Pick the JCB | Breakdowns | Bailer Issues | Grain Drier Fix

[@DeirdreHickey-nx8nt]

Have to say Crawford you are fairly handy to have about the farm. You know your stuff. ❤️❤️❤️❤️❤️

[@i.f.colville2497]

You hit all the problems with the "long " JCB on the head,we had both models at our depot in Amsterdam it had no power because it doesn,t use AD BLUE.we also changed the control lever hyd pipes around so it worked the same as all other makes! I don,t know why it has not dawned on JCB that the lever operation is alien to most experienced operators,we found it to be dangerous when jumping from machine to machine.

[@garymadden2656]

Great video Crawford 👌

[@jameswardle7977]

Claas do the best combines in my opinion round balers not so much. Hopefully the rest of harvest will go smoothly. We’re just about to start putting it all back in down here. Keep up the great videos

[@keithmckenna7447]

All I ever want to see/hear is you turning the camera on the sheep and then saying BANDITS 😂

[@habslover2306]

I too look forward to Crawford having issues with his two bandits. I enjoyed the black sheep that Lulu played with the first year I watched. But I really enjoy the movie of these two rovers.

[@habslover2306]

*moxie

[@cityguyinthecountry]

He has a great personality, I enjoy his videos

[@georgearmstrong9106]

that loadall would be handy with grain pusher

[@PK_Blinder]

Looking at that chain, why am I thinking of Triggers Broom... 😏

[@Starkagri]

CLAAS still using that cam on the netting system. Unbelievable. Will probably be a ridge worn on the cam arm. Take off buff down put back on. Ancient system. First had it on a rollant. 30 plus years ago.

[@wulliewhyte544]

Have to buy kev a fendt baler to match his tractor

[@hallambrown977]

We’ve got the same bowser we run ours with the filler cap off it allows more air into the tank

[@jdalston9029]

Got a new 532-60 replaced a loader like your older one also have 536-60. 532 does everything bigger loader does handles 2 ton bucket fine no safety sensors just works like 536. As for baler get rid and buy a McHale.

[@brendanwhite9799]

You may buya good Irish made baler a McHale the best baler makeing . Ps I dont work for them

[@themootankclan]

Not sure about the door, but I know new forklifts have a sensor in the other glass so you can’t operate it with a broken window, there have been instances of people looking out of a missing side window and getting trapped under the lowering boom 😮

[@ThingyGoos]

The ones I've driven have never cared about either door section. As long as there's someone on the seat it'll drive and move the boom

[@themootankclan]

@@ThingyGoos our new Krammer certainly lets you do everything with the top half open, think the bottom half has to be shut though (and someone on the seat of course)

[@DeadeyeMonkey]

Imagine the grain pusher on the end of that 12m *BOOM*.

[@forcesfarming8511]

5:20 Did you feel a little bit like Tom Lamb? 😮😊

[@willyfindlay4398]

How many square ⬛️ meters is the new 50kw solar array on the shop roof ??? Good luck with the Barley 😊

[@leomoralee9534]

Having watched your podcast, thought I mention my experiences of using glyphosate. Farming for over 40 years using glyphosate I now have NHL ( blood cancer ) my consultant who runs the top hematology dept. In England told me by using glyphosate I am 25 times more likely to get NHL this is her experience. During my treatment I have met a number of farmers who are in the same position as me. So be very careful usi g it. Also on costs , yes sowing is cheaper but don't forget extra passes and cost of chitting and spraying . Possible loss of yield. Big factor is also lack of control of grass weeds in barely. Plough and combo for me .

[@byronlovesey1290]

Have you ever tried a cat forklift a fried who is a farmer has one and far better than jcb , I drove jcb on building site for 7 years and couldn’t believe I would ever go to the cat side but everything about them is a lot stronger

[@Rhyswilliams1]

Should demo a Kramer we prefer it over jcb

[@grahamkerr7436]

Using the metric adjustable this time!!😂

[@cliffthegardener]

@Crawford the optician. Which is better 1 or 2...

[@jgdairysmart8948]

The new ones still work with the door half open

[@SB-dv8ih]

Construction spec machine controls are different to normal so you can’t accidentally tip the forks. You need to use the second lever. It takes a bit of getting used to.

[@jodydarling6811]

Hi, have you tried a different brand of net, I had that bother with a new Holland and different net worked

[@engir63]

The chain broke because you did not oil it like the one you put on in the video you did not clean up the area and oil the chain

[@antnewbon2673]

Bandit. Haa ha.

[@davidangus2456]

Claas balers are rubbish better with a Mchale or mf/welger