Crazy Loud catless downpipe install (Open downpipe!!)

[@farmonious420]

Great video man! So many tubers skip over sizes and specifics. Very helpful for my upcoming dp install on my speed. Keep up the good work. Thanks for the help.

[@Luminary_Industries]

Np man! Glad this can help you. Thank you! ❤

[@evannarvais]

Subbed like ur videos alot

[@Luminary_Industries]

B7Evan /// Thanks man! I really appreciate it! Welcome! 🙏

[@TheWegus]

Bro, your audio needs major help. Very, VERY right channel heavy. And a word of advice, get it tuned! Those OTS maps are horrible! Best ~$200 bucks you'll ever spend on your car!

[@Luminary_Industries]

I am Wegus ik my camera got oil and coolant on the camera during the install and i assume the audio got damaged unfortunately. As for a tune you are correct the ots maps are garbage, but this was a few months ago, i am fully tuned on 91 now. Thanks for your feed back man. 🙏Also you are right, custom tune is smiles per gallon!

[@alexpedroza872]

I’m in the process of throwing my downpipe on and one of the bolts came out with the stud. Did you end up buying a new one when it happened to you?

[@Luminary_Industries]

I retightened the stud, and as far as the nut goes; It was loose. It went back on well.

[@Bealio]

When and where do you use the M10 3- inch bolts you show at 4:43?

[@Luminary_Industries]

They're for the mid to cbe flange. You will need them to connect the two.

[@Bealio]

@@Luminary_Industries Are the original bolts too short? Do you install the springs with the bolts?

[@Luminary_Industries]

@@Bealio you'll have two sets of springs, one you use and the other you store away, and the bolts are welded.

[@TheRealBlakester]

So @4:30 how exactly does threadlocker make bolts easier to remove in the future? Just curious...

[@Luminary_Industries]

So theres a couple, which are color coded. The Threadlocker used in this video is designed for the locking and sealing of threaded bolts, fasteners, ect, which would require disassembly for future services. It Prevents rusting of threads that can be removed with hand tools, but it also prevents loosening of bolts, fasteners. And what not caused by vibrations. Theres another version, which would bond that will prevent or make it hard to remove a bolt. You want the first, which was explained. Unless you want future accidents to occur.

[@TheRealBlakester]

Jorgiie's Channel so threadlocker doesn’t lock threads, it frees them? Does that mean anti-seize will help keep bolts locked together? I’m confused and now have blue threadlocker all over my truck. It looks like a 3 year old went crazy with a crayon. Help

[@Luminary_Industries]

@@TheRealBlakester You may understand it visually. If you're a visual learner; I'd suggest to buy both types, and test them out, in order to visually see and get an understanding on how it works.

[@TheRealBlakester]

Jorgiie's Channel so if I use both threadlocker and anti-seize, will it be tight and loose?

[@Luminary_Industries]

@@TheRealBlakester Well, once you test them out; I'm sure you'll get an answer, since you'll be able to experiment with it. Goodluck. ❤

[@ivan_Golfs]

How much was the downpipe and how much was it to get extended

[@Luminary_Industries]

130 i believe, and 40 for extension

[@jrgalindo1345]

Did you use the gasket that you got from eBay or OEM?

[@Luminary_Industries]

I used the poem gasket. I retained the stock one.

[@speed_goonie4999]

Howd you get by with the emissions test?

[@Luminary_Industries]

Stock is replaced 👍

[@noah.f.0284]

Where is the launch video.

[@Luminary_Industries]

It was just a demonstration of launch control.

[@jrpjoker]

What brand down pipe?

[@Luminary_Industries]

Jose Plascencia ebay believe it or not!

[@jrpjoker]

Dna performance?

[@Luminary_Industries]

Jose Plascencia Actually by speed daddy i believe.

[@XxSmilexX502]

Do you have any problem with o2 sensor bank 1 sensor 2 bro?

[@Luminary_Industries]

Secondary o2 will go off, but it's normal until custom tune is acquired to remove it.

[@Michaelc3094]

Or you weld an o2 bung extension works great

[@XxSmilexX502]

@@Michaelc3094 thank bro

[@franklinenciso5471]

Im also on open dp for now, waiting in till I get the new catback, but I got a CEL P0421 warm up catalyst efficiency below threshold (Bank 1) im kinda worried 😣

[@pablolopez462]

@@franklinenciso5471 what does that mean

[@devildog-hk6ul]

Do you need to get hpfp internals before the dp?

[@Luminary_Industries]

devildog1112 Yes sir. If you dont, you will risk it and blow. Everyone that always asks. I recommend ap and internals. Play it safe buddy. Even a perfect motor can blow.