@screwsnutsandbolts]

Thank you !

[@EVExpert199]

Thanks 👍

[@screwsnutsandbolts]

You're welcome !

[@trifaloialone9452]

Hi. I need your help. I am from Greece and i have a Lancia Musa 2006 mj 1.3 diesel automatic engine code 188A9000. Sometimes ussualy when the engine is cold car gives me an error "GEARBOX FAILED" for 2 seconds on the screen and the dissapaired. this can happen once a day or once on 3 days. When error pops up car works fine. I dont see eny difference. On OMD error says P1742. Car is working fine till now.I need your help please. Do you thinks is this a possible error?Thanks in advanced.

[@ประชาคําสุข]

Thanks you /very good.

[@screwsnutsandbolts]

Thanks for watching !

[@nyinyiaung9605]

Can we check Crankshaft sensor with meltimeter ?

[@mattmiles9779]

I also want to know.

[@DJrickardo_]

Yes, carry out a continuity test

[@jameswalsh3875]

I don't have a multimeter

[@RusellMagsalay]

Ok bos tnx😊

[@jameslight5127]

any and all things about the Chrysler Cirrus 1996 Chrysler2.5 v-6 Engine,Super Thanks.

[@terramoto_pt]

I'm getting ground and power reading on the plug. But absolutely no signal reading on both crankshaft and camshaft sensor plugs :(

[@mohammedlaredj7695]

Brilliant..super thanks..

[@screwsnutsandbolts]

You're welcome !

[@aryo2902]

Tq for sharing videos sir

[@screwsnutsandbolts]

Thanks for watching !

[@aleksandarantonijevic3644]

How to test camshaft sensor for micra 1.2 80hp ?

[@fatihaslan4147]

Did you solve the problem ?

[@PATRIOTIC-EAGLE11]

hello brother: i have 2011 chevy optra 1.6 engine, sometimes it doesn’t start after two or three trying but i disconnect the crankshaft sensor i reconnect it then it starts with the first try,

[@baljinnyamg]

Hey sir I check the temperature sensor and i short cut the positive and negative after that I can’t start my car could you please help on that problem

[@abdoulazizbal9299]

Very nice

[@screwsnutsandbolts]

Thank you !

[@BeettaJasarevic]

Where does the camshaft sensor stay on a 2012 bmw x1 4 cylinder ?

[@screwsnutsandbolts]

I haven't worked on one so I don't know, sorry.

[@oscarm5362]

I have the "check injection system" 0340 code on my 2009 megane 1.9dci plus check "anti pollution system" code. I swapped sensor, still have same issue, tried your test eith multimeter and everything seem normal, your signal voltage shows 9.60, mi e os 11.40 but i dont think rhat matters since when i touch the sensor with a spanner, numbers go down like they should. Any other help or info would be much appreciated. By the eay i had timing belt and drive belt replaced recently including crank pulley and the errors still exist. I also used dpf and whole diesel cleaner in hopes to get rid of the "check anti pollution" code. Code is still there. Is the engine busted or is there more that i can do?

[@screwsnutsandbolts]

It's hard to say. You'll probably have to have it looked at by a mechanic I'm afraid. This forum may be worth a look: www.renaultforums.co.uk/threads/renault-megane-ii-service-indicator-on-code-p0340.50664/

[@shafiqahmed9423]

Thanks❤

[@screwsnutsandbolts]

You're welcome !

[@nanbabu3013]

Very nice❤🎉

[@screwsnutsandbolts]

Thank you !

[@SajadPoretemad]

very good

[@screwsnutsandbolts]

Thanks

[@davebrown4699]

I only get a low voltage signal after I remove the ratchet from the sensor does this mean it's bad?

[@screwsnutsandbolts]

Does it do that every time or only occasionally ?

[@davebrown4699]

@@screwsnutsandbolts Everytime

[@tayoni800]

Can I test it with a 9v battery?

[@csonowal1714]

Hundai i20 sportz ka crank shaft position sensor price kita ha?

[@xmuro]

Very interesting

[@screwsnutsandbolts]

Thanks !

[@PatrocinioMansueto-rt8du]

Sir, pagnaputol ang pipe galing sa exuse pipe Hindi ba mag start

[@Garage12.]

Okay .. 👍 good

[@screwsnutsandbolts]

Thanks !

[@salamalaaraji122]

ما هو سبب التأخر في التشغيل عند الوضع start . .

[@alexhuerta1031]

I get a voltage of 5.02 on mine. Is that too low?

[@stevenpierre1987]

No. It's a 5v system so that's good. It should zero out if the sensor is working though

[@ndagijimanavincent1748]

yeap! it good !

[@hubertcover6902]

Hi my temperature gure keep going up and while driving and there's a course sound when i reach 50 and up mrh why

[@averyalt4324]

Tominata

[@aamirmustafa3374]

Thanks

[@kaaraa-mardha1977]

Does this mean that the sensor is Good 💯

[@johnniewalker6865]

Yes

[@screwsnutsandbolts]

Parts & Tools: 🚗 Multimeter ~ amzn.to/3Or7prL 🚗 Probes ~ amzn.to/44DqrAI

[@Oh-Jay52]

Nicely done video mate thanks ,

[@screwsnutsandbolts]

@@Oh-Jay52 Thank you !

[@ZakirHossain-ch2ke]

Good

[@screwsnutsandbolts]

Thanks !

[@perwez98]

GOOD

[@screwsnutsandbolts]

Thanks !

[@J.AUTO-RESET]

Supper❤❤❤

[@screwsnutsandbolts]

Thanks !

[@ttk6417]

Why my reading just show 2.4v something. Where's the problem

[@screwsnutsandbolts]

Is it the same vehicle as in the video ?

[@lesterluna3211]

Is the sensor bad or not?i don't understand at all😅

[@screwsnutsandbolts]

This sensor is good

[@jennoo2898]

Can you show us how to tighten the throttle cable please

[@screwsnutsandbolts]

On which car ?

[@ThatsPeekay]

i replaced the crank sensor and ignition coil but my car doesn’t start

[@screwsnutsandbolts]

Have you scanned for any error codes ?

[@HellsFinestUK]

I have the 3 wire sensor & I'm getting voltage on all 3 wires leading to sensor, no wonder my car wont start does anyone know what would cause this thanks

[@FoodHubLesotho]

Wiring harness

[@subcontinentpoetry7424]

❤❤❤