Crash Bars Heed BMW 1200RT 2005

Mounting crash bars on Rt1200 2005.
heedshop.eu/en...
Song: MBB - Ibiza (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • MBB - Ibiza (Vlog No C...
Song: Fredji - Happy Life (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • Fredji - Happy Life (V...
Song: Ikson - New Day (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • Ikson - New Day (Vlog ...
Song: Chris Lehman - Flash (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
Song: MBB - Ocean (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • MBB - Ocean (Vlog No C...

[@nwmarco]

Excellent video. Thank you for sharing. I have crashbars to install on my ‘08 R1200RT so is very helpful.

[@austinmatthews347]

lovely rt i had heed bars on my previuos rt i crashed at 60mph they bent in a bit and were dented but they saved the fairing and the cylinder

[@lipsee100]

Hi I have the same model year bike,,, My bike came with Wunderlich bars ,,but I would not fit bars NOW on my bike being so old and low value and has survived so long without them... But we all have different views and its your money,,whatever ride safe and lets hope you never need to use them

[@stanb5448]

At speed everything will be torn apart. Crash bars are only there to minimise some damages. The energy released is huge during an accident. Kevin Bone is right, every company is using mountings bolts on the engine case (made of aluminium at the bottom).

[@echasrod]

queda muy bien, si me permites una observación, te falta el tornillo de seguridad del eje de la botella derecha.

[@etiennelau3254]

How did you get the engine through bolt in and out without compressing the front suspension?

[@vajdo]

Easy. Put the bolt through the hole and the same time removing original bolt from hole. One side in, the other site pull old bolt out. Suport engine with lift jack.

[@etiennelau3254]

@@vajdo So you did not need to hammer the bolt? I'll have to give it another try with supporting the engine, I cannot even pull the old bolt out and I don't want to continue hammering the old bolt.

[@vajdo]

@@etiennelau3254 sorry. Yes, i need the hammer. I can't pull the bolt out to. So i use the hammmer to remove original bolt and the same time put the new bolt.

[@etiennelau3254]

@@vajdo Thank you for the help. I got them installed!

[@declanbarry6213]

Did you have to compress the shock to get the bolt out cheers Declan

[@samuelsteffen5615]

Your video is good but beware!!!!! I had these crash bars on my 2006 r1200rt and i dropped the bike. The problem is that the bolts that go into the bottom of the engine were torn out and broke a hole about the size of a quarter in the crankcase and all the oil drained out....... Well this rendered the bike a total loss unless I wanted to replace the engine. Sooooo..take these off immediately.

[@GTMMC43AMG]

Thanks 👍

[@kevinbone5848]

From what I have seen almost all of the crash bar companies use mounting bolts on the engine cases! After all the engine is a stressed part of the frame. Was this a crash at speed that broke the bolt out of the case?

[@luishcoreia]

How did you get the pipes so clean?

[@arthurarthur2165]

👍💪🇩🇪