Crawler Canyon Presents: The Truggy Boy Six Gate

I feel like we haven't done a proper Six Gate in a long minute-- and I dunno if this one is proper, but instead of cut up tennis balls holes got drilled, so we finally have something with a benchmark. We may well end up with a second line setup (I still have leftover gate markers) because honestly this one is a little tough.
Links
The Nameless
JCconcepts Creep(er) alnk.to/clV38Bx
Fossils alnk.to/4XtdWm3
Injora Deeps amzn.to/3Ot9SlV
KYX knuckle weights amzn.to/3Wk1OWp
RC4GS amzn.to/3HSg4Qe
Cheap, excellent HC link set amzn.to/3BKlaus
Hobbywing 1080 amzn.to/41bgisw
5-slot 540+ 20T amzn.to/3VHFB46
Hardline
Phoenix Portal alnk.to/e74gt8l
CreepER alnk.to/2Fz0I9a
RC6GS V3 amzn.to/3TuasjJ
KLR/M alnk.to/5F7TnVt
Incision Method MR307 alnk.to/c05aHkF
Flash Hobby 60kg amzn.to/3FBVKBz
JX 4409MG amzn.to/3JSXLeU
Ovonic 4S 1300 amzn.to/42o7bGE
IG: crawlercanyon

[@FaithSaraG]

I'm glad to see the return of the Six Gate.

[@BrandonM83]

His videos are consistently on when im wrenching. Or just in the garage in general. 😎😎😎😎

[@nathanwirth9906]

It’s my go to when wrenching myself!!

[@BrandonM83]

@@nathanwirth9906 he’s by far my favorite rock crawler guy. And his channel is just sooooo chill. And I always learn something 😎😎😎😎😎

[@derrickhays3627]

Another stress relieving episode all 3 have their strengths and weaknesses. Thanks so much.

[@FranklinUHyde]

Wonderful video. Thanks for sharing and you have a great voice for commentary. Liked & subscribed. To note... your course is bananas!

[@nathanwirth9906]

Another enjoyable installment!! 👍

[@Brian_Mowry__BMOW71]

This was fun! Can't wait to see more of these Six Gates! Thanks for posting rig info in the vid description. this answered a few questions that I had.

[@gibsonlife573]

I love it oh ground squirrel reminds me of myself so easy to get sidetracked thank you buddy for what you do

[@nicholasstephey8475]

Truly like the comparison and competition videos. ❤.

[@JPWirt]

I like the addition of a permanent 6 gate. That's a tough course for sure!

[@drowildcat2960]

Another great video thanks canyon

[@nickdaniels9680]

First like and view, I have been hooked on watching all your videos lately. Hope you had a good weekend at the canyon!

[@CounterproductiveproductionDIY]

I think this may be a Crawer Canyon Olympic course? I noticed your hand is possibly infecting under that scab, possibly a concrete burn going on, when I was doing concrete, I found out white vinegar on your hands afterwards will help neutralize the lye in the cement. I would soak that hand in warm water, scrub that scab off, pour white vinegar on it a few times and start over. Duct tape may not be best for your skin, but I have used it to keep wounds free of the concrete dust. I know for some guys once they get allergies to concrete. It never goes away. And you have lots of work to do to make it to your goal: Crawler Canyon Disney land!!! Thank you for all your work for our entertainment value.

[@CrawlerCanyon]

The scab looks worse than usual because I keep hitting it on stuff, which feels fantastic. But it's not itchy or warm, so I figure it's still on the mend.

[@CounterproductiveproductionDIY]

@@CrawlerCanyon ok that’s good. Just making sure your taking care of You too.! Have a great night

[@Shakermt]

That was fun to watch and that course is tuff. I almost think Hardline might be better off on 3s to tame the wheel speed down? I also think those KLR's like slow speed better. Would anyone be upset if a gloat over my truck winning lol. j/k

[@CrawlerCanyon]

I think the first step is using the PC app to try to dial the Rhino down to a reasonable output. I love a servo on 4S, but this guy definitely needs a bit a punch dialed out. Very positive note: following the run, the Rhino was cold, and the Yellowjacket was slightly warm, probably 100-110º, beyond acceptable for a motor that tiny.

[@Backyardcrawler]

Sharp trucks

[@JIPPERR_1]

Hammer drill FTW, permanent gates is a good idea, is it hard to tell if they get hit? I guess it would be with non-permanent gates anyhow.

[@daveovington5525]

Definatelt a tough course but there were definatelt some lines that looked passable but werent tried , so i think you should be able to see alot better scores in the future. Great course though !!

[@BrandonM83]

Question. What is the little bumper delete bar on the back of daphne. Is it aftermarket or a canyon creation ?

[@Shakermt]

Daphne wasn't out there but the Nameless is a custom delete if I remember right.

[@BrandonM83]

@@Shakermt okie doke. I kinda thought so. I’ve searched everywhere 🤣🤣🤣🤣🤣. Thanks 🙏😎

[@kellykuretich6366]

👍👍😁😁

[@Loose_Lucy]

I like this competition Nameless …. how about Dark Star ?

[@rccrawlingaddict207]

As many times as he rolled over, call him Thumper.

[@CrawlerCanyon]

I think Hardline rolled the most. Which is not saying that I counted, because I did not.

[@rccrawlingaddict207]

Gate hit @13:50....not counted. Ghost rover is definitely the LCG leader in the group. You may have actually created a weapon? How much you want for the Ghost?

[@CrawlerCanyon]

He ran over that gate anyway, so the score wouldn't have changed. I couldn't see it while filming, and didn't catch it in the edit either.

[@Rombo-86]

I also saw it in the video. But as you say I ran it over later anyway.

[@reynaldohernandez6777]

First!

[@jluis5188]

I remember joining this channel when it was good clean hobby fun. Now it's become a machine spitting out anything and everything just to get videos monitized and up for views. Un-sub*😢 Also the gibberish that comes along with the new videos is hard to follow. RIP CC!

[@CrawlerCanyon]

If this is satire, it's great. If it's not, I have absolutely no idea what you're talking about. This would be like... the 13th official installment of the Six Gate series, not including any of the Wheelin' Wednesday match-ups, and ignoring the entirety of The Invitational, which was TWENTY SEVEN EPISODES of head-to-head Six Gate competitions. I reckon there are over 50 individual episodes of Six Gate competition, dating back to the first one I did around 18 months ago. To quote Mastodon, "You came here. Watch it. Don't like it? Walk out."

[@JdubU]

Makers look like votive candles “💡” which gave me an ideal for a night crawl. ✌🏼🛻