Comparing Our Crawl Space Encapsulation Packages

Are you considering hiring Crawl Space Ninja to encapsulate your crawl space, but you're a little confused as to what all of your options are? In this video, Michael compares all of the crawl space encapsulation packages we offer and what is included in each of them. Need a quote? crawlspaceninja.com/free-asse...
🔴 Essential Guides to Crawl Space Encapsulation, Waterproofing, and Wood Rot Fungus crawlspaceninja.com/tag/essen...
{Last 5 Blog Links}
1. 8 Suggestions on Using Anasphere Plus crawlspaceninja.com/product-r...
2. Is an Indoor Air Quality Assessment Important? crawlspaceninja.com/faq/iaq-a...
3. Winterizing Your Crawl Space crawlspaceninja.com/insulatio...
4. Best Moisture Level for Wood in Crawl Space crawlspaceninja.com/faq/best-...
5. Extra Large Capacity and Quiet Dehumidifier crawlspaceninja.com/product-r...
{Last 5 Video Links}
1. What to Do When Water Gets On Top of Vapor Barrier • What to Do When Water ...
2. Understanding Radon w/ Bruce Snead (Director of Engineering Extension at KSU) • Understanding Radon w/...
3. What's the Quietest Aprilaire Dehumidifier? • What's the Quietest Ap...
4. How Quickly Should You Reinsulate Your Crawl Space When Encapsulating? • How Quickly Should You...
5. Things to Know When Buying a Home w/ a Crawl Space • Things to Know When Bu...
{Top 2 Crawl Space Ninja Playlists}
1. Crawl Space Ninja Myths • Crawl Space Myth #1 - ...
2. Ask A Ninja (Season 2) • Crawl Space Dehumidifi...
---------------
🔴 Popular Crawl Space Ninja Education Pages:
crawlspaceninja.com/crawl-spa...
crawlspaceninja.com/crawl-spa...
crawlspaceninja.com/crawl-spa...
crawlspaceninja.com/crawl-spa...
crawlspaceninja.com/water-in-...
crawlspaceninja.com/crawl-spa...
---------------
Would you like us to provide a quote?
🔴 crawlspaceninja.com/free-asse...
---------------
Would you like to DIY your crawl space or basement?
🔴 Purchase DIY Products - diy.crawlspaceninja.com/
---------------
Start a Crawl Space Ninja in your area:
🔴 Franchising - franchise.crawlspaceninja.com/
🔴 Most Popular Video - kzbin.infovideose...
🔴 Most Recent Video - goo.gl/H3QZtt
🔴 SUBSCRIBE - goo.gl/NkXFkf
---------------
Do you have a question for Michael Church and would like your question to potentially become a video?
🔴 Ask A Ninja - crawlspaceninja.com/ask-a-ninja/
---------------
Contact us:
Crawl Space Ninja
CrawlSpaceNinja.com/
Mailing address:
6011 Ridan Drive
Knoxville, TN 37909
[phone]
Crawl Space Ninja Service Area:
crawlspaceninja.com/service-a...
Knoxville, TN
Chattanooga, TN
Nashville, TN
Marietta, GA
Alpharetta, GA
Athens, GA
Columbus, GA
Augusta, GA
Atlanta, GA
Raleigh, NC
Charlotte, NC
Durham, NC
Wilmington, NC
Winston-Salem, NC
Greensboro, NC
Delaware
Winston-Salem, NC
Greensboro, NC
Tennessee
Georgia
North Carolina
South Carolina
Kentucky
Disclaimer - Please understand that the content on the Crawl Space Ninja KZbin channel is intended for informational purposes only. We make no warranties about the completeness, reliability, and accuracy of this information. Any action you take upon the information posted on our KZbin channel is strictly at your own risk, and we will not be liable for any losses and damages in connection with the use of our KZbin channel.
0:00 Introduction
0:57 Bronze Package
2:39 Silver Package
4:36 Gold Package
6:09 Platinum Package
6:37 Package Add-ons
7:38 On a Budget?
#CrawlSpaceNinja

[@james-yc4jx]

have you ever considered attaching the vapor barrier directly to foam board with butyl tape instead of going over the top and mechanically fastening to block? My thought on this is sometimes butyl tape will not stick to concrete block if it is moist but it would stick very well to the clean and flat foam board. Then, just seal the top edge of foam board where it meets the block wall making sure to leave the termite inspection gap. Also seems like getting the vapor barrier corners tight would be more difficult when you pull the vapor barrier over the top of foam board

[@CrawlSpaceNinja]

Thanks for sharing and watching, have a blessed day

[@domepiece11]

As long as you can figure out how to air seal it, it would work.

[@ic3p1k]

When you mechanically remove the mold, do you go over every bit of visible wood or just where you actually see mold?

[@CrawlSpaceNinja]

Hey ic3p1k, We go over all of the wood. Check out our playlist of videos about mold. kzbin.info/aero/PLxsYiAum9ovzU5iBtKvqF_fVs8wI4G22U Thanks for watching and have a blessed day!

[@9Packin]

Is there a reason Indiana isn't listed as franchise opportunity? Just curious.. We have very humid summers, seems like a good market.

[@CrawlSpaceNinja]

It can be but Indiana requires a special registration. When someone is interested we can register there. Thanks for asking.

[@yasserd86]

Any service in northern Virginia!!!!!

[@CrawlSpaceNinja]

I'm sorry, we currently do not cover northern Virginia. Thanks for watching and have a blessed day.

[@noahmurray4633]

Any service in New Jersey?

[@CrawlSpaceNinja]

Not yet, sorry

[@StayHandy]

Hey Michael. I plan to create a DIY guide to crawl space encapsulation on my channel (110K subs). Wondering if you're interested in potentially being involved as a sponsor/collaborator. I appreciate all of the content you've published and figured it would be a great way to promote your DIY store while improving the quality of the video I produce.

[@CrawlSpaceNinja]

Hello, could you please reach out to our Marketing Manager, Michael Wiseman, at [e-mail]? He would like to gather some more information.